• Heavy duty Lift-up hinge for overhead compartments
• Used in RV's, Kitchens, Buses, Trains, Aircraft and Furniture Built-ins
• Click on link below to see usage illustration
• Use for either 5/8" or 3/4" door thicknesses
• Recommended door size per pair of hinges is 20" by 11"
• Suggested weight capacity per pair of hinges is from 1-1/2 lbs to 8-1/8 lbs
• Hinge features positive stops in both the open and closed positions
• Surface mounted and completely invisible when installed
• Hinge holds open at 75 degrees
• Screws are not included but are offered for purchase during checkout. Each hinge uses 8 each #6 pan head screws.

Finishes:

• Nickel finish

• double acting
• for folding screens that fold in and out
• hinges use flat head screws (not included)
• steel base material

Finishes:

• brass plated
• statuary bronze plated

• Hinge is designed as a hinge for boat ladders.
• May be used anywhere a long hinge with a strong hinge knuckle is needed.
• Hinge is 6-3/4" long by 3/4" wide by 3/16" thick.
• Hinge knuckle is 1/2" diameter.
• Uses #10 flat head screws, not included but offered for purchase during checkout.

Finishes:

• Polished Stainless Steel

• made in England.
• surface mounted
• 1-1/2" joint length
• 2-1/2" width open
• solid brass base material
• #6 x 3/4" flat head screws are included

Finishes:

• Polished Brass

• Narrow mounting leaves measure 1/2" wide x 1-1/4" long.
• Tight-lock friction discs enable firm adjustments.
• Solid brass base material.
• Uses #4 flat head screws (not included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

• Dull Brass

• Brake-action pivots.
• For vanity type mirrors.
• Wedge action permits tight secure fastening and easy removal.
• Hinge measures 1-11/16" long by 13/16" wide by 7/16" thick.
• Steel base material.
• Uses 4 each #4 flat head screws (not included but offered for purchase during checkout).

Finishes:

• Nickel plated
• Brass plated

• Mirror hinge screws hold an oval or round framed mirror on dresser uprights
• Also known as a "Toilet Screw"
• Sold by the pair which is enough hardware to install one mirror
• Includes 2 inserts which thread into the wooden mirror frame
• Includes a 1/4" spacer for each screw which goes between the mirror and the upright
• The screw will fit up to a 2-1/8" wide upright
• The threaded part can easily be cut with a hacksaw for narrower upright widths
• Made of brass, steel and die cast parts

Finishes:

• Polished Brass

• Mirror pivot hinges for attaching a mirror between posts.
• Each pivot unit measures 2" by 1-1/4".
• Made from steel base material.
• Matching round head wood screws are included.

Finishes:

• Brass plated

• For flush mounted, 180 degree opening doors.
• Overall length is 3-1/2".
• Solid brass.
• #5 x 1/2" flat head screws are included.

Finishes:

• Polished Brass

• 3/8" offset for offset doors.
• Overall length is 4".
• Solid brass.
• #6 x 3/4" flat head screws are included.

Finishes:

• Polished Brass

• steel base material
• concealed pivot hinge for inset doors
• drill 7mm hole for plastic bushing
• for wood doors up to 1" thick
• #6 x 1/2" pan head screws included

Finishes:

• Black