• Very high quality, solid brass hinge. Designed for full mortise installation.
• This hinge works well on doors that are from 3/4" to 1" thick.
• Overall size is 2-1/2" tall by 1-11/16" (open).
• Tip-to-tip measurement is 3-1/2"
• Matching wood screws are included.
• One leaf is swaged to allow a smaller mortise.
• Middle screwholes are elongated to allow for vertical and horizontal adjustment during installation.
• Each leaf measures 11/16" by 2-1/2"
• Click on link to view a chart of available finishes for this hinge.
• PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.

Finishes:

• Flat Black
• Gloss Oil Rubbed Bronze
• Oil Rubbed Bronze
• Antique Copper
• Polished Brass
• Polished Nickel
• Polished Chrome
• Satin Nickel, Matt
• Iron / Pewter
• Venetian Bronze

• Very high quality, solid brass hinge. Designed for full mortise installation but can be used as a surface mounted hinge.
• This hinge works well on doors that are from 3/4" to 1" thick.
• Nominal size is 2" tall by 1-5/8" (open). The actual measurements are 1-31/32" x 1-19/32" (open).
• Tip-to-tip measurement is 2-3/4"
• Matching wood screws are included.
• Four screwholes are elongated to allow for vertical and horizontal adjustment during installation.
• Each leaf measures 1-31/32" by 11/16".
• Click on link to view a chart of available finishes for this hinge.
• PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.

Finishes:

• Flat Black
• Gloss Oil Rubbed Bronze
• Oil Rubbed Bronze
• Old Copper
• Polished Brass
• Polished Nickel
• Polished Chrome
• Satin Nickel, Matt
• Iron / Pewter
• Venetian Bronze

• Decorative finial tips on each pin end.
• Centered in-line wings require mortising only on the door.
• Steel base material.
• Each hinge uses 6 each #6 flat head screws (not included but offered for purchase during checkout). We are not able to obtain Antique English finished screws so we are offering brass screws as our best match for this finish.

Finishes:

• Antique English
• Polished Brass

• Hinge is made of steel base material.
• Decorative finial tips.
• Size is 2" tall by 1-1/2 inch wide.
• Tip-to-tip measurement is 2-13/16".
• Flat head matching wood screws are included.
• Hinge is shown in polished brass finish. To view other finishes click on link below.

Finishes:

• Polished Brass
• Antique Copper
• Satin Nickel
• Polished Nickel
• Oil Rubbed Bronze

• Excellent quality solid brass full mortise hinge
• Measures 4-3/4" tip-to-tip
• Each leaf measures 3/4" wide by 2-1/4" tall (measurement does not include hinge barrel)
• Hinge barrel is approximately 7/16" in diameter
• One hinge leaf is offset to provide a minimum gap when the door is closed
• Matching wood screws are included

Finishes:

• Satin Nickel
• Polished Brass
• Oil Rubbed Bronze
• Antique Pewter
• Antique English
• Polished Nickel

• Excellent quality solid brass full mortise hinge made for doors that range from 3/4" to 1" thick.
• Measures 3-1/2" tip-to-tip.
• Each leaf measures 5/8" wide by 2-1/4" tall (measurement does not include hinge barrel).
• Hinge barrel is approximately 5/16" in diameter.
• One hinge leaf is offset to provide a minimum gap when the door is closed.
• Matching wood screws are included.
• PLEASE NOTE: Satin Nickel finish (as shown in photo) is no longer available.

Finishes:

• Polished Brass
• Oil Rubbed Bronze
• Antique Pewter
• Antique English
• Polished Nickel

• Beautifully finished solid brass hinge is made in Italy.
• Hinge is a lift-off hinge. Door can be removed without removing hinges.
• Each hinge plate measures approximately 2" by 11/16".
• Matching wood screws are included.
• Hinge measures 6" tip to tip.
• Hinge barrel is slightly offset and measures 1/2" in diameter.
• These hinges are handed. Order Left Hand hinges for left hand doors and Right Hand hinges for right hand doors.
• When viewing your cabinet from the front, your left hand doors are on the left side of the cabinet and your right hand doors are on the right side.
• Hinge shown in photo is a right hand hinge.
• PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.

