Grass 110 Degree Hinge for Frameless Inset Cabinets (48 mm Screw Hole Spacing) - Bundle
- Full cranked hinge bundle for frameless cabinets with inset doors.
- These hinges can be used to replace old Mepla brand hinges which have a 48mm screw hole center to center spacing.
- You will no longer find new hinges with "Mepla" stamped on them, as Mepla and Grass merged in 2007 to simply become Grass.
- Please see the "Reveal Information" document below to verify if this bundle will work for your application.
- Four different adjustments
- Depth adjustment (+3mm and -1mm)
- Side adjustment / Overlay (+1mm and -3mm)
- Height adjustment (+2mm and -2mm)
- Click on link below for information on how to adjust
- Hinge cup size is 35mm (1-3/8"). Cup depth is 11mm (7/16").
- Door opening angle is 110 degrees
- Works for bore distances from 3mm (1/8") to 7mm (9/32")
- Works for door thicknesses from 16mm (5/8") to 22mm (7/8")
- 1 x Grass "Nexis 110" Full Cranked Hinge with 48mm center to center spacing
- 1 x 4mm Frameless Mounting Plate
- 2 x #6 Screws for the Mounting Plate
- 2 x Plastic Dowels and Dowels Screws (pre-attached to the hinge) - Dowels are typically used on manufactured wood or MDF doors because they hold better than wood screws. If you have a solid wood door, discard the plastic dowels and use either the dowel screws (blunt and slightly shorter) that come with the hinge or purchase #6 flat head wood screws (two per hinge, our SKU 652360).
- Soft-Close Add-On Device - Eliminates slamming of the door and dampens the closing action.
Available for purchase separately:
- Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
- #6 flat head wood screws for the hinge side, can be used in place of the included plastic dowels and dowel screws (SKU 652360)
- 35mm Forstner Bit, for new installations (SKU 204000)
|Model #||Hinge: 146.304.56.1515
4mm Plate: 315.393.55.0415
|Cabinet Door Type||Flush Inset|
|Plate Connection Type||Clip-On|
|Opening Angle||110 Degrees|
|Screw Hole Spacing||48mm (1-7/8")|
|Mounting Hardware Included||Yes|
|Mounting Hardware Type||Two plastic dowels and dowel screws for the hinge cup and two #6 screws for the mounting plate.|