My Cart: 0 item(s)
Overview
- Blum Inserta 170 degree hinge bundle for overlay doors on frameless cabinets.
- Inserta hinges install on the door without using screws. On the hinge cup is a cover that acts as a lever. By pressing down on the lever, an anchor device is expanded which secures the hinge. This type of hinge is also known as a tool-free or toolless hinge.
- This hinge uses two 8mm (5/16") holes where the wood screw holes would normally be to secure the hinge. See the document found under Downloads to view the Inserta screw hole pattern.
- The hinge and mounting plate attach to each other by snapping on.
What's Included
- 1 Blum Inserta 170 Degree Hinge
- 1 Blum Frameless Mounting Plate
- There are four possible mounting plates for frameless overlay cabinets. Each plate is a different height, which, in combination with the bore distance, changes the door overlay. It is important to match up your overlay to make sure your doors sit in the right position on your cabinet. To chose the correct mounting plate, use the "How to Select Your Mounting Plate" document found under Downloads.
- Two #6 screws for the mounting plate
Optional Accessories
- Cover Plate for the Hinge Arm - Hides the screws on the hinge arm providing a cleaner appearance (SKU 268003)
- Soft-Close Add-On Device - Eliminates slamming of the door and dampens the closing action (SKU 268234)
Available for purchase separately:
- Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
- Restriction clip. Limits angle of opening to 130 degrees (SKU 652033)
- Blum Touch Latch for Self-Closing Doors (SKU 268822)
- 35mm Forstner Bit, for new installations (SKU 204000)
- Ecodrill, installation jig, for new installations (SKU 701000)
| Manufacturer | Blum |
| Model Number | Hinge: 71T6540 0mm Plate: 175H7100 3mm Plate: 175H7130 6mm Plate: 175H9160 9mm Plate: 175H7190 |
| Finish Name | Nickel |
| Material | Steel |
| Cabinet Door Type |
Half Overlay Full Overlay |
| Soft Closing | No |
| Self Closing | Yes |
| Plate Connection Type | Clip-On |
| Opening Angle | 170 Degrees |
| Cup Diameter | 35 |
| Screw Hole Spacing | 45mm (1-3/4") |
| Mounting Hardware Included | Yes |
| Mounting Hardware Type | Two #6 x 5/8" wood screws for the mounting plate |
| California Residents | Prop 65 Warning |
You're reviewing
Blum Inserta 170 Degree Hinge for Frameless Overlay Cabinets - Bundle
No Reviews Yet
No Questions Asked Yet. Use the form below to ask one.
Estimate Shipping
