My Cart: 0 item(s)

 

Secure Checkout
Blum Inserta Hinge for Frameless Overlay Cabinets - Bundle
    Blum Inserta Hinge for Frameless Overlay Cabinets - Bundle
    Purchase Blum Inserta Hinge for Frameless Overlay Cabinets - Bundle
    Blum Inserta Hinge for Frameless Overlay Cabinets - Bundle SKU #: B10089 Not Rated Yet

    Blum Inserta Hinge for Frameless Overlay Cabinets - Bundle

    $6.50 - $10.31 Per Bundle
    1
    $-.--
    1
    $-.--
    2
    $-.--
    Total: $0.00
    HardwareSource - Checkmark In Stock  & Ships by the next day!

    Overview

    • Blum Inserta straight arm hinge bundle for overlay doors on frameless cabinets.
    • Inserta hinges install on the door without using screws. On the hinge cup is a cover that acts as a lever. By pressing down on the lever, an anchor device is expanded which secures the hinge. This type of hinge is also known as a tool-free or toolless hinge.
    • This hinge uses two 8mm (5/16") holes where the wood screw holes would normally be to secure the hinge. See the document found under Downloads to view the Inserta screw hole pattern.
    • The hinge and mounting plate attach to each other by snapping on.

    What's Included

    • 1 x Blum Inserta Straight Arm Hinge
    • 1 x Frameless Mounting Plate
      • There are four possible mounting plates for frameless overlay cabinets. Each plate is a different height, which, in combination with the bore distance, changes the door overlay. It is important to match up your overlay to make sure your doors sit in the right position on your cabinet. To chose the correct mounting plate, use the "How to Select Your Mounting Plate" document found under Downloads.
    • 2 x #6 Wood Screws for the Mounting Plate

    Optional Accessories

    • Cover Plate for the Hinge Arm - Hides the screws on the hinge arm providing a cleaner appearance (SKU 268001)
    • Soft-Close Add-On Device - Eliminates slamming of the door and dampens the closing action (SKU 268230)

    Available for purchase separately:

    • Restriction clip. Limits angle of opening to 86 degrees (SKU 701113)
    • Blum Touch Latch for Self-Closing Doors (SKU 268822)
    • 35mm Forstner Bit, for new installations (SKU 204000)
    • Ecodrill, installation jig, for new installations (SKU 701000)
    Blum
    Hinge: 71T3590
    0mm Plate: 175H7100
    3mm Plate: 175H7130
    6mm Plate: 175H9160
    9mm Plate: 175H7190
    Nickel
    Steel
    Half Overlay
    Full Overlay
    No
    Yes
    Clip-On
    110 Degrees
    35
    45mm (1-3/4")
    Yes
    Two #6 x 5/8" wood screws for the mounting plate
    Prop 65 Warning
    You're reviewing Blum Inserta Hinge for Frameless Overlay Cabinets - Bundle
    Rate Product
    No Reviews Yet

    1 Question asked about Blum Inserta Hinge for Frameless Overlay Cabinets - Bundle

    Q Ron • 02/21/2018, 1:15:45 PM Blum full overlay inserta hinge. Question. Is the 9mm plate the correct size for the above mentioned hinge?
    A 02/22/2018, 12:09:47 PM I would recommend referencing the link below for how to choose the correct mounting plate as the mounting plate is determined by the overlay and the bore distance of your door. Feel free to give us a call if you have additional questions! 1-877-944-6437 https://www.hardwaresource.com/amfile/file/download/file_id/2420/product_id/10052/
    Estimate Shipping