Blum Inserta Hinge for Face Frame Inset Cabinets - Bundle

From $6.38

To $10.86

Per Bundle

Blum Inserta Hinge for Face Frame Inset Cabinets - Bundle
Customize: Use the options below to configure your product bundle
Blum Inserta 110 Degree Hinge, Half Crank   + $2.99
Blum Face Frame Inset Door Adapter Plate   + $3.39

* Required Fields

In stock

Ships by the next day!
Your Customization
Blum Inserta Hinge for Face Frame Inset Cabinets - Bundle

In stock

$6.38

SKU
B10091
Summary

    Overview

    • Blum Inserta half-cranked hinge bundle for full inset doors on face frame cabinets.
    • Inserta hinges install on the door without using screws. On the hinge cup is a cover that acts as a lever. By pressing down on the lever, an anchor device is expanded which secures the hinge. This type of hinge is also known as a tool-free or toolless hinge.
    • This hinge uses two 8mm (5/16") holes where the wood screw holes would normally be to secure the hinge. Click on the link below to view the Inserta screw hole pattern.
    • The hinge and mounting plate attach to each other by snapping on.
    • To drill the angled holes for the adapter plate the purchase of the Blum Platemate is highly recommended although not absolutely necessary. The Blum Platemate clamps on the edge of the face frame and allows accurate drilling of the adapter plate screw holes. The Platemate includes a drill bit and drill bit extension for a #8 drill bit (2.5mm bit).The Blum Platemate (SKU 268227) can be purchased from us separately.

    What's Included

    • 1 x Blum Inserta Full-Cranked Hinge
    • 1 x Face Frame Adapter Mounting Mounting Plate
    • Important Note: Two #8 pan head screws are required for the mounting plate but are NOT included in this bundle. This is because at the time we only sell these screws in packs of 5. To purchase these screws, please see the related products below (SKU 135410). 

    Optional Accessories

    • Cover Plate for the Hinge Arm - Hides the screws on the hinge arm providing a cleaner appearance (SKU 268002)
    • Soft-Close Add-On Device - Eliminates slamming of the door and dampens the closing action (SKU 268230)

    Available for purchase separately:

    • Pack of five #8 x 3/4" pan head screws. Two screws are required for each adapter plate purchased.
    • Blum Platemate. To drill the angled holes for the adapter plate the purchase of the Blum Platemate is highly recommended although not absolutely necessary. The Blum Platemate clamps on the edge of the face frame and allows accurate drilling of the adapter plate screw holes. PLEASE NOTE: THE BLUM PLATEMATE IS A NON-RETURNABLE ITEM.
    • Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
    • Restriction clip. Limits angle of opening to 86 degrees (SKU 701113)
    • Blum Touch Latch for Self-Closing Doors (SKU 268822)
    • 35mm Forstner Bit, for new installations (SKU 204000)
    • Ecodrill, installation jig, for new installations (SKU 701000)

    Features

    Specs

    More Information
    Manufacturer Blum
    Model # Hinge: 71T3690
    Mounting Plate: 175H5030.21
    Finish Name Nickel
    Material Steel
    Cabinet Door Type Flush Inset
    Cabinet Type Face Frame
    Soft Closing No
    Self-Closing Yes
    Plate Connection Type Clip-On
    Opening Angle 110 Degrees
    Cup Diameter 35
    Screw Hole Spacing 45mm (1-3/4")
    Mounting Hardware Included No
    Mounting Hardware Type Two #8 x 3/4" pan head wood screws for the mounting plate
    Write Your Own Review
    You're reviewing:Blum Inserta Hinge for Face Frame Inset Cabinets - Bundle
    Your Rating