• Shutter hinge is for interior shutters.
• Made to fit shutter panel thickness of 1" to 1-1/16".
• Hinge pin is removable.
• Hinge measures 2-1/2" tall by 2-1/2" wide as measured in the open position and not including the bend in the larger leaf.
• The bend in the larger leaf measures 7/8".
• Made from steel base material.
• Uses #6 flat head screws. Not included but offered for purchase during checkout. Each hinge uses up to 7 screws per hinge depending on how it is installed.

Finishes:

• White
• Bright Nickel
• Antique Brass

• Shutter hinge for interior shutters.
• Made to fit shutter panel thickness of 1-1/8" to 1-3/16".
• Hinge pin is removable.
• Hinge measures 2-1/2" tall by 2-1/2" wide as measured in the open position and not including the bend in the larger leaf.
• The bend in the larger leaf measures 15/16".
• Made from steel base material. The Stainless steel model is solid stainless steel and is suitable for installation in damp or corrosive environments.
• Uses #6 flat head screws (not included). Use up to 7 screws per hinge.
• When you checkout you will be offered for purchase screws with a matching finish. For the Polished Chrome and Brushed Chrome hinges the best match is the "Zinc plated" screw.

Finishes:

• Off White
• White
• Polished Chrome
• Brushed Chrome
• Bright Nickel
• Polished Brass
• Antique Brass
• Industrial Stainless Steel

• Interior shutter hinge measures approximately 3" tall by 3" wide not including bend in large leaf.
• Bend in large leaf measures 1".
• Made for use with 1" to 1-1/4" thick shutters.
• Hinge pin is removable.
• Steel base material.
• Hinge shown in photo is the Brass plated finish.
• Matching wood screws are included.

Finishes:

• Brass plated
• Antique brass

• No-mortise shutter hinge for interior shutters.
• Hinge is 3" tall and is made for shutters that are from 1" to 1-1/8" thick.
• Wrap around part of hinge leaf measures 7/8".
• Hinge pin is removeable so that hinge will work as a left hand or right hand hinge.
• Uses #6 flat head screws, not included but offered for purchase during checkout.
• Made from steel base material.

Finishes:

• Polished Nickel
• White

• Interior shutter hinge may be mounted on the edge or surface of the shutter.
• Pin is removable. Hinge leaf is reversible.
• For shutter thickness of 3/8" to 3/4".
• Hinge is 1-1/2" tall by 1-7/8" wide (not including bend in larger leaf).
• Bend in larger leaf measures 1/2".
• Two hinges will hold a 25lb shutter. Three hinges will hold a 37lb shutter.
• Steel base material. Wood screws are included.
• PLEASE NOTE: the brass finish as shown in the photo is no longer available. Bright nickel finish is still available.

Finishes:

• Bright Nickel

• Interior shutter hinge may be mounted on the edge or surface of the shutter.
• For a maximum door thickness of 3/4".
• Pin is removable. Hinge leaf is reversible.
• Hinge is 1-1/2" tall by 1-3/4" wide (not including bend in larger leaf)
• Bend in larger leaf measures 11/16"
• Two hinges will hold up to a 25lb shutter
• Three hinges will hold up to a 37lb shutter
• Steel base material
• #6 wood screws are included

Finishes:

• Brass finish

• Interior shutter hinge is made from .080 gauge steel.
• Made to use on 3/4" thick material.
• Flat leaf measures 1-1/2" tall by 2".
• Bent leaf measures 1-1/2" tall by 3/4" (from hinge pin to bend) and 1-1/2" tall by 1-1/4" (after bend).
• Flat head screws are included.
• Steel base material.

Finishes:

• Brass plated.
• Zinc Chromate plated.

• Interior shutter hinges with wrap around.
• Made for 3/4" thick doors.
• Fast pins.
• Steel base material.
• Flat head screws (#5 x 5/8") included.

Finishes:

• Brass Plated
• Chrome Plated

• Wide throw allows shutter to fold flat against the wall
• Two hinges will hold a shutter up to 25lbs
• Three hinges will hold a shutter up to 37lbs
• Hinge pin is removable
• Hinge measures 1-1/2" tall by 2-7/8" wide
• Long leaf is 2" wide
• Short leaf is 7/8" wide
• Steel base material
• Wood screws are included

Finishes:

• Brass finish

• Interpanel shutter hinge is used to join shutter panels on interior shutters.
• Hinge measures 1-1/2" tall by 1-1/4" wide.
• Steel base material.
• Wood screws are included.
• Hinge features high friction so that shutter panel holds in any position (open, closed, half way).
• Two hinges will hold a 20lb shutter, three hinges will hold a 30lb shutter.

Finishes:

• Brass

• Interior shutter hinge.
• Hinge measures 1-1/2" tall by 1-3/4" wide
• Hinge pin is removable
• Steel base material
• Wood screws are included
• Two hinges will hold a 25lb shutter
• Three hinges will hold a 37lb shutter

Finishes:

• Brass finish

• Shutter hinge is made for interior shutters.
• Hinge measures 1.5" tall by 1.75" wide.
• Hinge pin is removable.
• Steel base material.
• Matching wood screws are included.
• Two hinges will hold a 25lb shutter.
• Three hinges will hold a 37lb shutter.

Finishes:

• Brass plated
• Polished Chrome

• No-mortise hinges make excellent hinges for interior shutters. Because of the way they are built they leave only a very small gap between the shutter and the installation strip. Click on the link below to go to our No-Mortise Hinge section.