• These hinges feature a loose joint which allows the door to be easily removed after the hinges are installed
• #5 x 3/4" flat head screws are included
• When ordering please note that these hinges come in Left Hand or Right Hand. (for example a pair of Left Hand hinges is 2 Left Hand hinges)
• Solid brass base material
• Click on the link below for more handing information

Finishes:

• Dark antique brass

• Hinge measures 4-1/2" high by 4" wide
• Loose joint hinge, opened door may be lifted off after installation
• Comes in either a right hand or left hand model
• Steel base material, comes complete with matching #12 wood screws
• Hinge thickness is .139". Hinge Pin diameter is .308".

Finishes:

• Satin Chrome
• Oil Rubbed Bronze
• Prime Coated

• Solid Brass "Lift-off" or "Loose Joint" hinges.
• Allows opened door to be lifted off without removing the hinges.
• Available in Left Hand or Right Hand models.
• All hinges are 1/16" in thickness.
• Screws are not included. All hinges use #6 flat head screws. Screws are offered for purchase during checkout.
• 1-1/2" hinge uses 8 screws per pair
• 2" hinge uses 12 screws per pair
• 2-3/4" hinge uses 16 screws per pair

Finishes:

• Polished Brass
• Polished Chrome

• No mortise style hinge. Hinge installs as a normal full mortise butt hinge but no mortising is required.
• Leaves only a 1/8" gap after installation.
• Top leaf rides on a ball bearing located on the top of the hinge pin.
• Hinge is not handed, may be used on left or right opening doors.
• Hinge shown in photo is shown in the "door open" position.
• Hinge is a lift off hinge, door may be lifted off after hinge is installed without removing any screws.
• Made from solid type 304 stainless steel.
• Available in two sizes, a 4" high hinge and a 5" high hinge.
• The 4" hinge leaf is 1-5/8" wide not including the hinge barrel. The hinge barrel diameter is 5/8".
• The 5" hinge leaf is 1-3/8" wide not including the hinge barrel. The hinge barrel diameter is 3/4".
• Weight ratings listed below are for a pair of hinges.
• Stainless steel flat head screws are included.

Finishes:

• Satin Stainless Steel

• Small hinge for exterior shutters or doors.
• "Lift-off" feature allows shutter or door to be easily removed after installation.
• Hinge is made to be surface mounted.
• Hinge is non-handed. Will work on either left hand or right hand shutters.
• Hinge measures 2-5/16" tall by 1-7/8" wide in the open position as shown in the photo.
• Made from steel and zinc chromate plated.
• Wood screws are included.
• Sold by the pair. A pair is two complete hinges which is normally what is needed to hang one shutter.

• Our lowest priced lift-off hinge.
• Hinges feature a loose joint so that door may be easily removed after installation.
• Height is 1-3/4", width is 1-9/16".
• Hinge is made from steel and brass plated.
• Wood screws are included.
• This hinge is only available as shown, not handed. See link below for view of separated hinge.
• Sold by the pair. A pair is normally what you need to hang one door.

• Made for boat hatches and other hatch covers.
• Hinge is made for hatch covers that are flush with what they are hinged to.
• Hinge may be taken apart by removing clevis pin.
• Clevis pin is secured by a stainless ring.
• Made from polished stainless steel (Type 316 Stainless Steel).
• Uses #10 flat head stainless steel screws (not included but offered for purchase during checkout).
• Hinge is sold by the each. You would normally order two hinges per hatch.
• Click on link for hinge dimensions.
• PLEASE NOTE: this hinge is designed with a fairly loose fit so that it is easy to remove the clevis pin.

• "Quick Release" hinge features a hinge pin release mechanism that allows door or lid to be easily removed.
• Hinge pin is spring loaded to keep the door or lid safely locked on to the cabinet or box.
• To remove the door or lid, the hinge pin may be retracted by pushing the knurled knob down and pivoting it into the unlocked position.
• Hinge is designed to be surface mounted.
• Hinge measures approximately 1-3/4" tall and 2" wide in the open position.
• Made from solid stainless steel.
• Uses #6 pan head screws (4 screws per hinge), not included, but offered for purchase during checkout.
• PLEASE NOTE: These hinges are handed (Right Hand or Left Hand). Make sure to order one Right Hand AND one Left Hand hinge for each door or lid you are hanging. The image shown to the left is a "Right Hand" model.

