My Cart: 0 item(s)
Overview
- Weld-on barrel hinge is a lift off pivot hinge.
- Available in two finishes: zinc plated and black
- Features a zerk type grease fitting to keep the bearings lubricated.
- The hinge pin is fixed in one of the barrels.
500 lb Model Specifications:
- 4-1/2" H x 7/8" W.
- Barrel diameter is 1".
- Pin diameter is 5/8".
- For gates up to 8' wide.
- Leaves a 1-3/4" gap between the post and the gate after the hinge is installed.
800 lb Model Specifications:
- The Black Model is 7" H x 1-3/8" W, and the Galvanized Model is 7" H x 1-3/4" W.
- Barrel diameter is 1-1/2".
- Pin diameter is 3/4".
- For gates up to 15' wide.
- Leaves a 1-15/16" gap between the post and the gate after the hinge is installed.
Material | Steel |
Bearings | Ball Bearing |
California Residents | Prop 65 Warning |
You're reviewing
Round Body Barrel Weld-On Hinge
No Reviews Yet
2 Questions asked about Round Body Barrel Weld-On Hinge
Q
Steve Hodge • 08/04/2018, 4:05:36 PM
How thick is the weld plate on this hinge?
A
08/06/2018, 9:16:19 AM
Hi Steve! The welding plates for both sizes are around 5/16" thick.
Q
Jose Guerrero • 10/22/2018, 11:48:37 AM
what is the main difference between this part C10326 and 782000?
A
10/22/2018, 12:06:42 PM
---C10326 (500 lbs Weight Rating)---
4-1/2" H x 7/8" W.
Barrel diameter is 1".
Pin diameter is 5/8".
For gates up to 8' wide.
Leaves a 1-3/4" gap between the post and the gate after the hinge is installed.
---782000---
Overall size is 5" H x 1-3/4" W.
Barrel diameter is 1".
Pin diameter is 5/8".
Weldable plates measure 2" H x 1" W x 3/8" Thick.
Leaves a 1-3/4" gap between the post and gate when installed.
Estimate Shipping