Blum  |  SKU: 652281

Edge Mount Plates for Blum Compact 33 Hinge

$399 Each
Overlay

Important note: This page is for the edge mount plate ONLY, and does not include the Compact 33 hinge or screws. To view the bundle which includes these products, please see related products section.

Fasteners Not Included

Description

  • These mounting plates are for use with the Blum Compact 33 hinge (our SKU 652276).
  • These mounting plates mount on the inside edge of the cabinet face frame.
  • When replacing worn out or broken Blum hinges. It is a good idea to replace all the hinges on your door at the same time.
  • There are nine different mounting plates. Each plate is for a different door overlay. To choose which plate is correct for your door, simply measure your door overlay and match it up to the overlay dimension listed. There is a link found under Resources that will help you measure your overlay.
  • Screws are not included.

Warranty

Limited Warranty
Blum, Inc. (Blum) warrants its lift systems, hinges and/or drawer runners,
contained in this product, but not the product itself, against defects in material
and workmanship for as long as the original consumer purchaser owns the
products. This warranty is a warranty of replacement only. Blum specifically
does not warrant removal of the defective hardware nor installation of new
hardware. This warranty does not cover hardware which has been incorrectly
installed, exposed to excessive loads or otherwise used in any manner contrary
to its intended purpose. In the event the defective Blum hardware is obsolete or
has been discontinued, Blum reserves the right to replace the defective
hardware with a current offering. No guarantee of interchangeability is offered.

Other terms and conditions:
ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED AS SET FORTH ABOVE.

However, some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY STATE LAW AS
HEREBY LIMITED, THE FOREGOING EXPRESS LIMITED WARRANTY IS
EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES OF BLUM WITH
RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PROPS OR PARTS.
IN NO EVENT SHALL BLUM BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES RESULTING FROM THE USE, INSTALLATION, PERFORMANCE OR
FAILURE OF ITS HARDWARE.

However, some states do allow the exclusion of limitation of incidental or consequential damages, so the above exclusion may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Store Policies & Information

Shipping & Delivery
Returns
Contact Us

We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.

Page Code: C10258

CA Prop 65 Warning

  • Manufacturer
    Blum
  • Model Number
    130.1100.24 (1/4")
    130.1100.23 (1/2")
    130.1100.26 (5/8")
    130.1100.22 (3/4")
    130.1110.02 (1")
    130.1120.02 (1-1/8")
    130.1130.02 (1-1/4")
    130.1140.02 (1-3/8")
    130.1150.02 (1-1/2")
    130.1160 (1-5/8")
  • Finish Name
    Nickel
  • Material
    Cast Metal
  • Plate Connection Type
    Screw-On
  • Mounting Hardware Included
    No
  • Mounting Hardware Type
    Two #6 Flat Head Screws (Our SKU 652360)

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Discover
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Rommel R.
Blum Compact 33 Hinge

Works very well. Discovered this hinge a few years back and have used only this ever since on my cabinets.

Related Products

European Hinge Screws
View details
Blum Compact 33 - Hinge Only
View details
Blum Compact 33 Hinge Bundle
View details
Face Mount Plate for Blum Compact 33 Hinge
View details
Blum Compact 33 Hinge Face Mount Bundle
View details
Price
Price
From $006 Each
$399 Each
From $822 Per Bundle
$399 Each
$822 Per Bundle
Description
DescriptionThese screws were specially made for European and Blum hinges. The #6 screw is for most European hinges and mounting plates. The #7... Installation: Mounts into a 35mm cup in the back of the cabinet door. Cup depth is 1/2". The bore distance (the distance from... Installation Mounts into a 35mm cup in the back of the cabinet door. Cup depth is 1/2". The bore distance (the distance from... These mounting plates are for use with the Blum Compact 33 hinge (our SKU 652276). This plate, like the name implies, mounts directly... Installation Mounts into a 35mm cup in the back of the cabinet door. Cup depth is 1/2". The bore distance (the distance from...

We Are Here to Help

Get expert assistance with product selection and more.

Contact Us Resources

Frequently Asked Questions

How long does it take to get my hardware once it's been ordered?

The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.

Do you ship merchandise outside the United States?

At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email info@hardwaresource.com with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.

I have a hinge that I am trying to replace but I need help identifying it. Can you help?

Yes! Please click here to visit our Hinge Finder page.

Some of your hinges are sold by the each and some sell by the pair. What is the difference?

When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.

I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?

Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.

What is your return policy?

You can see our complete return policy here: HardwareSource Returns
Back to top