Hangers to hang screens on the outside of your window frame.

Casement fasteners are available in various finishes.

• Side mount sash balance for sash windows.
• When replacing your broken sash balance use a new sash balance with the same weight rating as your old sash balance. The weight rating should be stamped on the sash balances metal housing.
• Uses two flat head nails for mounting (not included).
• Side mount sash balances are sold by the pack. Each pack contains two balances.
• Made from steel base material.

• Twin sash balances are used on double hung wood sash windows.
• A sash balance counterbalances the weight of your sash window. Makes raising and lowering the window easy and helps to hold it in place when the window is open.
• Sash balances replace the older window system of sash cord, weights and pulleys.
• A twin sash balance is made up of two spring loaded wires and two cable feet per balance. The cable feet attach to the bottom corner of the sash window.
• Each sash balance has a weight rating (usually stamped on the sheet metal housing of the balance). When replacing a broken sash balance make sure to replace your old balance with the same weight rating.
• Lighter weight windows may only require one sash balance. Heavier windows will require two. See chart at link below for more specific information.
• Sash balance measures 7.5" by 3.25" by 3/4".
• Made of steel base material. Fastening nails, tension spring guides and installation instructions are included.

Casement hardware which will hold your casement window in a fixed position.

• Beautifully made solid brass sash pulley.
• For use with sash cord or sash chain.
• Pulley and face plate are made from solid brass. Pulley housing is made from plated steel.
• Face plate measures 4.5" by 1". Depth is 1.5".
• Pulley measures 3/8" wide by 1-5/8" diameter.
• Screwhole center-to-center distance is 3-7/8".
• Available in two styles; the square corner mounting plate as shown in photo or radius corner mounting plate (1/2" radius).
• Matching flat head wood screws are included.

Finishes:

• Satin Brass

• Very high quality solid brass ball bearing sash pulley.
• Pulley and face plate are made from solid brass. Pulley housing is made from plated steel.
• For use with sash cord or sash chain.
• Available in four faceplate finishes as listed below.
• Face plate measures 5-3/8" by 1-1/8". Depth is 2-5/16".
• Pulley measures 1/2" wide by 2-1/2" diameter.
• Screwhole center-to-center distance is 4-3/8".
• Matching flat head wood screws are included.

Finishes:

• Satin Brass
• Polished Brass
• Oil Rubbed Bronze
• Satin Nickel

• Pulley is made for sash windows which use a weight to counterbalance the window.
• For use with sash cord.
• Pulley diameter is 2" and pulley width is 3/8".
• Pulley housing pushes into a 5/8" by 2.5" opening and is held in place by saw teeth on the top and bottom of the housing.
• Depth of housing and pulley is approximately 1.75".
• No fasteners required.

Finishes:

• Brass
• Oil Rubbed Bronze

• Pulley is made for sash windows which use a weight to counterbalance the window.
• For use with sash cord.
• Pulley diameter is 2" and pulley width is 3/8".
• Pulley housing fits in an opening that is approximately 5/8" by 2-3/8".
• Face plate measures 1" by 4.5". Screw holes are 3-5/8" on center.
• Depth of housing and pulley is approximately 1.75".
• Steel base material.
• Wood screws are not included with this item.

Finishes:

• Zinc chromate

• For use with sash type windows which are counterbalanced by a weight, sash pulley and sash cord.
• The sash weight attaches to the sash cord by running the cord through the hole in the weight and by tying a knot on the end of the cord.
• The knot is held in a cavity on the underside of the weight.
• Click on link below to view the underside of the weight.

Finishes:

• Raw Cast Iron

• Sash Chain holds sash window in the open position.
• Overall length is 12".
• The attachment plates measure 1.5" x 1".
• Made from steel base material.
• Matching wood screws are included.

Finishes:

• Brass Plated
• Nickel Plated
• Oil Rubbed Bronze

• Chain for use in sash type windows with weights.
• Available in solid brass or stainless steel materials.
• Each link is approximately 3/4" long by 3/8" wide.
• Chain is sold by the full foot. For example if you need 4.5 feet please order 5 feet.
• Sash chain cuts easily with diagonal cutters.

Finishes:

• Solid Brass
• Solid Stainless Steel

• The Quiki window control tightens sash windows when the sash cord is broken.
• Installs easily between the window frame and the window. No tools necessary for installation.
• Can be used in new or old double hung windows.
• Made from 0.018" thick stainless steel.
• Size is 1-1/4" wide by 6" long.
• Sold by the package. There are two controls per package.
• You will need one or two controls per window depending on the weight and condition of the window.

Finishes:

• Stainless steel