Categories
-
DOOR HINGES
-
CABINET HINGES
- Semi Concealed Cabinet Hi...
- Surface Mounted Cabinet H...
- Demountable Hinges
- Youngdale Hinges
- Overlay Hinges
- Partial Inset Hinges
- European Hinges
- Blum Hinges
- Pivot Hinges for Cabinets
- Pivot Door Slides
- Flipper Door Slides
- Entertainment Center Cabi...
- Ball Tipped Cabinet Hinges
- Tray Hinges
- Other Cabinet Hardware
-
FURNITURE HINGES
-
GATE HINGES AND HARDWARE
-
SPECIALTY HINGES
- Small Butt Hinges
- Soss Hinges
- Other Invisible Hinges
- Piano Hinges
- Continuous Hinges
- Strap Hinge
- Dummy Strap Hinges
- No Mortise Hinges
- Bi-Fold Door Hinge
- Tee Hinges
- Chest Hinges
- Box Hinges - Lid Supports
- Garage Door Hinges
- Folding Screen Hinges
- Weld-on Hinges
- Welding Hinges
- Refrigerator Hinges
- Ice Box Hinges
- Shower Door Hinges
-
SHUTTER & WINDOW
-
STAINLESS STEEL HINGES & HARDWARE
Soss Hinges & Other Invisible Hinges
Refine by Category:
- For 11/16" minimum door thickness
- hinge is completely concealed when door is closed
- opens 180 degrees
- hinge shown in photo is SKU 900016
- steel base material
- screws included
Finishes:
- Satin Brass
- Satin Chrome
- Black Epoxy
- For 1/2" and 3/4" minimum door thickness
- hinge is completely concealed when door is closed
- opens 180 degrees
- hinge shown in photo is SKU 900020
- made from high strength plated steel and heavy duty zinc alloy castings
- matching screws are included
Finishes:
- Satin Brass
- Satin Chrome
- Black Epoxy
- Solid stainless steel hinges made by Soss. Suitable for marine environments, yachts, etc.
- For doors with a minimum door thickness of 1/2" or 3/4".
- Hinge is completely concealed when door is closed.
- Hinge opens a maximum of 180 degrees.
- Made from solid stainless steel.
- Matching stainless steel screws are included.
- Hinge shown in photo shows the polished stainless finish.
- PLEASE NOTE; Soss stainless steel hinges are sold by the each. You would normally need to order 2 or 3 hinges per door.
Finishes:
- Satin Stainless Steel
- Polished Stainless Steel
- For 1", 1-1/8" and 1-3/8" minimum door thickness.
- Hinge is completely concealed when door is closed.
- Hinge opens a maximum of 180 degrees.
- Made from high strength plated steel and heavy duty zinc alloy castings.
- Hinge shown in photo is SKU 900024.
- Matching screws are included.
- PLEASE NOTE: THESE HINGES ARE NOW SOLD BY THE EACH (FORMERLY SOLD BY THE PAIR). FOR A TYPICAL DOOR YOU WOULD NORMALLY ORDER 2 OR 3 EACH.
Finishes:
- Satin Brass
- Satin Chrome
- Black Epoxy
- Solid stainless steel hinges made by Soss. Suitable for marine environments, yachts, etc.
- For doors with a minimum door thickness of 1-3/8".
- Hinge is completely concealed when door is closed.
- Hinge opens a maximum of 180 degrees.
- Made from solid stainless steel.
- Matching stainless steel screws are included.
- Hinge shown in photo shows the satin stainless finish.
- The Soss #416SS hinges were previously numbered Soss #216SS.
- PLEASE NOTE; Soss stainless steel hinges are sold by the each. You would normally need to order 2 or 3 hinges per door.
Finishes:
- Satin Stainless Steel
- Polished Stainless Steel
- For 1-3/4" and 2" minimum door thickness.
- Hinge is completely concealed when door is closed.
- Hinge opens a maximum of 180 degrees.
- Made form high strength plated steel and heavy duty zinc alloy castings.
- For full size doors.
- Reinforced nylon at wear points for long life.
- Matching screws are included.
- Hinge shown in photo is SKU 900028.
- PLEASE NOTE: THESE HINGES ARE NOW SOLD BY THE EACH (FORMERLY SOLD BY THE PAIR). FOR A TYPICAL DOOR YOU WOULD NORMALLY ORDER 2 OR 3 EACH.
