• Used for full size doors where a hidden door application is desired.
• As the door opens, the Rack and Pinion Pivot moves the pivot point away from the door jamb (7/8" movement) so that the hinge side edge of the door does not need to be rounded.
• Includes screws and all hardware needed for installation.
• Top and bottom gear boxes are designed to be fully mortised into floor and door frame.
• Full instructions are included with hinge (to view instructions click on link below).
• Standard application is for 1-3/8" or 1-3/4" doors.
• Maximum opening angle is 105 degrees.
• This unit is sold by the set. One set is needed per door.
• Maximum door weight is 50 lbs. and maximum door width is 36".

Finishes:

• Pivots are prime coated
• Brackets are brass plated

• Used for full sized doors where a hidden door application is desired.
• As the door opens, the Rack and Pinion Pivot moves the pivot point away from the door jamb (7/8" movement) so that the hinge side edge of the door does not need to be rounded.
• Includes screws and all hardware needed for installation.
• Top and bottom gear boxes are designed to be fully mortised into floor and door frame.
• Full instructions are included with hinge (click on link below to view instructions).
• Standard application is for 1-3/4" doors.
• Maximum opening angle is 105 degrees.
• This unit is sold by the set. One set is needed per door.
• Head gear box measures 3-1/4" x 1-1/4" x 5/8".
• Bottom gear box measures 3-1/4" x 3-5/8" x 1-1/16".
• Maximum door weight is 150lbs and maximum door width is 36".

Finishes:

• Gear boxes are satin brass plated
• Pivots are prime coated

• Spring loaded pivot set, holds open at 90 degrees, self closes at 45 degrees.
• For use on wood or metal doors up to 135 lb., not larger than 3.5 feet wide and 7 feet tall.
• Camtrol action makes possible a snug application without rounding of the door edge.
• Cam box mortises into wood floor.
• Cam boxes are brass, door brackets are steel (satin chrome plated), cam box trim plates are brass (satin chrome plated).
• For door thicknesses of 1-3/8" to 1-3/4".
• Each cam box measures 3-7/8" by 1-1/4" by 29/32" tall.
• Mounting fasteners and instructions are included.

Finishes:

• Satin Chrome

• Spring loaded pivot set, holds open at 90 degrees, self closes at 45 degrees.
• This product is the same as our SKU 234024 except that the bottom pivot surface mounts instead of installing in a mortise (cutout) in the floor. Made for masonry installations. This application requires a 1" gap between the bottom of the door and the surface of your floor.
• For use on wood or metal doors up to 135lb, not larger than 3.5 feet wide and 7 feet tall.
• Camtrol action makes possible a snug application without rounding of the door edge.
• Cam boxes are solid brass, door brackets are steel (satin chrome plated). Cam box trim plates are brass (satin chrome plated).
• For door thicknesses of 1-3/8" to 1-3/4".
• Top cam box measures 3-7/8" by 1-1/4" by 29/32" tall.
• Bottom surface mount plate measures 3-7/8" by 3-1/4".
• Mounting fasteners and instructions are included.

Finishes:

• Satin Chrome

• For doors from 1" to 1-3/8" door thickness.
• Hinge is completely concealed when door is closed.
• Hinge opens a maximum of 180 degrees.
• Made from high strength plated steel and heavy duty zinc alloy castings.
• Matching screws are included.
• Hinge shown in photo is SKU 900024.
• PLEASE NOTE: THESE HINGES ARE NOW SOLD BY THE EACH (FORMERLY SOLD BY THE PAIR). FOR A TYPICAL DOOR YOU WOULD NORMALLY ORDER 2 OR 3 EACH.

Finishes:

• Satin Brass
• Satin Chrome
• Black Epoxy

• For 1-3/4" and 2" door thicknesses.
• Hinge is completely concealed when door is closed.
• Hinge opens a maximum of 180 degrees.
• Made from high strength plated steel and heavy duty zinc alloy castings.
• For full size doors.
• Reinforced nylon at wear points for long life.
• Matching screws are included.
• Hinge shown in photo is SKU 900028.
• PLEASE NOTE: THESE HINGES ARE NOW SOLD BY THE EACH (FORMERLY SOLD BY THE PAIR). FOR A TYPICAL DOOR YOU WOULD NORMALLY ORDER 2 OR 3 EACH.