Finishes:

• Satin Stainless Steel

• Hinges feature a loose joint so that door may be easily removed after installation
• Hinges are available in a "left hand" or a "right hand" model
• Hinge shown in photo is a "left hand" hinge
• Stainless steel base material (type 304 stainless)
• Hinges are metric so the inch dimensions listed below are approximate. Click on link below for exact metric dimensions.
• Uses #4 flat head screws (not included but offered for purchase during checkout). Each hinge uses 4 screws.
• Hinges are sold by "Each". Order 2 each per door.

Finishes:

• Stainless Steel

• Hinges feature a loose joint so that door may be easily removed after installation
• Hinges are available in a "left hand" or a "right hand" model
• Hinge shown in photo is a "left hand" hinge
• Stainless steel base material (type 304 stainless)
• Hinges are metric so the inch dimensions listed below are approximate. Click on link below for exact metric dimensions.
• Uses #4 flat head screws (not included but offered for purchase during checkout). Each hinge uses 6 screws.
• Hinges are sold by "Each". Order 2 each per door.

Finishes:

• Stainless Steel

• Hinge lifts apart so lid or door may be easily removed.
• Steel base material.
• Joint length is 1-5/16".
• Open width is 1-5/16".
• Uses #4 pan head screws (not included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

• Nickel Plated

• hinge is mounted by driving it into predrilled holes
• doors can be lifted off with ease
• features a finial tipped barrel
• ribbed pins are 7/32" diameter by 15/16"
• hinge is 2-5/8" long by 11/32" diameter
• steel base material
• no screws needed

Finishes:

• Brass plated

• Drive in hinge is mounted by driving into pre-drilled holes.
• Doors can be lifted off with ease.
• Features a finial tipped barrel.
• SKU #286-262 is 2-3/4" long by 11/32" diameter barrel.
• SKU #286-263 is 4-3/8" long by 11/32" diameter barrel.
• Ribbed attachment pins are 7/32" diameter by 11/15" long.
• Made from steel base material.
• No screws are needed.

Finishes:

• Bronze Plated

• Steel base material.
• Hinge lifts apart so lid or door may be easily removed.
• Joint length is 1-5/16".
• Open width is 1-7/8".
• Used on cabinet or case where a removable cover is desired uses
• Uses #6 pan head screws (not included included but offered for purchase during checkout).Uses 4 screws per hinge.

Finishes:

• Nickel Plated

• Hinge has 2 knuckle design.
• Hinge slips apart at knuckle so lid or door may be easily removed.
• Steel base material.
• Joint length is 1-1/4".
• Open width is 1-1/2".
• Uses #6 pan head screws (not included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

• Nickel Plated

• Hinge lifts apart so lid or door may be easily removed.
• Joint length is 2-1/4".
• Open width is 1-7/8".
• Steel base material.
• Uses #8 pan head screws (not included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

• Zinc Plated

• made in Italy
• beautifully polished finish
• solid brass
• upper half “lifts-off" of lower half
• hinges are handed left or right
• to determine which "hand" hinge you need, stand with your back to the side of the door which shows the hinge pins: the right hand hinge will be on your right hand side and the left hand hinge will be on your left hand side
• uses #7 flat head screws (not included)
• PLEASE NOTE; THESE HINGES HAVE BEEN DISCONTINUED BY THE MANUFACTURER. WE HAVE LIMITED STOCK ON HAND. DISCONTINUED HINGES ARE NOT RETURNABLE.

Finishes:

• Polished Brass

• made in Italy
• beautifully polished finish
• solid brass
• upper half “lifts-off" of lower half
• hinges are handed left or right
• to determine which "hand" hinge you need, stand with your back to the side of the door which shows the hinge pins: the right hand hinge will be on your right hand side and the left hand hinge will be on your left hand side
• uses #7 flat head screws (not included)
• PLEASE NOTE; THESE HINGES HAVE BEEN DISCONTINUED BY THE MANUFACTURER. WE HAVE LIMITED STOCK ON HAND. DISCONTINUED HINGES ARE NOT RETURNABLE.

Finishes:

• Polished Brass