Finishes:
- Satin Brass
- Satin Chrome
- Black Epoxy
- The Soss invisible spring closer gives you a spring closer that is totally invisible from either side of the door when the door is closed. This closer is meant to be used with regular Soss hinges of the same size (Use them in combination with regular Soss #216, #218 or #220 hinges).
- Closure rate is adjustable
- The spring can be installed either inside the door or inside the door jamb.
- Allow one spring closer for every 75lbs of door weight
- These Soss invisible closer hinges match the Soss regular invisible hinges (Soss #216, 218 and 220)
- Made of high strength plated steel and heavy duty zinc alloy castings.
- Click on link below for dimension chart and sizing chart for door thicknesses.
Finishes:
- Satin Brass
- Satin Chrome
- Black Epoxy
- A Soss router guide template makes the job easier and faster and will give you a perfect installation every time.
- A Soss router guide template allows you to cut both the shallow and the deep mortise required for installation.
- There is a Soss router guide template for each size Soss hinge.
- The template is held on the door and jamb with nails and removable guide pins locate the deep mortise.
- Made from hardwood
- You must have a Porter-Cable router guide bushing (Porter-Cable #42024) and locknut (Porter-Cable #42237) to use the Soss Router Guides. Order our SKU #900110 for the guide bushing and locknut. Router bit not included.
- This guide bushing and locknut is necessary to use any of our Soss Router Guides
- It is the same as a Porter Cable #42024 bushing and a Porter Cable #42237 locknut.
- Fits most routers
- Guide bushing I.D. measures 21/32"; O.D. measures 3/4"; distance past base is 9/16".
Finishes:
- Zinc Chromate Plated
- The Soss Multiple Router Guide System allows you to set up a rounter guide for an entire door.
- It is especially efficient if you have a number of doors to mortise that will be using the same size hinge
- Includes router guides, aluminum channel rails, connecting angle rail, guide pins, locator pins and fasteners and a 4-page instruction booklet
- You must have a Porter-Cable router guide bushing (Porter-Cable #42024) and locknut (Porter-Cable #42237) to use the Soss Router Guides. Order our SKU #900110 for the guide bushing and locknut. Router bit not included.
- Router template guides are made from hardwood
- The Soss Multiple Router Guide System is available in 3 hinge sizes (Soss 216, 218, and 220) and it is available in either the 3 hinge model or the 4 hinge model. The 3 hinge model is shown in photo to left.
- Hinge is completely concealed when door is closed
- Maximum door opening is 180 degrees
- Click on specification link below for detailed dimensions
- Hinge is sold by the each. Usually two each are needed per door.
- Made entirely of type 304 stainless steel
- Flat head stainless wood screws are included
- Maximum door size is 17-23/32" wide by 27-9/16" tall with a 7/8" door thickness. Maximum door weight for a pair of hinges is 5.72 lbs.
Finishes:
- Satin stainless steel
- Light duty nylon hinge with steel linkages
- Affordable price
- Measures 1-1/4" by 1-1/4" by 15/32" thick (with hinge in closed position)
- Incorporated set screws expand wedge locks to secure in wood. No wood screws are necessary.
- For wood up to 13/16" thick
- Make mortise with a 12mm drill bit
- Sold by the each. Order 2 hinges per door.
- Black nylon
Finishes:
- Large (approx 3.25" tall) concealed hinge.
- Body is made of white polyamide, hinge face and linkage is made from Type 304 stainless steel.
- Excellent hinge for marine applications.
- Load capacity is 66lbs per pair of hinges and 110lbs for 3 hinges.
- Maximum door opening of 180 degrees.
- Uses 4 each #10 flat head screws per hinge (Not included but offered for purchase during checkout).
Finishes:
- White Polyamide with Stainless Face
- Large (approx 3.5" tall) concealed hinge.
- Body is made of brown polyamide, hinge face and linkage is made from Type 304 stainless steel.
- Excellent hinge for marine applications.
- Load capacity is 88lbs per pair of hinges and 132lbs for 3 hinges.
- Maximum door opening of 180 degrees.
- Uses 4 each #12 flat head screws per hinge (Not included but offered for purchase during checkout).