Finishes:

• Satin Nickel, Matt
• Antique Brass
• Polished Brass
• Oil Rubbed Bronze

• Beautiful solid brass hinge, made in Italy.
• Measures 6-1/8" tip-to-tip, top hinge plate is 2-1/8" tall, bottom hinge plate is 2" tall.
• Fits cabinet doors with a 3/8" inset and a 3/8" lip.
• This hinge is a "lift off" hinge. After the hinges are installed the door may be lifted off the cabinet without uninstalling the hinges.
• These hinges are handed. Order Left Hand hinges for left hand doors and Right Hand hinges for right hand doors.
• When viewing your cabinet from the front, your left hand doors are on the left side of the cabinet and your right hand doors are on the right side.
• Hinge shown in photo is a left hand hinge.
• Free swinging hinge.
• Matching wood screws are included.
• PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.

Finishes:

• Oil Rubbed Bronze
• Satin Nickel, Matt
• Polished Brass
• Antique Brass

• Very good quality solid brass full mortise hinge
• Made for door thicknesses of 3/4" to 1-1/8".
• Measures 4-3/4" tip-to-tip.
• Each leaf measures 13/16" wide by 2-1/4" tall (measurement does not include hinge barrel).
• Hinge barrel is approximately 7/16" in diameter.
• One hinge leaf is swagged to provide a minimum gap when the door is closed.
• Matching wood screws are included.
• Made from solid brass material.
• Hinge shown in photo is the Antique Brass finish.

Finishes:

• Polished Brass
• Antique Brass

• Size is 2-1/2" tall by 1-5/8" wide
• Tip-to-tip measurement is 3-9/16"
• Decorative finial tips
• Steel base material
• Matching flat head screws are included
• Finish shown in photo is Satin Nickel

Finishes:

• Satin Nickel
• Statuary Bronze
• Antique Brass
• Polished Brass
• Oil Rubbed Bronze

• Excellent quality solid brass hinge
• Measures 8-3/8" tip to tip
• Each leaf measures 3/4" wide by 2-1/4" tall (measurement does not include hinge barrel)
• Hinge barrel is approximately 7/16" in diameter
• Matching wood screws are included.

Finishes:

• Oil Rubbed Bronze
• Antique Pewter
• Antique English
• Polished Nickel

• Very good quality solid brass hinge for armoires, cabinets, etc. Hinge is designed for full mortise installation on inset doors. Hinge is swagged to minimize gap between hinge leaves.
• Measures 12" tip-to-tip.
• Each leaf measures 13/16" wide by 2-1/4" tall (measurement does not include hinge barrel).
• Hinge barrel is approximately 7/16" in diameter.
• Length of hinge barrel between leaves is 3-7/8".
• Matching wood screws are included.

Finishes:

• Antique Brass
• Polished Brass

• made in Italy
• beautifully polished finish
• solid brass
• upper half “lifts-off" of lower half
• hinges are handed left or right
• to determine which "hand" hinge you need, stand with your back to the side of the door which shows the hinge pins: the right hand hinge will be on your right hand side and the left hand hinge will be on your left hand side
• uses #7 flat head screws (not included)
• PLEASE NOTE; THESE HINGES HAVE BEEN DISCONTINUED BY THE MANUFACTURER. WE HAVE LIMITED STOCK ON HAND. DISCONTINUED HINGES ARE NOT RETURNABLE.

Finishes:

• Polished Brass

• made in Italy
• beautifully polished finish
• solid brass
• upper half “lifts-off" of lower half
• hinges are handed left or right
• to determine which "hand" hinge you need, stand with your back to the side of the door which shows the hinge pins: the right hand hinge will be on your right hand side and the left hand hinge will be on your left hand side
• uses #7 flat head screws (not included)
• PLEASE NOTE; THESE HINGES HAVE BEEN DISCONTINUED BY THE MANUFACTURER. WE HAVE LIMITED STOCK ON HAND. DISCONTINUED HINGES ARE NOT RETURNABLE.

Finishes:

• Polished Brass

• Very nice ball tip hinge made from steel.
• Available in five finishes.
• Hinge thickness is 0.040".
• Joint length means distance along hinge pin not including ball tips.
• Matching flat head screws are included.
• PLEASE NOTE: SKU 504525 is actually made from solid brass but since the screws that come with it are made from steel we must include this hinge in the steel hinge section.

