My Cart: 0 item(s)


Secure Checkout
#3 Youngdale Hinge
    #3 Youngdale Hinge
    Purchase #3 Youngdale Hinge
    SKU #: C10146 Not Rated Yet

    #3 Youngdale Hinge

    $5.19 Per Pair
      HardwareSource - Checkmark In Stock  & Ships by the next day!


      New Installations

      • Youngdale hinges are an excellent alternative to European style hinges. New installations are much easier than European style hinges. A table saw and some moderate woodworking skills are all that is required.
      • The hinge is completely hidden in frontal view. A saw cut is required in the edge of the cabinet door which is only visible from the side view.
      • Youngdale hinges are self-closing and will work for both face-frame and frameless hinges.
      • With the exception of the #65 hinge, Youngdale hinges are not handed. The same hinge will work on either a left or right hand door.
      • The door opening angle and other functionality varies with the door thickness.

      Hinge Types:

      • Style #3 is for a 1/4" overlay door with a 1/2" minimum door thickness.
      • Style #5 is for a 1/4" overlay door with a 5/8" minimum door thickness.
      • Style #65 is for a 1/2" overlay door with a 1/2" minimum door thickness.
      • Style #6 is for a 1/2" overlay door with a 5/8" minimum door thickness.
      • Style #8 is for a 5/8" overlay door with a 3/4" minimum door thickness.
      • Style #4 is for a 3/8" partial inset door (lipped door)

      If you are replacing existing Youngdale hinges, your hinge style will be stamped on the body of your hinge.

      Youngdale #7 Hinges
      Youngdale #7 hinges have not been produced in over 20 years and are no longer available. You can replace Youngdale #7 hinges with Youngdale #6 hinges, the only difference will be a slightly less opening angle.

      Youngdale #65SR Hinges
      Youngdale #65SR hinges were made specifically for Schrock brand cabinets and are no longer available. You can substitute #65SR hinges with our #65 hinges, however, the screw holes will need to be redrilled. To do this, drill out the old holes so a hardwood dowel can be inserted into them and flush cut. This will allow you to redrill the new screw holes. It is the only solution to this problem.

      Please note these hinges are sold by the pair (two complete hinges).

      Prop 65 Warning
      You're reviewing #3 Youngdale Hinge
      Rate Product
      No Reviews Yet

      4 Questions asked about #3 Youngdale Hinge

      Q Paul. Yellets • 12/12/2017, 12:38:12 PM I need #4 youngdale bright brass! I did not see that hinge! Is it available to be purchased? Thanks. Paul
      A 12/13/2017, 2:29:22 PM Youngdale no longer makes hinges in bright brass. Unfortunately we don't have any more inventory of the #4 style.
      Q Jami Bean • 01/02/2018, 10:24:54 AM Is there a Soft Close hinge to replace a #3 Youngdale hinge?
      A 01/02/2018, 10:36:05 AM There are no soft-close Youngdale-type hinges.
      Q Margaret Busby • 07/11/2018, 11:42:33 AM What is meant by 1/4" etc. overlay door. My old hinge has the number 6R stamped on it but it was made in Taiwan so may not equate with your hinge numbers.
      A 07/11/2018, 12:47:11 PM Hi Margaret! The most important measurements for Youngdale hinges would be the Overlay and the door thickness. if your hinges have "Youngdale Vista, CA" stamped on it then it is that brand. Here's a link to show you how to measure your Overlay.
      Q Jim • 05/10/2021, 4:58:50 PM Does this hinge come with screws?
      A 05/11/2021, 9:10:03 AM Yes, matching wood screws are included.
      Estimate Shipping