• The advantage of a "no-mortise" hinge is that because the one leaf is set inside the other installation of the hinge leaves only a small gap between the door and frame .
• For connecting doors, panels, or screens.
• No-mortise hinges are a good choice for bi-fold doors.
• This hinge will leave only a 1/16" gap between the door and frame or in the case of bi-fold doors between the two doors.
• Made from steel base material.
• Uses #5 x 3/4" flat head screws which are included.

Finishes:

• Satin brass

• No-mortise (also known as a non-mortise hinge) hinge, great for use on interior shutters, bi-fold doors, cabinets or screens.
• Installs like a full mortise butt hinge however no mortising (cutting of door edge or frame edge) is required. Leaves only a 1/16" gap between door and frame.
• Hinge measures 3" tall by 1-1/4" wide.
• Fits door thicknesses from 7/8" to 1-1/4".
• Made from steel base material and available in 6 different finishes.
• Hinge pin is removable.
• Uses #6 flat head screws. Screws are not included but are offered for purchase during checkout.

Finishes:

• Brass Plated
• White
• Antique Brass
• Brushed Chrome
• Bright Nickel
• Polished Chrome

• Hinge requires no mortising to install.
• Leaves only a 1/16" gap.
• Tight pins with decorative finial tip.
• Steel base material.
• Joint length means distance along hinge pin. Does not include finials.
• SKU 816561 includes screws.
• Use flat head screws (not included but offered for purchase during checkout).
• For the #4 screw order SKU 286253.
• For the #5 screw order SKU 286254.

Finishes:

• Light Antique Brass
• Bronze plated

• Steel base material.
• 2" tall (not including tips).
• 7/8" wide.
• Fits door thicknesses of 5/8" to 3/4".
• Screws are included.
• requires no mortising to install and leaves only a 1/16" gap.

Finishes:

• Bronze plated

• No mortise style hinge. Hinge installs as a normal full mortise butt hinge but no mortising is required.
• Leaves only a 1/8" gap after installation.
• Top leaf rides on a ball bearing located on the top of the hinge pin.
• Hinge is not handed, may be used on left or right opening doors.
• Hinge shown in photo is shown in the "door open" position.
• Hinge is a lift off hinge, door may be lifted off after hinge is installed without removing any screws.
• Made from solid type 304 stainless steel.
• Available in two sizes, a 4" high hinge and a 5" high hinge.
• The 4" hinge leaf is 1-5/8" wide not including the hinge barrel. The hinge barrel diameter is 5/8".
• The 5" hinge leaf is 1-3/8" wide not including the hinge barrel. The hinge barrel diameter is 3/4".
• Weight ratings listed below are for a pair of hinges.
• Stainless steel flat head screws are included.

Finishes:

• Satin Stainless Steel

• No Mortise hinge for bi-fold doors, interior shutters or other doors where a no mortise hinge is desired.
• Available in two sizes; 3" tall or 2" tall.
• Leaves only a 1/16" gap between the door and frame or between doors.
• Steel base material.
• Wood screws are included.
• PLEASE NOTE; the screw hole pattern shown in the photo does not represent the actual screw hole pattern of the hinge.
• Sold by the pair. A pair means two hinges. The photo to the left is one hinge or 1/2 pair.

Finishes:

• Satin Brass

• Beautiful no-mortise style hinge is made from solid brass base material.
• Hinge is 2-1/2" tall by 15/16" wide.
• Made to fit a 3/4" thick door.
• Decorative ball tips.
• Screws are included.

Finishes:

• Antique brass

• Steel base material.
• 3-1/2" tall by 1-1/4" wide (in closed position).
• Fast pin.
• Nylon spacers.
• Screws are included.
• Fits door thickness of 1" to 1-1/4".

Finishes:

• Satin Chrome plated

• Beautiful No-Mortise style hinge.
• Hinge is 2-1/2" tall (not including tips).
• Tip-to-tip measurement is 3-1/8".
• Width of hinge is 1".
• Matching wood screws are included.
• Requires no mortising to install and leaves only a 1/16" gap.
• Made to fit a door thickness of 3/4".
• When ordering, please notice the material of the hinge.

Finishes:

• Satin Nickel
• Oil Rubbed Bronze
• Polished Brass

• Made to fit a 3/4" to 7/8" door.
• Requires no mortising to install and leaves only a 1/16" gap.
• 3-1/8" tip-to-tip measurement.
• 2-1/2" tall not including tips.
• 1" wide.
• Made from steel or brass base material. Please note material listed with SKU number before ordering.
• Matching wood screws are included.

