Generic Pie Cut Corner Hinge - Bundle

Overview

• Generic European style hinge designed for corner cabinets. Also known as "Pie Cut" cabinet doors.
• This hinge attaches the middle door to the outer door.
• A pie cut corner door typically uses seperate 170 degree European style hinges to attach the two door assembly to the cabinet frame.

Installation

• Hinge cup size is 35mm.
• Maximum opening angle is 105 degrees.
• Requires a 3mm bore distance. This is the distance from the edge of the door to the edge of the 35mm cup drilled in the back of the door.
• Hinge and mounting plates are fully adjustable after installation.
• For door thicknesses of 5/8" and 3/4".
• For a 5/8" thick door order the 3mm mounting plate.
• For a 3/4" thick door order the 0mm mounting plate.

What's Included

• 1 x Pie Cut Corner Hinge
• 1 x Frameless Mounting Plate. Two sizes depending on door thickness:
• For a 5/8" thick door order the 3mm mounting plate.
• For a 3/4" thick door order the 0mm mounting plate.
• 2 x #6 Screws for the Mounting Plate
• 2 x Plastic Dowels and Dowels Screws (pre-attached to the hinge) - Dowels are typically used on manufactured wood or MDF doors because they hold better than wood screws. If you have a solid wood door, discard the plastic dowels and use either the dowel screws (blunt and slightly shorter) that come with the hinge or purchase #6 flat head wood screws (two per hinge, our SKU 652360).

Available for purchase separately:

• Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
• #6 flat head wood screws for the hinge side, can be used in place of the included plastic dowels and dowel screws (SKU 652360)
• 35mm Forstner Bit, for new installations (SKU 204000)