SKU: 796952

Mitre Hinge for Doors and Flaps, 90 Degree

$2985 Each

Fasteners Not Included


  • European style hinge for Doors and Drop Flaps with a mitred edge (45 degree mitre).
  • Hinge fits into 35mm (1-3/8") cups drilled in the back of the doors. See the document found under Downloads for drilling diagram.
  • Adjustable after installation:
    • 3 mm in height
    • 1.5 mm in depth
    • 1.5 mm in width
  • Construction:
    • The hinge cup is made from zinc die-cast metal
    • The hinge arms are made from steel
    • The entire hinge is zinc chromate plated
  • Made for the following Door, Drop Flap and Side Panel Thicknesses
    • Door or Drop Flap thickness range of 16 to 22 mm (5/8" to 7/8")
    • Side panel thickness range of 16 to 22 mm (5/8" to 7/8")
  • This hinge is sold by the each. You will normally order 2 hinges for each door or flap.
  • Click on links below for dimension, installation and adjustment information.

PLEASE NOTE: A Drop Flap normally needs a lid stay to help support the flap in the down position. This hinge is not meant to act as the only means of support for a Drop Flap.

Store Policies & Information

Shipping & Delivery
Contact Us

We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.

Page Code: 796952

  • Finish Name
  • Material
  • Plate Connection Type
  • Opening Angle
    90 Degrees
  • Cup Diameter
  • Screw Hole Spacing
    52mm (2-1/16")
  • Mounting Hardware Included
  • Mounting Hardware Type
    Four #6 Flat Head Screws

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Discover
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Be the first to write a review

Related Products

A table comparing the facets of 5 products
Small Flat Head Stainless Steel Screws
View details
Hettich Flap Hinge
View details
Metal Drop Flap Hinge
View details
Reversible Flap Stay
View details
Friction Type Lid Support
View details
From $103 Per Pack
$1589 Each
$997 Each
$1888 Each
$2497 Each
DescriptionThese screws are sold by the package. The number of screws per pack is listed next to the size. Desk flap hinge made by Hettich. For desks with a drop down front or flap. Hinge parts are mounted separately allowing disassembly of... Allows panel to fold down and hold at 90 degrees flush with the shelf it is hinged to. This concealed flap hinge fits... This drop stay gently lowers and holds drop down desk surfaces and flaps. Meant to be used with separate hinges shown in Related... Lid support is convertible, reversible, adjustable and demountable. Can be used on a horizontal lid, a vertical lid or a drop down lid....

We Are Here to Help

Get expert assistance with product selection and more.

Frequently Asked Questions

How long does it take to get my hardware once it's been ordered?

The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.

Do you ship merchandise outside the United States?

At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.

I have a hinge that I am trying to replace but I need help identifying it. Can you help?

Yes! Please click here to visit our Hinge Finder page.

Some of your hinges are sold by the each and some sell by the pair. What is the difference?

When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.

I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?

Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.

What is your return policy?

You can see our complete return policy here: HardwareSource Returns