Finishes:

• Antique Brass
• Polished Nickel
• Weathered Copper
• Antique Nickel

• For full inset doors where doors are 3/4" in thickness
• Hinge leaf wraps around back of door for extra attachment strength
• "No-mortise" type hinge does not require mortising the door or frame
• These hinges work well for entertainment center doors with "articulated" doors
• Door gap as small as 1/16" because of no-mortise style
• Non-self closing
• Hinge is 2-1/2" tall. From tip to tip it is 2-3/4"
• Base material is steel (except on Solid Brass model)
• Screw holes are slotted for easy vertical and horizontal adjustment
• Screws are included

Finishes:

• Satin nickel
• Dark Antique English
• Burnished Brass
• Antique English
• Wrought Iron
• Polished Brass
• Solid Brass
• Oil Rubbed Bronze

• Beautiful solid brass hinges require no mortising to install.
• Tight pins with a decorative finial tip (steeple tip).
• Installs with only a 1/16" gap between door and door frame.
• Uses #5 x 5/8 inch flat head screws. (Screws are included).
• Made from solid brass base material.
• Hinge is made for 3/4" thick door.
• Tip-to-tip measurement is 2-7/8".
• The large leaf measures 3/4" by 2" (not including the barrel).
• The barrel measures 1/4".
• Available in 13 different finishes. Click on link to view finish chart.
• PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.

Finishes:

• Satin Brass
• Gloss Oil Rubbed Bronze
• Black Nickel
• Flat Black
• Oil Rubbed Bronze
• Antique Copper
• Antique Nickel
• Polished Brass
• Polished Chrome
• Satin Nickel, Matt
• Polished Nickel
• Iron/Pewter
• Venetian Bronze

• Beautiful solid brass hinges require no mortising to install.
• Tight pin with a decorative ball tip.
• Installs with only a 1/16" gap between door and door frame.
• Uses #5 x 5/8 inch flat head screws. (Screws are included).
• Made from solid brass base material.
• Hinge is made for 3/4" to 7/8" thick door.
• Tip-to-tip measurement is 2-5/8".
• The large leaf measures 11/16" by 2" (not including the barrel).
• The barrel measures 1/4".
• Available in 10 different finishes. Click on link to view finish chart.
• PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.

Finishes:

• Satin Nickel, Matt (similiar to Stainless Steel finish)
• Oil Rubbed Bronze
• Polished Nickel
• Old Copper
• Flat Black
• Polished Brass
• Iron/Pewter
• Venetian Bronze
• Gloss Oil Rubbed Bronze
• Polished Chrome

• Requires no mortising to install.
• Leaves only a 1/16" gap.
• Tight pins.
• Finish is a dark statuary bronze.
• Steel base material.
• Uses flat head screws (not included but offered for purchase during checkout).
• For the #4 Flat Head Bronze finish screw use our SKU #286253.
• For the #5 Flat Head Bronze finish screw use our SKU #286254.
• PLEASE NOTE; screw hole patterns will vary slightly from those in the photo depending on size.

The dimension from the inside edge of the hinge pin to the edge of the leaf is as follows: for SKU 286000 9/16", for SKU 286004 11/16", for SKU 286008 3/4" and for SKU 286012 1"

Finishes:

• Statuary bronze

• No-mortise shutter hinge for interior shutters.
• Hinge is 3" tall and is made for shutters that are from 1" to 1-1/8" thick.
• Wrap around part of hinge leaf measures 7/8".
• Hinge pin is removeable so that hinge will work as a left hand or right hand hinge.
• Uses #6 flat head screws, not included but offered for purchase during checkout.
• Made from steel base material.

Finishes:

• Polished Nickel
• White

• For lift lids on stereos, toy chests, piano benches, etc.
• Steel base material
• Hinge measures 2" tall along hinge pin. Lid leaf measures 1-5/8" by 1"
• Opens approximately 195 degrees
• In the "Size" column below the size refers to the thickness of the back wall of the box.
• For the bronze model order our SKU #286253 (#4 x 5/8") bronze screws. Screws are not included but are offered for purchase during checkout.
• For the brass model use #4 flat head brass screws. Screws are not included but are offered for purchase during checkout.

Finishes:

• Bronze
• Brass plated

• This hinge locks in open and closed position (and also at 30 degrees and 90 degrees)
• It is good for bi-fold doors because it automatically locks flat in the open position
• The door will remain straight and can engage magnetic catches
• Size of hinge is 2-3/8" tall and 2-9/16" wide
• Uses #6 flat head screws (not included)
• Click on links below for more information on hinge
• Die cast metal base material
• For doors with a minimum stile width of 1-1/8"

Finishes:

• Dark Brown Powder Coat

• Hinge replaces bi-fold door hinges made by Johnson Hardware.
• Hinge measures 2-1/8" tall by 1-1/2" wide. Vertical screwhole spacing is 1-1/2" center to center. Legs on back of hinge project 1/2".
• Made from steel base material.
• Sheet metal screws are included.

Finishes:

• Yellow zinc chromate