- Electrified hinges allow a low voltage electric current to pass from the door frame leaf to the door side leaf of a standard architectural grade hinge. This allows control of various electric items ont the door such as electric locks, access control devices, and alarms.
- The wiring is completely concealed when the door is in the closed position.
- These are ball bearing hinges which are suitable for any door installation. They are especially desirable for doors with door closers installed.
UL Fire Rated
UL Rated for 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse (maximum pulsewidth: 400msec with 10sec minimum off time between pulses)
4 wires per hinge. Other wire configurations are available by special order. Contact us for more information.
When installing an electric hinge, it must be places as the middle hinge only.
All electrified hinges have fixed pins. The hinge pin is not removable.
A mortar guard is required for all applications which have a grout-filled door frame. This may be special ordered if necessary. Failure to install a mortar guard for this application will void any warranty on these hinges.
These hinges are sold by the each. You would normally order one electrified hinge and two (or more) non-electrified hinges per door.
|Finish Name||Satin Stainless Steel|
|Material||Stainless Steel (304)|
|Size (H x W)||4-1/2" x 4-1/2"|
|Mounting Hardware Included||Yes|
|Mounting Hardware Type||Matching Wood Screws|
|California Residents||Prop 65 Warning|