My Cart: 0 item(s)
Overview
- These high quality hinges are machined from solid brass extrusions for exceptional precision and heft. The knuckles are fitted with extremely close tolerances.
- Made for door thicknesses ranging from 5/8" to 3/4".
- Leaf thickness is 3/32"
Fasteners
- Two sets of flat head phillips wood screws are included. One set are "pre-installation" screws. Installing these screws first facilitates the installation of the permanent screws, allowing them to be installed with less force to preserve the finish. The permanent screws are made from solid brass and finished to match the hinge. It is highly recommended that you do not install the permanent brass screws with a power screwdriver.
Details
- 2" H x 1-1/2" W
- Made for doors 5/8" to 3/4" thick
- #5 x 3/4" screws
- 2-1/2" H x 1-1/2" W
- Made for doors 5/8" to 3/4" thick
- #5 x 3/4" screws
- 2" H x 1-3/4" W
- Made for doors 7/8" to 1-1/8" thick
- 3/32" leaf thickness
- #6 x 3/4" screws
- 2-1/2" H x 1-3/4" W
- Made for doors 7/8" to 1-1/8" thick
- #6 x 3/4" screws
Material | Brass |
Material Thickness | 3/32" |
Removable Pin | No |
Decorative Tips | No |
Mounting Hardware Included | Yes |
Mounting Hardware Type | One set of pre-installation screws and one set of finished screws. |
California Residents | Prop 65 Warning |
You're reviewing
Precision Butt Hinge
No Reviews Yet
2 Questions asked about Precision Butt Hinge
Q
David Cheal • 02/06/2018, 11:48:42 AM
Are the precision butt hinges swaged or unswayed?
A
02/07/2018, 11:04:19 AM
Hello David, no, these hinges are not swaged.
Swaging � A slight offset of the hinge leaves at the barrel, which permits the leaves to come closer together.
Q
George Reiche • 02/21/2018, 9:56:00 AM
when closed, how much of a gap is there between the leafs?
A
02/22/2018, 11:46:16 AM
Hi George. There is a 1/16" gap by the barrel and the ends of the leaves touch.
Estimate Shipping