Finishes:

• Polished Brass
• Oil Rubbed Bronze
• Satin Nickel
• Polished Nickel
• Antique Brass

• Drive in hinge is mounted by driving into pre-drilled holes.
• Doors can be lifted off with ease.
• Features a finial tipped barrel.
• SKU #286-262 is 2-3/4" long by 11/32" diameter barrel.
• SKU #286-263 is 4-3/8" long by 11/32" diameter barrel.
• Ribbed attachment pins are 7/32" diameter by 11/15" long.
• Made from steel base material.
• No screws are needed.

Finishes:

• Bronze Plated

• hinge is mounted by driving it into predrilled holes
• doors can be lifted off with ease
• features a finial tipped barrel
• ribbed pins are 7/32" diameter by 15/16"
• hinge is 2-5/8" long by 11/32" diameter
• steel base material
• no screws needed

Finishes:

• Brass plated

• steel base material
• decorative finial tip at each pin end
• 6 knuckle design
• flat head screws are included

Finishes:

• Antique English

• Available in two sizes; large (2-1/2" x 2-1/2") and small (2" x 2")
• Tip-to-tip measurements are 4-1/2" (large size) and 4" (small size)
• Hinge pin is loose and may be removed
• Photo to left shows the large size
• To see the small size click on the link below
• Screws (#6 flat head) are not included and are not available. We suggest using zinc plated screws. Sand the finish off the screw heads with very fine grain sandpaper and oxidize them with a mild acid so they match the natural look of these unique hinges.

Finishes:

• Natural Cast Iron, Unfinished

• Beautifully finished with ball tips on each end
• Made from Solid brass
• Number of screw holes varies with hinge size
• Matching flat head screws are included

Finishes:

• Polished Brass
• Antique Brass

• Best quality extruded hinges.
• Designed for installation on cabinets with a minimum 3/4" thickness.
• The tips on these hinges screw on and off and the hinge pins are removable.
• Hole patterns vary according to size of hinge.
• Solid brass.
• Flat head screws are included

The 3" x 2-1/2" hinges are thinner (0.093" rather than 0.125") than similiar sized hinges so they can be used as "screen door" hinges which tend to be installed as full surface hinges.

Finishes:

• Polished Brass
• Dark Bronze

• These hinges are very high quality solid brass hinges (extruded brass)
• The tips on these hinges screw on and off and the hinge pins are removable.
• They come complete with matching solid brass philips head wood screws
• All hinges have 6 screw holes per hinge except for the 1.5" by 1.5" which have 4 holes per hinge
• All hinges have beautiful ball tip finials
• Solid brass base material

Finishes:

• Polished Chrome
• Antique Brass
• Satin Nickel

• Very nice ball tipped hinge made from steel.
• Available in four finishes. The upper left hand hinge shown in the photo is the Oil Rubbed Bronze, (moving clockwise) Polished Brass, Polished Nickel, Satin Nickel.
• Hinge thickness is 0.059".
• Joint length means distance along hinge pin not including the ball tips.
• Photos to left show the 2-7/16" tall hinge with 6 screw holes per hinge. The 1-15/16" hinge has 4 screw holes per hinge.
• Matching flat head screws are included.
• PLEASE NOTE: These hinges have a loose pin. If the hinge is installed with the hinge pin in a vertical position, install the hinge so that the hinge pin can be pulled out from the top of the hinge rather than the bottom.

Finishes:

• Oil Rubbed Bronze
• Polished Brass
• Satin Nickel
• Polished Nickel

• Beautiful ball tipped cabinet hinge available in 10 different finishes.
• Made from solid brass.
• May be installed as a surface mounted hinge or as a full mortise hinge (3/4" to 1" door thickness).
• Hinge measures 1-15/16" tall by 1-9/16" wide.
• Features oblong holes which allow vertical and horizontal adjustment of hinge.
• Click on "Finish Chart" to view available finishes.
• Matching wood screws are included.

Finishes:

• Iron / Pewter
• Satin Nickel
• Oil Rubbed Bronze
• Polished Nickel
• Old Copper
• Flat Black
• Polished Brass
• Venetian Bronze
• Gloss Oil Rubbed Bronze
• Polished Chrome

• Click on the link below to go to our 'No-Mortise Hinge' section where you will find more Finial Tipped Hinges.