• Fastener for casement windows, interior and exterior shutters.
• Fastener base material is steel and has a slightly rough flat black finish resembling wrought iron.
• Included are matching wood screws and 3 strikes to fit different applications (surface, mortise and edge mount)
• Turn piece measures approximately 5" by 3/4". Its baseplate measures 1-1/8" by 2-1/8".
• Turn piece profile is 1-7/8".

Finishes:

• Flat Black Wrought Iron

• Decorative slide bolt resembles a scorpion's tail.
• Overall length is 10".
• The base measures 5.5" by 2", including the strike plate.
• Made from steel base material.
• Matching screws are included.

Finishes:

• Flat Black

• Used to lock shutters in place
• Matches our other black forged and wrought iron hardware
• Comes with 3 different types of strike (surface, edge and mortise)
• "Arm Length" refers to the total length and diameter of the throw bolt.
• Features spring friction device to hold the bolt in any position (if installed verically).
• Steel base material
• Matching wood screws are included.

Finishes:

• Black wrought iron

• Heavy duty 12" shutter slide bolt
• The base measures 12" by 2" wide including the strike plate.
• Made of cast iron.
• Mounting screws are included.

Finishes:

• Black prime coated

• Shutter slide bolt is available in two sizes; 6" and 8"
• The base of the 6" model measures 6-1/2" by 1-3/4" including strike plate.
• The base of the 8" model measures 8-3/4" by 2" including strike plate.
• Made of cast iron
• Mounting screws are included

Finishes:

• Black prime coated

• Solid bronze surface bolt for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
• Surface bolt measures 8" long by 1-3/4" wide.
• Wood screws are included.
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.

Finishes:

• Natural Bronze

• Used to secure shutters
• Made from cast iron base material
• Black primer coated, ready for painting
• Available in 4 lengths
• Mounting plates measure 1-1/4" x 1"
• Wood screws are included

Finishes:

• Black Coated

• Bar latch measure approximately 1-5/8" wide by 1-1/4" tall
• Solid brass material
• Wood screws are included

Finishes:

• Polished Brass
• Oil Rubbed Bronze
• Satin Nickel

• Shutter stay for Bermuda style shutters.
• Shutter stay holds shutter in open position. Mounts at bottom of window and bottom of shutter.
• Hook and eye style shutter stay is 24" in length and 9/16" in diamter.
• Mounting plates are 1" x 1-1/4". Projection is 1"
• Hook is made of forged steel and plates are made of cast iron.
• Both hook and plates are powder coated black with a light texture.
• Wood screws are included for mounting plates

• For interior shutters or cabinets.
• Latch measures approximately 2-5/8" tall by 2-1/2" wide.
• Steel base material with a rough texture to simulate wrought iron.
• Matching wood screws are included.

Finishes:

• Flat black

• Fastener for casement windows, interior and exterior shutters.
• Fastener base material is steel and has a slightly rough flat black finish resembling wrought iron.
• Included are matching wood screws and 3 strikes to fit different applications (surface, mortise and edge mount)
• Turn piece measures approximately 5" by 3/4". Its baseplate measures 1-1/8" by 2-1/8".
• Turn piece profile is 1-7/8".

Finishes:

• Flat Black Wrought Iron

• Small drop ring pull for exterior shutters.
• Available in two models; a twisted ring model as shown in photo to left and a smooth ring model (to view click on link below).
• Diameter of ring is approximately 3". It is made out of 1/2" diameter material.
• Attachment plate measures 3.5" high by 1.5" wide. Pull projects 1.25" from surface it is mounted to.
• Made of steel base material.
• Wood screws are included.

Finishes:

• Flat Black

• Decorative ring for exterior shutters.
• Ring diameter is 4 inches.
• Made from steel base material.
• Matching wood screws are included.

Finishes:

• Black Powder Coated

• Decorative ring for exterior shutters.
• Ring diameter is 3 inches.
• Made from steel base material.
• Matching wood screws are included.

Finishes:

• Black Powder Coated

• Ring pull for exterior shutters.
• Diameter of ring is 3.25".
• Mounting plate diameter is approximately 2.75"
• Made from steel base material.
• Matching wood screws are included.

Finishes:

• Black Powder Coated

• Welded ring pull for shutters.
• Diameter of ring pull is 1-5/8".
• Lenth of threaded portion of screw eye is 7/8".
• Made from 3/8" diameter steel.

Finishes:

• Black

• Ring pull for shutters
• Made from cast iron
• Base measures 2" by 1-7/16"
• Matching screws are included

Finishes:

• Black prime coated

• Forged Iron pull for cabinets, shutters or windows.
• Pull measures 5" long by 1.5" wide by 7/8" projection.
• Made from steel base material.
• Includes matching wood screws.
• This pull is made to match our other forged iron hardware (hinges, etc).

Finishes:

• Black Forged Iron

• Shutter holder keeps shutter in the open position
• Made up of two parts; the spring keeper and the post and screw.
• The spring keeper is non-corrosive spring brass material.
• The post is solid brass, the screw is plated steel.
• After installation the shutter holder allows a 2" clearance between the face of the shutter and the wall
• The spring keeper measures about 7/8" tall by 1" wide (base) by 1" thick.
• The posts measures 1-3/4" tall. The screw is 1-1/2" long.
• Solid brass wood screws are included.

Finishes:

• Polished Brass

• Shutter holder keeps shutter in the open position
• Made up of two parts: the spring keeper and the post.
• The post is solid brass. The spring keeper is plated spring steel.
• After installation the shutter holder allows 2-5/8" clearance between face of shutter and wall.
• The spring keeper measures about 2" tall by 2-1/8" wide (base) by 3/4" thick.
• The post measures 2" tall.
• Wood screws are included.

Finishes:

• Brass
• Oil Rubbed Bronze
• Satin Nickel