Pie Cut Corner Hinges - Bi-Fold Door Hinges

Pie Cut Corner Hinges - Bi-Fold Door Hinges

  • Hinges designed for kitchen corner cabinets where two folding doors close into a corner cabinet.
  • Also known as
    • Pie Cut Corner hinges or
    • Bi-Fold door hinges.

Pie Cut Corner Hinge

Pie Cut Corner Hinge
  • Designed for kitchen corner cabinets.
  • Maximum opening angle 78 degrees.
  • Zinc die cast material.
  • This hinge replaces Pie-cut corner hinges by manufacturers such as Grass, Mepla and others.
  • This hinge uses 4 each #8 x 5/8 flat head screws per hinge (not included). Order our SKU 135128 for a package of 8 each #8 x 5/8 Flat Head Steel Screws. Screws will be offered for purchase during checkout.

Finishes:

  • Nickel plated
Click here for Information & Pricing

Blum Corner Hinge

Blum Corner Hinge
  • Designed for corner cabinets in a kitchen (often times there is a lazy susan behind the door).
  • For this type of bi-fold door one door is attached to the cabinet frame and the other door is attached to the first door.
  • This is the hinge that attaches the two doors together.
  • The hinge that holds the "two-door assembly" to the cabinet frame, is our Blum 170 degree hinge. To view this hinge, click on one of the following links
  • This hinge is the new version of Blum's Pie Cut Corner or Bi-Fold Door hinge. To view Blum's Old Style Bi-Fold Door Hinge click on link below. This new style hinge is functionally identical to the Old Style hinge.
  • Maximum opening is 60 degrees.
  • Three dimensional adjustment.
  • IMPORTANT: This hinge is made up of two parts; the hinge (SKU 268174) and a mounting plate (SKU 652304), which is ordered separately. The mounting plate is offered for purchase during checkout.
  • Screws are not included. Use our SKU #652360 if you need screws. The screws are offered for purchase during checkout.
  • Both the screws and the mounting plate are offered for purchase during checkout.
  • PLEASE NOTE: This hinge will not replace other brands of hinges because the hole that the hinge fits into is a partial hole (negative bore distance).


    Accesories available for this hinge (Offered for purchase at check-out):
    • Mounting plate, required for installation of this hinge (SKU 652304).
    • Hinge cover cap, covers adjustment screws on the arm of the hinge (SKU 268001).
    • Screws (SKU 652360)
    • 35mm Forstner Bit, for new installations (SKU 204000)

Finishes:

  • Nickel Plated
Click here for Information & Pricing

Mepla - Grass SSP Hinges for Pie Cut Corner Door

Mepla - Grass SSP Hinges for Pie Cut Corner Door
  • SSP hinges by Grass and Mepla are no longer available. Please read on to find out about the replacement hinge.
  • Originally produced by Grass and then by Mepla when Mepla purchased the Grass Company.
  • There is a Mepla hinge that may be used as a replacement if you have broken or missing SSP hinges.
    • Please click on the link below for instructions on how to replace these SSP hinges.
    • If your doors are 3/4" thick then there is a kit you can buy that will replace both hinges, included in the kit are 2 hinges, 2 mounting plates, screws, instructions and 2 wooden plugs needed to fill the old holes. The replacement hinge kit is our SKU 701192.
    • If your door is a thickness other than 3/4" thick then you will need to order the hinges, mounting plates and screws separately. Unfortunately Grass does not sell the wooden plugs separately so you will have to make them using a hole saw or a plug cutter.
    • Please click on the link below to go to our Mepla replacement hinge page.
  • IMPORTANT, PLEASE NOTE:
    • You will need to replace both hinges and both mounting plates on the door.
    • The replacement job does require some woodworking skills to accomplish.
    • Wood plugs needed to fill the existing holes need to be supplied by the installer of the hinge
    • If you order our Hinge Kit (SKU 701192), wood plugs are included in the kit.
    • If you order the separate components you will need to make your own wood plugs as they are not included.
    • They can be cut out of scrap lumber with a hole saw and ground down or sanded to fit. Install in the old hole using a wood clamp and wood glue.
    • Unfortunately, the wood plugs are not available separately, to get them you must order the Hinge Kit, SKU 701192
Click here for Information & Pricing

