My Cart: 0 item(s)
Gate Wheels and Closers
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Per Set
Each
Each
There is nothing quite as frustrating as a gate that drags along the ground, making it difficult for it to move freely. If you are shopping for a gate that has dropped or started sagging, you came to the right place. As the leading source for hardware since 1892, HardwareSource has earned a reputation for personal service and a vast selection of products for DIY enthusiasts, homeowners, and professionals of all kinds. We offer a wide selection of sliding gate wheels, closers, and other parts that can help you prolong the life of your gate while also ensuring that the gate functions properly for years to come.
Are you dealing with a dropped or sagging gate?
A dropped gate doesn't do anyone any good, especially if yours is at the head of the driveway. That is why we try to make it as easy as possible for you to find the sliding gate parts you need, and for an affordable price.
Something as simple as adding wheels to your gate can go a long way toward extending its life and make the gate much simpler to use. The wheels you choose will depend entirely on the material used to construct your gate as well as the total weight. We offer a handful of sliding gate wheels, ranging from light-duty to heavy-duty. These hinged gate wheels are designed to support the unhinged end of your gate. Every wheel we offer is spring-loaded to absorb bumps beneath the gate, but our heavy-duty gate wheel does not swivel to ensure extra strength.
- Light-duty casters: 50-pound load capacity
- Medium-duty casters: 75-pound load capacity
- Heavy-duty casters: 88-pound load capacity
We also offer solid rubber gate wheels for round gate frame installations, or tubing sizes ranging from 1 5/8 to 2 inches.
Keep your gate secure by exploring our closers.
Whether you would prefer a small profile or an all-in-one solution to make your property more secure, we have you covered. Our selection of gate parts wouldn't be complete without a wide variety of gate closers to help you ensure that your gate closes behind you each and every time.
When you are in need of a heavy-duty solution, the commercial-grade exterior gate closer offered by Rixson is ideal wherever the highest level of quality is desired. This single-acting gate closing device is perfect for exterior ornamental iron gates weighing up to 250 pounds at private residences or on commercial campuses. All components are resistant to rust and the track features a "pass-through" hole to avoid debris build-up over time.
Hi-Lift's Kant-Slam hydraulic gate and door closer can be used on virtually any type of fencing material in residential and commercial applications. What's more, this hydraulic gate closing device complies with all self-closing swimming pool enclosure requirements and restrictions. By choosing the Kant-Slam gate closing system, you also won't have to deal with hissing sounds or slamming noises anymore.
Looking for an affordable self-closing solution? Look no further than our old-fashioned gravity-type gate closing device. Gate closers of this kind employ a steel ball and the force of gravity to close the gate. One advantage of gravity-type gate closers is that they do not have any springs or extra hardware, so they do not wear over time and you can maximize your investment in the long run. Plus, this closing device will make the perfect finishing touch to any old-world home.
We know how daunting it can be to shop online for hardware and parts. That's why our trusted hardware experts are on hand and ready to help you find the best solution for your particular set of needs. Chat with us online while you shop!
Single Acting: Single acting hinges swing in one direction.
Double Acting: Double acting hinges swing in both directions.
Double Acting: Double acting hinges swing in both directions.
Plain Bearing: Plain bearing is the simplest type of bearing. They are a good low cost option for lightweight doors.
Ball Bearing: Ball bearing hinges have ball bearings to act as a buffer between the knuckles. They tend to be quieter and more durable than plain bearing hinges. They are recommended for heavy doors and doors fitted with closers.
Roller Bearing: Roller bearings are able to support very heavy loads. Many of our heavy duty gate hinges are equipped with roller bearings.
Ball Bearing: Ball bearing hinges have ball bearings to act as a buffer between the knuckles. They tend to be quieter and more durable than plain bearing hinges. They are recommended for heavy doors and doors fitted with closers.
Roller Bearing: Roller bearings are able to support very heavy loads. Many of our heavy duty gate hinges are equipped with roller bearings.
Face Frame: Face frame cabinets have a “frame” that attaches to the front of the cabinet. The face frame gives the cabinet box extra strength while adding dimension to the door fronts. Face frame cabinets are commonly made by American cabinet manufactures.
Frameless: Frameless cabinets do not have a face-frame, and instead rely on thicker side panels for strength. Frameless cabinets are very common in Europe, but have steadily been making their way into America, as they lend themselves well to contemporary and modern designs.
