Due to severe weather, some orders in the Southeast may experience shipping delays.

Blum  |  SKU: 701112

Blum Hinge Cup Spacer Plates

$119 Each
Type

Description

Clip Top Hinge Model

  • All Blum Clip Top type hinges require that the cup drilled in the back of your door is at least 13mm (1/2" deep).
  • Prior Blum Clip top hinges required a 12.5mm cup depth. We recommend that you measure the cup depth on your doors before ordering.
  • Many cabinet makers used a 13mm cup depth even though the requirement was only 12.5mm so yours may actually already be drilled to 13mm.
  • If your cup depth measures only 12.5, purchase this hinge cup spacer plate which you can install under the hinge cup to make up for the 0.5 mm difference.
  • This spacer plate works for both standard Clip Top Blum hinges and Clip Top Blumotion hinges.
  • Does not work for Blum's Compact hinges.
  • Note: This spacer plate is actually 1.5mm thick and will make up a difference of up to 1.5mm.

Blumotion Compact Hinge Model

  • Spacer plate for Blum's Compact Blumotion hinges.
  • For use under the hinge cup for thin or profile doors.
  • Does not work on Blum's standard hinges.
  • This spacer plate is about 1/16" in thickness.
  • Blum's Compact Blumotion hinges are available in two cup depth models: 7/16" or 1/2".
  • Examples of use:
    • If your door is drilled for a 7/16" cup depth, this spacer would allow you to use a hinge with a 1/2" cup depth.
    • If your door has a beveled edge or a profile that only allows you to drill a 3/8" cup depth, you could use this spacer and a shallow model (7/16" cup depth) Compact Blumotion hinge.

Warranty

Limited Warranty
Blum, Inc. (Blum) warrants its lift systems, hinges and/or drawer runners,
contained in this product, but not the product itself, against defects in material
and workmanship for as long as the original consumer purchaser owns the
products. This warranty is a warranty of replacement only. Blum specifically
does not warrant removal of the defective hardware nor installation of new
hardware. This warranty does not cover hardware which has been incorrectly
installed, exposed to excessive loads or otherwise used in any manner contrary
to its intended purpose. In the event the defective Blum hardware is obsolete or
has been discontinued, Blum reserves the right to replace the defective
hardware with a current offering. No guarantee of interchangeability is offered.

Other terms and conditions:
ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED AS SET FORTH ABOVE.

However, some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY STATE LAW AS
HEREBY LIMITED, THE FOREGOING EXPRESS LIMITED WARRANTY IS
EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES OF BLUM WITH
RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PROPS OR PARTS.
IN NO EVENT SHALL BLUM BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES RESULTING FROM THE USE, INSTALLATION, PERFORMANCE OR
FAILURE OF ITS HARDWARE.

However, some states do allow the exclusion of limitation of incidental or consequential damages, so the above exclusion may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Store Policies & Information

Shipping & Delivery
Returns
Contact Us

We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.

Page Code: C10718

  • Manufacturer
    Blum
  • Material
    Plastic

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Discover
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

A table comparing the facets of 4 products
Facet
Blum 110 Degree Straight Arm Hinge
View details
Blum 120 Degree Straight Arm Hinge
View details
Blum Blumotion Compact Hinge, Standard Cup
View details
Blum Compact 33 - Hinge Only
View details
Price
Price
$259 Each
$349 Each
$349 Each
$399 Each
Description
DescriptionThis product page is for the hinge only. It does not include the mounting plate and screws needed for installation. For further details... This product page is for the hinge only. It does not include other required components, such as mounting plates, and screws. Please reference... Compact one piece European hinge with built-in Blumotion. Features Blum's Blumotion soft close mechanism which allows the cabinet door to close softly without... Installation: Mounts into a 35mm cup in the back of the cabinet door. Cup depth is 1/2". The bore distance (the distance from...

We Are Here to Help

Get expert assistance with product selection and more.

Frequently Asked Questions

How long does it take to get my hardware once it's been ordered?

The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.

Do you ship merchandise outside the United States?

At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email info@hardwaresource.com with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.

I have a hinge that I am trying to replace but I need help identifying it. Can you help?

Yes! Please click here to visit our Hinge Finder page.

Some of your hinges are sold by the each and some sell by the pair. What is the difference?

When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.

I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?

Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.

What is your return policy?

You can see our complete return policy here: HardwareSource Returns