Mepla Pie Cut Corner Hinge

Mepla Pie Cut Corner Hinge
  • Mepla hinge is designed for pie cut corner cabinets.
  • This hinge attaches the middle door to the outer door.
  • Typically a 170 degree European hinge is used to attach the middle door to the cabinet.
  • Hinge and mounting plates are fully adjustable after installation.
  • All parts are made from steel and nickel plated.
  • This product is available two ways, either as separately ordered components or as a hinge kit (hinge kit is available only for 3/4" thick doors). The hinge kit may be used for new installations, however it is intended to facilitate the changeout of the obsolete Mepla SSP hinge, which is no longer available.
    • Info for ordering separately ordered components
      • This hinge is made up of two parts; the hinge and a mounting plate. Make sure to order both a hinge and the appropriate mounting plate.
      • For door thicknesses of 5/8" to 7/8" or 16mm to 22mm. Choose your mounting plate based on the thickness of your door.
      • For a 5/8" door thickness (16-17mm) order our 4mm mounting plate (SKU 207106).
      • For a 3/4" door thickness (18-20mm) order our 2mm mounting plate (SKU 207104).
      • For a 7/8" door thickness (21-22mm) order our 0mm mounting plate (SKU 207102).
      • The hinge comes with screws and plastic dowels. Dowels are typically used in MDF or particle board materials. The dowels can be discarded if installing in solid wood. Make sure to order wood screws for the mounting plates (2 per mounting plate). Make sure to order screws for the hinge (2 per hinge) if discarding the dowels. Screw size is a #6 flat head screw and is offered for purchase during checkout.
    • Information for Hinge Kit (this kit is for 3/4" thick doors only)
      • The hinge kit is our SKU 701192
      • This kit does not include plastic dowels. If you need plastic dowels, order our SKU 652368.
      • Contents of kit include
        • 2 each hinges (SKU 207100)
        • 2 each 2mm mounting plates (SKU 207104)
        • 8 each #6 flat head wood screws (SKU 652360)
        • 2 each wood plugs to fill the existing holes of the obsolete SSP hinge
        • 1 each paper drilling template
        • 1 each installation instructions
Click here for Information & Pricing

Generic Pie Cut Corner Hinge

Generic Pie Cut Corner Hinge
  • Generic European style hinge designed for corner cabinets. Also known as "Pie Cut" cabinet doors.
  • This hinge attaches the middle door to the outer door.
  • A pie cutcorner door typically uses170 degree European style hinge to attach thetwo door assembly to the cabinet frame.
  • Maximum opening angle is 105 degrees.
  • For door thicknesses of 5/8" and 3/4".
    • For a 3/4" thick door order the 0mm mounting plate.
    • For a 5/8" thick door order the 3mm mounting plate.
  • Screws for the mounting plates are not included but are offered for purchase during checkout.
  • The hinge cup installs in a 35mm (1-3/8") hole drilled in the back of the middle door.
  • A 3mm bore distance is required for the hinge cup (the bore distance is the distance from the edge of the door to the edge of the 35mm cup drilled in the back of the door).
  • Dowels and screws are included with each hinge.
    • Dowels are typically used in MDF or particle board material.
    • If mounting in solid wood, remove the dowels and use the included wood screws.
  • Hinges and mounting plates are made from steel base material and are nickel plated.
  • Hinge and mounting plates are fully adjustable after installation.
  • The diagram above shows the door in the closed position.
  • PLEASE NOTE: a European hinge is made up of two parts, the hinge and mounting plate. Please make sure to order at least 2 hinges and 2 mounting plates for each door you are hanging. Larger doors may require more than 2 hinges.

Click here for Information & Pricing

Blum Mounting Plate for Pie Cut Corner Doors

Blum Mounting Plate for Pie Cut Corner Doors
  • Blum mounting plate for pie cut corner doors. Also used for non-pie cut corner doors.
  • This mounting plate attaches to a cutout in the cabinet face frame.
  • It is used with Blum's "Modul"170 degree (SKU 652000) and 100 degree hinges (SKU 652001). Does not work with Blum's "Clip Top" style hinges).
  • The hinge attaches to the mounting plate with a screw rather than the current clip on system.
  • In the case of a pie cut corner installation, this mounting plate holds the two doors to the cabinet face frame.
  • Each plate uses 2 each #6 screws (not included but offered for purchase during checkout).
Click here for Information & Pricing
accredited business BBB
see what customers are saying

Over 10,000 Reviews
5 Star Average

Thank you for helping us find the hinges no store had! We are were very happy to find the hinges we were looking for - they look great ...
Very reliable vendor - would do business with again. Very prompt shipping and the order was processed flawlessly! ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com

Related Products