My Cart: 0 item(s)
Overview
- For cafe and louvered doors.
- Hinges are double acting, they swing 90 degrees in each direction.
- The hold open model will hold the door open to about 90 degrees in either direction.
- They work by gravity, the weight of the door acts to return the door to the center closed position.
- Hinges are non-handed, they work on both right hand and left hand doors.
- Maximum door width is 30".
- For doors 7/8" to 1-5/8" thick.
- Order one set per door.
- PLEASE NOTE: The internal parts of this hinge are nylon. The nut on the bottom of this hinge should be "hand tightened" only. Do not tighten with a wrench.
| Finish Name | Zinc Plated |
| Material | Steel |
| Weight Rating | 50 lbs Per Set |
| Action | Double Acting |
| Mounting Hardware Included | Yes |
| Mounting Hardware Type | Matching Wood Screws |
| California Residents | Prop 65 Warning |
You're reviewing
Gravity Cafe Pivot Set
No Reviews Yet
4 Questions asked about Gravity Cafe Pivot Set
Q
randy wagner • 12/28/2017, 10:29:14 PM
How much distance is required between bottom of door and floor, and between top of door and the "header"?
A
12/29/2017, 2:14:09 PM
You will need at least 1-13/16" up at the top and 2-1/2" at the bottom, although you could mortise the bottom piece into the door if you wanted, as shown on the manufacturer's specification drawing here: https://www.bommer.com/images/templates/7512-T.pdf
Q
Pat Bashaw • 06/20/2018, 8:24:38 AM
Can these hinges be used on full size interior doors?
A
06/20/2018, 1:41:23 PM
Hi Pat! This is generally used on half/saloon/louvered doors and not full size doors.
Q
Samuel W. LaDuca • 08/21/2018, 1:03:07 PM
I need to modify a door with a curved top to accept the top hinge. Is there a mechanical diagram of the hinge available? Or, what are the dimensions of the top plate pieces?
A
08/21/2018, 2:23:21 PM
Hi Samuel! Here's a link to the template from Bommer's website for additional information.
https://www.bommer.com/images/templates/7512-T.pdf
Q
Elaine Hallett • 10/24/2020, 2:09:00 PM
We want to use a hinge such as this on 2 pairs of 1 3/8" oak cafe doors. Our builder is wondering if he must round the corners of the doors to allow for the pivot action once mounted?
A
10/26/2020, 8:10:46 AM
Rounding the corners of your doors will not be necessary when using that Gravity Cafe Pivot Set.
Estimate Shipping