My Cart: 0 item(s)
Overview
- 3/8" Inset, self-closing semi-concealed hinge.
- The center-to-center screwhole dimension for the hinge wing that mounts on the face frame is 2-1/8".
| Manufacturer | Amerock |
| Material | Steel |
| Cabinet Door Type |
3/8" Inset |
| Self Closing | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hardware Type | Matching wood screws |
| California Residents | Prop 65 Warning |
You're reviewing
Semi Concealed 3/8" Inset Hinge
No Reviews Yet
4 Questions asked about Semi Concealed 3/8" Inset Hinge
Q
Jean • 12/08/2017, 6:38:18 AM
Is hinge self closing?
A
12/08/2017, 1:26:14 PM
Yes, this hinge is self-closing.
Q
Cierra • 01/16/2018, 7:08:21 AM
I'm looking for this with a 1/4" inset. Do you carry these or know where I could find them?
A
01/16/2018, 10:45:56 AM
We do not carry any 1/4" inset hinges. 1/4" inset hinges are very rare and are going to be difficult to find. Searching the internet is going to be your best bet.
Q
Jeff Folger • 02/09/2018, 10:19:39 AM
Is it possible to buy black screws for the Amerock semi concealed cabinet hinges?
A
02/10/2018, 10:46:59 AM
Good news! These hinges include matching screws! If you purchase the black hinges they will come with black screws.
Q
Jim Fortese • 03/09/2018, 6:48:18 PM
Looking for brushed nickel hinges to match or co-ordinate with Stainless steel pulls on microwave, stove, dishwasher and fridge. The side that goes on cabinet frame is 9/16 wide by 2 in long with 2 screw holes at 1and 1/2 in centers. Side that screws to door is also 2 in long by 1 and 1/8 wide with 3 staggered screw holes .Cabinets are from the 1970's and I can't find hinges.
A
03/12/2018, 5:01:19 PM
Unfortunately, semi-concealed hinges are very difficult to find replacements for. They are not standardized so dimensions and hole spacing can vary significantly. Even small dimensions of the hinge pin can affect whether or not a semi-concealed hinge will work with your door. More often than not, the screw holes will need to be re-drilled for new hinges. To be sure these hinges will work for your cabinets, we recommend purchasing samples. We do have several different styles in Satin Nickel here;
https://www.hardwaresource.com/cabinet/cabinet-hinges/semi-concealed-hinges.html?hs_cabinet_door_type=484&hs_self_closing=389
Estimate Shipping
