My Cart: 0 item(s)


Secure Checkout
*On Backorder* Gravity Cafe Pivot Set
    *On Backorder* Gravity Cafe Pivot Set
    Purchase *On Backorder* Gravity Cafe Pivot Set
    SKU #: C10625 Not Rated Yet

    *On Backorder* Gravity Cafe Pivot Set

    $38.77 Per Set
      HardwareSource - Checkmark On Backorder. See Below for details.  & Ships by the next day!


      Please Note: All options except for the Satin Brass Non-Hold Open (SKU 760004) are currently on backorder and are not due until September of 2022. If you would like to wait for these items you can place an order which we will put on hold. We will ship your held order as soon as possible. We apologize for the inconvenience.

      • For cafe and louvered doors.
      • Hinges are double acting, they swing 90 degrees in each direction.
      • The hold open model will hold the door open to about 90 degrees in either direction.
      • They work by gravity, the weight of the door acts to return the door to the center closed position.
      • Hinges are non-handed, they work on both right hand and left hand doors.
      • Maximum door width is 30".
      • For doors 7/8" to 1-5/8" thick.
      • Order one set per door.
      • PLEASE NOTE: The internal parts of this hinge are nylon. The nut on the bottom of this hinge should be "hand tightened" only. Do not tighten with a wrench.
      50 lbs Per Set
      Double Acting
      Matching Wood Screws
      Prop 65 Warning
      You're reviewing *On Backorder* Gravity Cafe Pivot Set
      Rate Product
      No Reviews Yet

      4 Questions asked about *On Backorder* Gravity Cafe Pivot Set

      Q randy wagner • 12/28/2017, 10:29:14 PM How much distance is required between bottom of door and floor, and between top of door and the "header"?
      A 12/29/2017, 2:14:09 PM You will need at least 1-13/16" up at the top and 2-1/2" at the bottom, although you could mortise the bottom piece into the door if you wanted, as shown on the manufacturer's specification drawing here:
      Q Pat Bashaw • 06/20/2018, 8:24:38 AM Can these hinges be used on full size interior doors?
      A 06/20/2018, 1:41:23 PM Hi Pat! This is generally used on half/saloon/louvered doors and not full size doors.
      Q Samuel W. LaDuca • 08/21/2018, 1:03:07 PM I need to modify a door with a curved top to accept the top hinge. Is there a mechanical diagram of the hinge available? Or, what are the dimensions of the top plate pieces?
      A 08/21/2018, 2:23:21 PM Hi Samuel! Here's a link to the template from Bommer's website for additional information.
      Q Elaine Hallett • 10/24/2020, 2:09:00 PM We want to use a hinge such as this on 2 pairs of 1 3/8" oak cafe doors. Our builder is wondering if he must round the corners of the doors to allow for the pivot action once mounted?
      A 10/26/2020, 8:10:46 AM Rounding the corners of your doors will not be necessary when using that Gravity Cafe Pivot Set.
      Estimate Shipping