My Cart: 0 item(s)

 

Secure Checkout
Soft Close Bench Seat Stay
    Soft Close Bench Seat Stay
    Purchase Soft Close Bench Seat Stay
    Soft Close Bench Seat Stay SKU #: G10040 Not Rated Yet

    Soft Close Bench Seat Stay

      Product Name Qty
      Light Duty Soft-Close Bench Seat Stay, Left SKU# 658986 $33.00
      Light Duty Soft-Close Bench Seat Stay, Right SKU# 658987 $33.00
      Medium Duty Soft-Close Bench Seat Stay, Left SKU# 658988 $33.00
      Medium Duty Soft-Close Bench Seat Stay, Right SKU# 658989 $33.00
      Heavy Duty Soft-Close Bench Seat Stay, Left SKU# 658990 $33.00
      Heavy Duty Soft-Close Bench Seat Stay, Right SKU# 658991 $33.00

      Overview

      • Important Information - Please read before ordering:
        • Sold by the each but designed to be installed in "pairs"
        • Make sure to order one Left Hand model AND one Right Hand model. The stay shown in the image above is the right hand model
        • Make sure to do the weight calculation before ordering
        • All weight calculation results are based on using two stays per lid (a Left Hand and a Right Hand)
      • Heavy duty soft-down lid stay for toy boxes, bench seat lids, etc.
      • May be used on both overlay lids and inset installed lids (click on links below for install pages)
      • This product is used with hinges (sold separately):
        • Works with butt hinges, piano hinges and concealed European style hinges
        • See install pages below for installation information on these different types of hinges
        • For a lid thickness and box wall thickness of 3/4" on an "inset" lid you can use the following:
          • Hinges: Use our SKU 701154
          • Mounting plates: Use our SKU 652296
          • Screws: Use our SKU 652360 (two screws per hinge and two screws per mounting plate)
          • Use a 3/16" (5 mm) bore distance and it will give you a 2 mm reveal or gap between the lid edge and side panel
          • The bore distance is the distance from the edge of the lid to the edge of the 35 mm hinge hole
        • For a lid thickness and box wall thickness of 3/4" on an "overlay" lid you can use the following:
          • Hinges: Use our SKU 701152
          • Mounting plates: Use our SKU 652296
          • Screws: Use our SKU 652360 (two screws per hinge and two screws per mounting plate)
          • Use a 5/16" or 8 mm bore distance to achieve a full overlay of the 3/4" thick box wall.
          • The bore distance is the distance from the edge of the lid to the edge of the 35mm hinge hole
      • Available in 3 weight rated sizes:
        • Light Duty (121 to 173 inch/pound weight rating per pair)
        • Medium Duty (173 to 216 inch/pound weight rating per pair)
        • Heavy Duty (216 to 260 inch/pound weight rating per pair)
      • Weight Calculation (Torque):
        • Door Height (DH) is the front-to-back (or height) measurement of the lid in inches (for example 24.5")
        • Door Weight (DW) is in measured in pounds (lbs) (for example 10.3 lbs)
        • The formula is DH x DW x 1/2 = Inch/Pounds
        • Match your result with the proper size above
        • Using our example measurements 24.5 x 10.3 x 1/2 = 126.18 Inch/Pounds
        • For 126.18 Inch/Pounds you would use a pair (one Left Hand and one Right Hand) of the Light Duty Stays
      Sugatsune
      70 Degrees
      Yes
      Prop 65 Warning
      You're reviewing Soft Close Bench Seat Stay
      Rate Product
      No Reviews Yet

      2 Questions asked about Soft Close Bench Seat Stay

      Q Diana Engbrecht • 02/07/2018, 11:24:39 PM re: soft close bench seat stay....would a pair of "heavy duty" be adequate? The storage chest lid is 31.5 lbs and depth is 18 in...according to configuration the inch wt would be 283.5 ..... your max available says 260...what do you think? Thank you. Diana
      A 02/08/2018, 3:22:13 PM Hi Diana. We can only recommend using these hinges for lids within the manufacturer's provided weight rating. Anything above would need to be at your own discretion.
      Q Amy • 11/22/2020, 11:40:48 AM Will this work on a piano bench? Depth into bench is just over 2.5” Thanks ~
      A 11/23/2020, 8:17:08 AM It will not work on an application with so little depth unfortunately. You may want to try this item here: https://www.hardwaresource.com/toy-box-lid-supports-weight-rated.html
      Estimate Shipping