My Cart: 0 item(s)
Overview
- European style Blum glass door hinges for inset, overlay, and twin overlay glass doors.
- Feature a 94 degree opening angle and 3 dimensional adjustment.
- This hinge system requires that the glass door have a 26mm hole bored for each hinge used.
- They work with glass thicknesses of 4.5mm to 7mm (slightly under 3/16 to slightly over 1/4 inch).
- The hinge system is made up of 4 items: the hinge, the cover cap, the mounting plate, and the wood screws for the mounting plate.
- The hinge comes in three types: Straight Arm for overlay doors, Half Cranked for twin overlay doors (also known as back to back doors), and Full Cranked for inset doors.
- There are four options for mounting plates. Please review the documents under the Downloads section for instructions on how to determine your mounting plate size.
- The cover caps (required to hold glass door to hinge system) are available in two finishes (black and chrome), and two types (round and D-shaped). Screws to hold cover cap to hinge are included.
- All parts of the glass cabinet door hinge and cover cap that touch the glass are a plastic material.
Manufacturer | Blum |
Model Number | Straight Arm Hinge: 75T4100 1/2 Crank Hinge: 75T4200 Full Crank Hinge: 75T4300 0mm Plate: 175H7100 3mm Plate: 175H7130 6mm Plate: 175H9160 9mm Plate: 175H7190 |
Finish Name | Nickel |
Material | Steel |
Cabinet Door Type |
Flush Inset Half Overlay Full Overlay |
Soft Closing | No |
Self Closing | Yes |
Plate Connection Type | Clip-On |
Opening Angle | 94 Degrees |
Cup Diameter | 26 |
Mounting Hardware Included | Yes |
Mounting Hardware Type | Two flat head wood screws |
California Residents | Prop 65 Warning |
You're reviewing
Blum Glass Door Hinge
No Reviews Yet
No Questions Asked Yet. Use the form below to ask one.
Estimate Shipping