My Cart: 0 item(s)
Overview
- Note: The sizes listed as the pintle diameter" (for example 3/4" pintle) are nominal dimensions, meaning they do not measure exactly that dimension. Use our nominal dimension to match up our straps with our bolts, etc. when you are ordering our products. If you order one of our products to match a pintle diameter of something that you already own, you do so at your own risk.
- The upright pintle is part of our pintle system of gate hinges.
- This product will work with a strap or screw eye.
- When ordering the other part of this hinge make sure that the pintle sizes match. For example, if you order an upright pintle with a 5/8" pintle your bolt must have a 5/8" pintle.
- Both the 1/2" and 5/8" upright pintle use two 3/8" lag screws per upright (not included).
- The weight ratings listed are for one hinge. For example, if the listed weight rating is 100 lbs and you use two hinges then your two hinges would be rated at 200 lbs.
1/2" Pintle:
- Upright pintle measures 4-1/4" long x 1-1/4" wide.
- 100 lb per hinge weight rating.
- Centerline of pintle is offset 7/8" from the backside of the pintle strap.
5/8" Pintle:
- Upright pintle measures 4-1/4" long x 1-1/4" wide.
- 150 lb per hinge weight rating.
- Centerline of pintle is offset 7/8" from the backside of the pintle strap.
Finish Name | Zinc |
Material | Steel |
Mounting Hardware Included | No |
Mounting Hardware Type | 3/8" Lag Screws |
California Residents | Prop 65 Warning |
You're reviewing
Upright Pintle for Pintle Hinge Systems
No Reviews Yet
2 Questions asked about Upright Pintle for Pintle Hinge Systems
Q
edward • 06/04/2018, 5:43:47 PM
the pintle in 5/8 diameter what is the length of the pintle
A
06/05/2018, 10:27:16 AM
About an inch and a half in length Edward.
Q
Vicki • 05/02/2021, 8:13:35 PM
What is the length of the 1/2 diameter pintle?
A
05/03/2021, 9:21:42 AM
Just about an inch and a half tall.
Estimate Shipping