Blum Tip-On Touch Latch for Self-Closing Doors

Description

Blum Tip-On cabinet touch latches open your cabinet door when you give the door a gentle push inward.
For use with Self-Closing European hinges only. If you have non self-closing hinges, see our SKU G10007 (also found under related products)
Works for both overlay and inset doors.
Works best for doors that are 12" or wider.
The Tip-On latch will push the door open wider than most other touch type latches (approximately 1.5"). This allows your hand to reach behind the door and pull it open.
To close the cabinet door, simply push the door closed. Your existing self-closing hinge will keep the door closed against the cabinet frame. This Blum Tip-On does not use magnetic action.
This product is sold in components. Please make sure to order one Tip-On and one Holder per door.

Holders and Installation

Made to be installed in frameless cabinets (cabinets without a face frame).
May be installed in face-frame cabinets by installing a block of wood behind the cabinet face-frame
The Holder is available in two types:
- In-Line Type (screw holes are not visible), Blum 956A.1201 / SKU 268818
- Wing Type (2 attachment screw holes are visible), Blum 956A.1501 / SKU 268820
Tip-On can be installed without a holder:
- Drill a 10mm hole in the cabinet side panel
- Install the "Tip On" in the 10mm hole
- See the documents found under Downloads for further details on this installation method
Screws are not included with either of the holders, but they are available to purchase separately. Order two #6 flat head screws (SKU 652360) per holder.

Warranty

Limited Warranty
Blum, Inc. (Blum) warrants its lift systems, hinges and/or drawer runners,
contained in this product, but not the product itself, against defects in material
and workmanship for as long as the original consumer purchaser owns the
products. This warranty is a warranty of replacement only. Blum specifically
does not warrant removal of the defective hardware nor installation of new
hardware. This warranty does not cover hardware which has been incorrectly
installed, exposed to excessive loads or otherwise used in any manner contrary
to its intended purpose. In the event the defective Blum hardware is obsolete or
has been discontinued, Blum reserves the right to replace the defective
hardware with a current offering. No guarantee of interchangeability is offered.

Other terms and conditions:
ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED AS SET FORTH ABOVE.

However, some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY STATE LAW AS
HEREBY LIMITED, THE FOREGOING EXPRESS LIMITED WARRANTY IS
EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES OF BLUM WITH
RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PROPS OR PARTS.
IN NO EVENT SHALL BLUM BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES RESULTING FROM THE USE, INSTALLATION, PERFORMANCE OR
FAILURE OF ITS HARDWARE.

However, some states do allow the exclusion of limitation of incidental or consequential damages, so the above exclusion may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Store Policies & Information

Shipping & Delivery
Returns
Contact Us

We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.

Page Code: G10008

CA Prop 65 Warning

Manufacturer

Blum
Finish Name

Gray
Material

Nylon
Mounting Hardware Included

No

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

A table comparing the facets of 4 products
Facet	Blum Tip-On Touch Latch for Free Swinging Doors View details	Magnetic Touch Latch View details	Mini Touch Latch for Cabinets View details	Long Throw Magnetic Touch Latch View details
Price
Price	From $0⁰⁶Each	$7²²Each	From $3¹⁵Each	$8⁰⁰Each
Description
Description	Blum Tip-On cabinet touch latches open your cabinet door when you give the door a gentle push inward. For use with free swinging...	Magnetic touch latch for cabinet doors. When you push on the cabinet door, the door pops out and is released from the magnetic...	This small touch latch installs on the underside of a cabinet shelf or wall. The strike plate installs on the back of the...	Magnetic touch latch with long throw for medium size doors. Latch is not visible when the door is closed. Magnetic force is 5.2...

Frequently Asked Questions

How long does it take to get my hardware once it's been ordered?

The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.

Do you ship merchandise outside the United States?

At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email info@hardwaresource.com with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.

I have a hinge that I am trying to replace but I need help identifying it. Can you help?

Yes! Please click here to visit our Hinge Finder page.

Some of your hinges are sold by the each and some sell by the pair. What is the difference?

When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.

I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?

Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.

What is your return policy?

You can see our complete return policy here: HardwareSource Returns