Frameless: Frameless cabinets do not have a face-frame, and instead rely on thicker side panels for strength. Frameless cabinets are very common in Europe, but have steadily been making their way into America, as they lend themselves well to contemporary and modern designs.
The center to center is the distance from the center of one screw hole to another. Most manufacturers use this measurement to identify the size of the pull.
Square Corner: Square corner hinges offer an upscale look. Corners must be mortised by hand.
Radius Corner: Radius corners are typically only available on residential grade hinges. Corners are mortised using a router.
Radius Corner: Radius corners are typically only available on residential grade hinges. Corners are mortised using a router.
The diameter of the hole that is drilled into the back of the door to accommodate the hinge.
Decorative adornments on the top and bottom of the hinge's pin.
Single Demountable: Requires a slot be cut into the door.
Double Demountable: Requires a slot be cut into the door and the cabinet frame.
Double Demountable: Requires a slot be cut into the door and the cabinet frame.
Contemporary: Clean sleek lines. The most modern of styles.
Glam: Glitzy and glamorous
Global: These designs draw their inspiration from countries around the world.
Mid-Century Modern: Hardware inspired by the Mid-Century Modern movement of the 1950s.
Nature: Shapes and details from the natural world.
Old-World/Rustic: Many products of this style have distressed finishes and a handmade appearance.
Retro: Popular hardware designs from the past.
Traditional: Classic designs with thoughtful shapes and details.
Transitional: A nice blend of contemporary and traditional style.
Glam: Glitzy and glamorous
Global: These designs draw their inspiration from countries around the world.
Mid-Century Modern: Hardware inspired by the Mid-Century Modern movement of the 1950s.
Nature: Shapes and details from the natural world.
Old-World/Rustic: Many products of this style have distressed finishes and a handmade appearance.
Retro: Popular hardware designs from the past.
Traditional: Classic designs with thoughtful shapes and details.
Transitional: A nice blend of contemporary and traditional style.
Architectural Grade: Architectural grade hinges are typically used for custom doors and hardware upgrades. They are of higher quality and made of thicker material.
Residential Grade: These hinges are used in most tract type housing. They are relatively thin and best used on light weight doors.
Residential Grade: These hinges are used in most tract type housing. They are relatively thin and best used on light weight doors.
The product's measurement from top to bottom.
At HardwareSource we are proud to carry many top of the line manufacturers. You can filter products by some of our top brands here.
The substance a product is made from.
The measurement from one side to another when the hinge is in the open position.
The degree the hinge will open to.
The overlay dimension is measured from the edge of the cabinet opening to the edge of the cabinet door when the door is in the closed position.
Clip-On: Clip on hinges attach to the mounting plate by snapping into place.
One-Piece: One-piece hinges are permanently attached to the mounting plate.
Screw-On: Screw-on hinges attach to the mounting plate by securing a screw.
One-Piece: One-piece hinges are permanently attached to the mounting plate.
Screw-On: Screw-on hinges attach to the mounting plate by securing a screw.
Hinges without predrilled holes do not come with any holes for installation. Holes can be manually drilled into them at custom intervals.
To determine the screw hole spacing, on the door side of the hinge, measure the distance from the center of one screw hole to the center of the other.
The length of the screw from end to end.
The screw size refers to the diameter of the screw head.
Size 2 = 11/64"
Size 3 = 13/64"
Size 4 = 15/64"
Size 5 = 1/4"
Size 6 = 9/32"
Size 7 = 5/16"
Size 8 = 11/32"
Size 9 = 23/64"
Size 10 = 25/64"
Size 12 = 7/16"
Size 14 = 1/2"
Size 2 = 11/64"
Size 3 = 13/64"
Size 4 = 15/64"
Size 5 = 1/4"
Size 6 = 9/32"
Size 7 = 5/16"
Size 8 = 11/32"
Size 9 = 23/64"
Size 10 = 25/64"
Size 12 = 7/16"
Size 14 = 1/2"
Self closing hinges have a light spring action that prevents cabinet doors from hanging open.
Soft closing hinges prevent doors from slamming by quietly and smoothly closing the door.
Flush: For inset doors where the door is flush with the cabinet.
Offset: For doors that are only partially inset into the cabinet.
Offset: For doors that are only partially inset into the cabinet.
Some manufacturers test their products for weight ratings. For those that do not, you will need to use your best judgement when outfitting your door or gate.