Finishes:

• Satin Brass
• Satin Chrome
• Black Epoxy

• Solid stainless steel hinges made by Soss. Suitable for marine environments, yachts, etc.
• For doors with a minimum door thickness of 1-3/8".
• Hinge is completely concealed when door is closed.
• Hinge opens a maximum of 180 degrees.
• Made from solid stainless steel.
• Matching stainless steel screws are included.
• Hinge shown in photo shows the satin stainless finish.
• The Soss #416SS hinges were previously numbered Soss #216SS.
• PLEASE NOTE; Soss stainless steel hinges are sold by the each. You would normally need to order 2 or 3 hinges per door.

Finishes:

• Satin Stainless Steel
• Polished Stainless Steel

• The Soss invisible spring closer gives you a spring closer that is totally invisible from either side of the door when the door is closed. This closer is meant to be used with regular Soss hinges of the same size (Use them in combination with regular Soss #216, #218 or #220 hinges).
• Closure rate is adjustable
• The spring can be installed either inside the door or inside the door jamb.
• Allow one spring closer for every 75lbs of door weight
• These Soss invisible closer hinges match the Soss regular invisible hinges (Soss #216, 218 and 220)
• Made of high strength plated steel and heavy duty zinc alloy castings.
• Click on link below for dimension chart and sizing chart for door thicknesses.

Finishes:

• Satin Brass
• Satin Chrome
• Black Epoxy

• A Soss router guide template makes the job easier and faster and will give you a perfect installation every time.
• A Soss router guide template allows you to cut both the shallow and the deep mortise required for installation.
• There is a Soss router guide template for each size Soss hinge.
• The template is held on the door and jamb with nails and removable guide pins locate the deep mortise.
• Made from hardwood
• You must have a Porter-Cable router guide bushing (Porter-Cable #42024) and locknut (Porter-Cable #42237) to use the Soss Router Guides. Order our SKU #900110 for the guide bushing and locknut. Router bit not included.

• The Soss Multiple Router Guide System allows you to set up a rounter guide for an entire door.
• It is especially efficient if you have a number of doors to mortise that will be using the same size hinge
• Includes router guides, aluminum channel rails, connecting angle rail, guide pins, locator pins and fasteners and a 4-page instruction booklet
• You must have a Porter-Cable router guide bushing (Porter-Cable #42024) and locknut (Porter-Cable #42237) to use the Soss Router Guides. Order our SKU #900110 for the guide bushing and locknut. Router bit not included.
• Router template guides are made from hardwood
• The Soss Multiple Router Guide System is available in 3 hinge sizes (Soss 216, 218, and 220) and it is available in either the 3 hinge model or the 4 hinge model. The 3 hinge model is shown in photo to left.

• This guide bushing and locknut is necessary to use any of our Soss Router Guides
• It is the same as a Porter Cable #42024 bushing and a Porter Cable #42237 locknut.
• Fits most routers
• Guide bushing I.D. measures 21/32"; O.D. measures 3/4"; distance past base is 9/16".

• Large (approx 3.25" tall) concealed hinge.
• Body is made of white polyamide, hinge face and linkage is made from Type 304 stainless steel.
• Excellent hinge for marine applications.
• Load capacity is 66lbs per pair of hinges and 110lbs for 3 hinges.
• Maximum door opening of 180 degrees.
• Uses 4 each #10 flat head screws per hinge (Not included but offered for purchase during checkout).

Finishes:

• White Polyamide with Stainless Face

• Large (approx 3.5" tall) concealed hinge.
• Body is made of brown polyamide, hinge face and linkage is made from Type 304 stainless steel.
• Excellent hinge for marine applications.
• Load capacity is 88lbs per pair of hinges and 132lbs for 3 hinges.
• Maximum door opening of 180 degrees.
• Uses 4 each #12 flat head screws per hinge (Not included but offered for purchase during checkout).

Finishes:

• Brown Polyamide with Stainless Face

• Touch latch is invisible from the outside of the door.
• When you use a touch latch no other hardware (knob, pull, latch) is needed on your door giving it a clean look.
• Available in either a regular duty or heavy duty model. The heavy duty model is slightly larger and has much stronger spring action. Use the heavy duty model for solid core or heavy doors.
• How it works; gently push in on the outside surface of the door. The door releases from the latch and pops outward.
• The auxiliary pusher (sold separately) is used where a vacuum condition exists (for example a small closet) or any situation where the door does not open easily.The auxiliary pusher may be used with either the regular duty or heavy duty latch.
• All mounting fasteners, a metal template and full instructions are included.
• The face and internal parts of the latch are made from solid brass and steel. The case is made from plastic.
• The auxiliary pusher is made from solid brass and nylon and the spring is made from steel.