Finishes:
- Brown Polyamide with Stainless Face
- for right or left hand installations
- completely invisible from either side of the door when closed
- easy installation
- for light applications
- adjustable tensioning screw
- accurate drilling essential
- solid brass base material with brass links
- no screws needed
- PLEASE NOTE: these hinges are not recommended for vertical or load bearing applications. The manufacturer does not provide weight ratings on this product.
- Self-closing, concealed hinge.
- Made for cabinets whose doors open back-to-back. Both doors will open without interfering with each other.
- Made for use on frameless cabinets
- Opening angle is 90 degrees.
- Approximate size of hinge is 1-3/4" x 4-1/8".
- No hole boring or mounting plates required.
- For full-overlay, half-overlay, or inset doors.
- When open, the door is offset 1/2".
- Maximum full overlay is 25/32".
- When used on inset doors the maximum door thickness is 3/4".
- Steel base material.
- Uses 6 each #6 pan head screws per hinge(not included but offered for purchase during checkout).
Finishes:
- Nickel plated
- Opens to 90 degrees.
- Made for use with frameless cabinets.
- Approximate size of hinge is 1-7/8" x 4-1/2".
- For full-overlay, half-overlay, or inset doors.
- When open, inside of door is flush cabinet style.
- No hole boring or mounting plates required.
- Maximum full overlay is 25/32".
- For door thicknesses 5/8" to 3/4" and side panel thicknesses of 5/8" to 7/8"
- Available in free swinging or self closing models.
- Steel base material
- Uses 8 each #6 pan head screws (not included. Screws are offered for purchase during checkout)
- For hinges with bronze finish, order 8 each #286-252 per hinge (#6 x 5/8" pan head bronze screws).
Finishes:
- Bronze plated
- Nickel plated
- This heavy duty hinge allows smooth, silent, sag-free opening to 175 degrees
- Hinge surface mounts to the inside of your frameless cabinet. Small screw holes are the only holes you need to drill.
- Hinge works on 5 different applications: full overlay doors, half-overlay doors, full inset doors, and mitered corner doors (click on link below for illustrations) It also works on 3/8" inset doors with a 3/8" lip (no illustration available)
- For normal use the hinge can be used on door thicknesses up to 1"
- If used on "back-to-back" cabinets a maximum of 13/16" is recommended
- Hardened steel construction (.082 gauge steel)
- Features spring closing mechanism so cabinet latches are not necessary
- Cabinet must have at least a 4-1/8" depth. Hinge measures approximately 4" long by 1-5/8" by 2".
- Screws are not included but are offered for purchase during checkout. Each hinge uses 10 each #6 pan head screws.
Finishes:
- Nickel Plated
- Flap opens 90 degrees flush with inside shelf
- Fits flush in door & shelf surfaces, concealed from exterior
- Click on link below for more install information
- Uses #4 Flat head screws (not included)
- Hinge is 3-way adjustable and detachable
Finishes:
- Dark Bronze plated
- Nickel plated
- Allows panel to fold down and hold at 90 degrees
- Fits a 35mm (1-3/8") hole
- Hinge is detachable and adjustable
- Zinc die cast material
- Hinge measures 2-3/16" by 1-1/2", measured at its widest points.
- Hinge thickness is 15/32"
- Screws are not included
Finishes:
- Dark Bronze
- Nickel
- flap opens 90 degrees, flush with inside shelf
- fits flush in door & shelf surfaces, concealed from exterior
- 30mm Forstner or flat boring bit needed to install
- for 3/4" thick doors
- linkage is brass and steel
- #4 x 5/8" oval head wood screws are included
Finishes:
- White nylon
- Allows drop panel to fold down and hold at 90 degrees
- Fits a 35mm (1-3/8") hole
- Hinge measures 2-9/16" by 1-9/16", measured at its widest points.
- Hinge thickness is 1/2"
- Hinge is detachable and adjustable
- Zinc die cast material
- Screws are not included
Finishes:
- Dark bronze
- Satin Brass
- Nickel
- Flap opens 90 degree flush with inside shelf
- Fits flush in door & shelf surfaces, concealed from exterior
- Click on link below for more install information
- Uses #3 Flat head screws (not included)
- Hinge is 3-way adjustable and detachable
Finishes:
- White plastic and Chrome plated