Heavy Duty J Bolt Hinge
Couldn't load pickup availability
Description
Description
- This is a very heavy duty hinge specially made for heavy gates and doors.
- This heavy duty J bolt gate hinge will swing a full 180 degrees if installed without a stop.
- Hinge is made up of a mounting plate (flange) and J-Bolt arm.
- Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated.
Small:
- Weight Rating: 500 lb per pair
- Arm Size: 5/8" x 5"
- Plate size: 6" x 1" x 3/8"
- Screw hole center to center: 4-13/16"
- Minimum gap between post and edge of gate frame: 2-1/2"
- Maximum spread between two nuts on threaded bolt: 2-3/4"
- Thread size: 5/8 - 11
Large:
- Weight Rating: 900 lb per pair
- Arm size: 3/4" x 7"
- Plate size: 7" x 1-1/2" x 3/8"
- Screw hole center to center: 5-3/4"
- Minimum gap between post and edge of gate frame: 3-1/8"
- Maximum spread between two nuts on threaded bolt: 4-1/4"
- Thread Size: 3/4 - 10
Store Policies & Information
Store Policies & Information
Shipping & Delivery
Returns
Contact Us
We have been selling hardware and hinges for over 130 years. When you shop with us, you can count on prompt, personal customer service and reliable support.
Page Code: C10266
-
Finish Name
-
MaterialSteel
-
Heavy Duty Hinge TypeBolt-On
-
BearingsBall Bearing
-
Mounting Hardware Included
-
Mounting Hardware Type
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
| Facet | |||||
|---|---|---|---|---|---|
| Price | |||||
| Price |
From
$24626
Per Pair
Unit price
/
Unavailable
|
$11566
Each
Unit price
/
Unavailable
|
From
$3599
Per Pair
Unit price
/
Unavailable
|
From
$6318
Each
Unit price
/
Unavailable
|
From
$52100
Each
Unit price
/
Unavailable
|
| Description | |||||
| Description | A very heavy duty hinge designed to bolt-on to the post and to the gate frame. Overall bolt-on gate hinge height is 7-1/16".... | Bolt-on Gorilla Hinge. Hinge features a grease fitting for ease of lubrication. Made for installations where the post or frame is flush with... | These weld-on barrel hinges are a lift off pivot hinge. Features a round barrel body. Stainless steel hinge pin. Zerc type grease fitting.... | Double and triple weight steel weld-on prison hinges. Made for very heavy doors such as prison doors, lead-lined x-ray room doors, and other... | This surface mounted heavy duty weld on hinge is designed for doors with radial loads, doors with closers, and doors with large length... |
Frequently Asked Questions
How long does it take to get my hardware once it's been ordered?
How long does it take to get my hardware once it's been ordered?
The delivery time depends on how far you live from our San Diego warehouse. Generally, your order will reach you in 1 to 5 business days. Shipments do not move on weekends and holidays.
Do you ship merchandise outside the United States?
Do you ship merchandise outside the United States?
At this time, we only ship to addresses in the continental United States, Alaska, and Hawaii. For APO/FPO/DPO and Canadian orders, please email info@hardwaresource.com with a list of the SKU numbers and quantities you would like to purchase, along with your complete ship to address. Once we receive this information we will email you a shipping quote. Please note: Canadian shipments have a $50.00 minimum order.
I have a hinge that I am trying to replace but I need help identifying it. Can you help?
I have a hinge that I am trying to replace but I need help identifying it. Can you help?
Yes! Please click here to visit our Hinge Finder page.
Some of your hinges are sold by the each and some sell by the pair. What is the difference?
Some of your hinges are sold by the each and some sell by the pair. What is the difference?
When the unit of measure says “pair” that means two hinges. Usually you need one pair of hinges per door. When the unit of measure says “each” that means one hinge. You would usually order 2 “each” hinges per door.
I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?
I want to replace my hinges. How do I make sure the screw holes on the new hinge match the screw holes on the old hinge so I do not have to redrill the holes?
Unfortunately, hinge manufacturers have never standardized the location of their screw hole patterns. Every manufacturer puts their screw holes in a slightly different place. This means that when you replace hinges you will almost certainly have to do some filling and redrilling. The exception to this is Architectural door hinges which are built to a standardized template for each size hinge.
What is your return policy?
What is your return policy?
You can see our complete return policy here: HardwareSource Returns