Blum 120 Degree Hinge for Face Frame Inset Cabinets - Bundle

Overview

• Please reference the minimum reveal information document under Downloads to verify if this bundle will work for you.
• Blum's half cranked clip top hinge for face frame inset cabinets.

What's Included

• 1 Blum Half Cranked Hinge (Blum #71T5650)
• 1 Blum Face Frame Adapter Mounting Plate
• Two #6 x 5/8" screws for the hinge
• Important Note: Two #8 pan head screws are required for the mounting plate but are not included in this bundle. This is because at the time we only sell these screws in packs of 5. To purchase these screws, please see the related products (SKU 135410).

Optional Accessories

• Cover Plate for Arm Part of Hinge - Hides the screws on the hinge arm providing a cleaner appearance
• Cover Plate for Cup Side of Hinge - Hides the screws on the cup side providing a cleaner appearance
• Soft-Close Add-On Device - Eliminates slamming of the door and dampens the closing action

Available for purchase separately:

• Pack of five #8 x 3/4" pan head screws. Two screws are required for each adapter plate purchased.
• Blum Platemate. To drill the angled holes for the adapter plate the purchase of the Blum Platemate is highly recommended although not absolutely necessary. The Blum Platemate clamps on the edge of the face frame and allows accurate drilling of the adapter plate screw holes. PLEASE NOTE: THE BLUM PLATEMATE IS A NON-RETURNABLE ITEM.
• Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
• Blum Touch Latch for Self-Closing Doors (SKU 268822)
• 35mm Forstner Bit, for new installations (SKU 204000)
• Ecodrill, installation jig, for new installations (SKU 701000)