Due to severe weather, some orders in the Southeast may experience shipping delays.

Blum  |  SKU: 701141, 701171, 652360

Blum 110 Degree Hinge for Back-to-Back Overlay Cabinets - Bundle

$603 Per Bundle

One bundle includes 1 hinge, 1 mounting plate, and 2 screws for the hinge. Screws for the mounting plate sold separately.

Description

  • Blum's half cranked clip top hinge for back-to-back doors.
  • Please see the "Reveal & Overlay Information" document below to verify if this bundle will work for your application.
  • ADVISORY: This hinge requires that the cup drilled in the back of your door is at least 13mm (1/2" deep). Prior Blum Clip top hinges required a 12.5mm cup depth. We recommend that you measure the cup depth on your doors before ordering. Many cabinet makers used a 13mm cup depth even though the requirement was only 12.5mm so yours may actually already be drilled to 13mm. If your cup depth measures only 12.5, purchase the hinge cup spacer plate which you can install under the hinge cup to make up for the 0.5 mm difference. The hinge cup spacer plate is offered as an optional accessory.

What's Included

  • 1 Blum Half Cranked Hinge (Blum #71T3650)
  • 1 Blum 0mm System Screw Frameless Mounting Plate
  • Two #6 x 5/8" screws for the hinge

Mounting Screws for Mounting Plate (Not Included)

  • Depending on cabinet side wall thickness you will need either of the following screws for the mounting plate:
    • For cabinet wall thickness of 5/8" to 7/8", you will need to use back to back mounting screws.
    • For cabinet wall thickness of 1" or greater, use #6 x 5/8" screws.
  • Note that only two back to back screws are required for two hinges, whereas you would need four #6 x 5/8" screws for two hinges.

Available for purchase separately:

  • Cover Plate for Arm Part of Hinge - Hides the screws on the hinge arm providing a cleaner appearance (SKU 268002)
  • Cover Plate for Cup Side of Hinge - Hides the screws on the cup side providing a cleaner appearance (701156)
  • Soft-Close Add-On Device - Eliminates slamming of the door and dampens the closing action (SKU 268233) 
    • Note: Soft close does not work with free swinging hinge.
  • Cup Spacer Plate - For doors with only a 12.5mm cup depth (SKU 701112)
  • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
  • Restriction clip. Limits angle of opening to 86 degrees (SKU 701113)
  • Blum Touch Latch for Self-Closing Doors (SKU 268822)
  • 35mm Forstner Bit, for new installations (SKU 204000)
  • Ecodrill, installation jig, for new installations (SKU 701000)

Store Policies & Information

Shipping & Delivery
Returns
Contact Us

We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.

Page Code: B10101

  • Manufacturer
    Blum
  • Model Number
    Hinge: 71T3650
    0mm Plate: 175H9100
  • Finish Name
    Nickel
  • Material
    Steel
  • Cabinet Door Type
    Half Overlay
  • Soft Close
    No
  • Self-Closing
    Yes
  • Plate Connection Type
    Clip-On
  • Opening Angle
    110 Degrees
  • Cup Diameter
    35mm
  • Screw Hole Spacing
    45mm (1-3/4")
  • Mounting Hardware Type
    #6 x 5/8" Screws included for the hinge side. Screws for the mounting plate sold separately (see description for details)

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Discover
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Related Products

A table comparing the facets of 5 products
Facet
#6 x 5/8" European Hinge Screw
View details
Back to Back Screws
Back to Back Screws
View details
Blum Cover Plate for Cranked Arm Hinges
Blum Cover Plate for Cranked Arm Hinges
View details
Blum Hinge Cup Cap
View details
Soft-Close Clip On Devices for Blum Hinges
View details
Price
Price
$006 Each
$178 Each
$059 Each
From $039 Each
From $269 Each
Description
DescriptionSpecially made for European and Blum hinges. Steel base material. This #6 screw is for most European hinges and mounting plates. The #7... This screw is for European hinges used on back to back or twin overlay doors where the hinges are installed back to back... Blum cover caps are designed to cover up the screws on Blum hinges. Gives Blum European hinges a more elegant, finished look. Cover... Cover caps cover up the screws on your Blum hinge Easily snap onto Blum "Clip Top" hinges. 110 Degree Model Works on any... This Blumotion soft-close device allows cabinet doors to close without slamming. The braking system inside the device creates a perfect closing motion. Works...

We Are Here to Help

Get expert assistance with product selection and more.

Frequently Asked Questions

How long does it take to get my hardware once it's been ordered?

The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.

Do you ship merchandise outside the United States?

At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email info@hardwaresource.com with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.

I have a hinge that I am trying to replace but I need help identifying it. Can you help?

Yes! Please click here to visit our Hinge Finder page.

Some of your hinges are sold by the each and some sell by the pair. What is the difference?

When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.

I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?

Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.

What is your return policy?

You can see our complete return policy here: HardwareSource Returns