• European style glass door hinges for inset, overlay and twin overlay glass doors.
• Hinges feature a 94 degree opening angle and 3 dimensional adjustment.
• This hinge system requires that the glass door have a 26mm hole bored for each hinge used.
• They work with glass thicknesses of 4.5mm to 7mm (slightly under 3/16 to slightly over 1/4 inch).
• The hinge system is made up of 4 items which are ordered separately; the hinge, the cover cap, the mounting plate and the wood screws for the mounting plate.
• The hinges come in 3 types; "Straight Arm" for overlay doors, "Half Cranked" for twin overlay doors (also known as "Back-to-Back" doors, and "Full Cranked" for inset doors.
• The "Cover Caps" (required to hold glass door to hinge system) are available in 3 finishes; flat black, chrome and gold. Screws to hold cover cap to hinge are included with hinge. The outside diameter of the cover cap is 1-1/4".
• All parts of the hinge and cover cap that touch the glass are plastic material.
• Order hinges and cover caps on this page. Mounting plates and wood screws are offered for purchase during checkout.
• Please check out information link to find SKU number for hinge mounting plates.

Finishes:

• Flat Black Cover Cap
• Chrome Cover Cap
• Gold Cover Cap

• Glass door hinge for inset applications
• Fits glass thickness of 4 to 8 mm (5/32" to 5/16").
• Hinge clamps to glass so no boring of glass is required. Clamp screws are included.
• Type 304 stainless steel.
• Maximum door size is 15-3/4" high by 23-5/8" wide.
• Hinge measures approximately 1" high by 1-1/4" wide by 3/4" thick. See dimensional diagram for actual measurements.
• Flat head wood screws are included.

Finishes:

• Polished Stainless Steel

• Glass door hinge for inset doors. No boring of glass is required.
• Made from Type 304 stainless steel.
• For glass doors 5/32" to 5/16" thick and up to 51" tall and 17-3/4" wide.
• Screws are included.
• Hinge measures approximately 2-3/8" tall and 1-1/4" wide and 3/4" thick.
• For exact dimension click on link below.

Finishes:

• Polished Stainless Steel

• Inset type glass door hinge.
• Requires two holes (approximately 3/8") bored in glass to install.
• Hinge measures approximately 1-7/8" tall.
• Leaf that attaches to glass is about 1-3/8" wide.
• Leaf that attaches to side panel is about 2" wide.
• Screws to attach hinge to side panel are not included (uses #6 Pan Head, stainless steel screws are offered for purchase during checkout). All other fasteners are included.
• The hinge body is polished stainless steel (type 304). The fixing plate (attaches to front of glass) is made from zinc allow and is polished chrome plated.
• For glass thicknesses from 3/16" to 5/16".
• For glass doors up to 26 lbs and 25.5" wide (per pair of hinges).

Finishes:

• Polished Chrome and Polished Stainless Steel

• installs easily without boring through glass doors
• positive self-locking feature eliminates the need for magnetic or touch latches
• glass secured with large rubber tipped screw
• opening angle is 160 degrees
• hinge measures approximately 1-3/16" tall and each hinge wing is approximately 1-1/2" wide.
• for left or right hand installations
• glass thickness to 1/4"
• steel base material
• uses #6 round or pan head screws (not included). Uses 4 screws per pair of hinges.

Finishes:

• Chrome plated
• Brass plated

• Installs easily without boring through glass doors.
• Includes self adhesive pressure plates and screws.
• Screw-mounts to side of cabinet.
• Opening angle is 110 degrees.
• For left or right hand installations.
• For glass thicknesses of 3/16" to 1/4".
• Side mount plate measures 1-1/2" by 5/8" by 5/8". Glass bracket measures 1-5/8" x 3/4" tall by 1/2" thick.
• Made from steel base material.
• Uses #6 pan or round head screws (not included). Uses 4 screws per pair of hinges.

Finishes:

• Chrome plated
• Brass plated
• Black

• Installs easily without boring through glass doors.
• Opening angle is 110 degrees.
• For left or right hand installations.
• For glass thicknesses to 1/4" (6.5mm).
• Visible height is 20 mm (Approx. 25/32").
• Outside diameter of pivot point bushing is 5/16".
• Made from steel base material.
• Includes self adhesive pressure plates, machine screws, press-fit black plastic bushings and set screws to hold glass.

Finishes:

• Chrome plated
• Brass plated
• Black finish

• Installs easily without boring through glass doors.
• Includes self-adhesive pressure plates, machine screws, press-fit black plastic bushings, and set screws to hold glass.
• Sold by the pair. A pair will hang one glass door.
• Opening angle is 110 degrees.
• For left or right hand installations.
• To install the press-fit black plastic bushing, drill a 3/8" diameter hole (1/4" depth).
• Glass thickness to 3/16" (5 mm).
• Visible height is 13.5 mm (Approx. 17/32").
• Made from steel base material.

Finishes:

• Chrome plated
• Brass plated
• Black finish
• Satin Nickel finish

• Slide-on pulls for small glass doors.
• Made for glass doors up to 3/16" thickness.
• Pull features a built-in finger grip.
• Made from steel base material.
• Available in 4 finishes.
• Pulls measure 1-9/16" tall by 7/8" wide by 3/8" thick (not including finger pull).

• Glass door hinge for overlay doors.
• Stainless steel base material with an aluminum cap screw.
• Free swinging.
• Uses #4 flat head wood screws (not included but offered for purchase during checkout.) Order 3 screws per hinge.
• Overlay dimension is 3/8".
• Requires a 7mm hole drilled in the glass.
• For glass thicknesses of 4mm (5/32"), 5mm (3/16") and 6mm (15/64")

Finishes:

• Stainless Steel

• Glass door hinge for inset doors
• Requires a 7mm hole drilled in the glass
• Free swinging
• For glass thicknesses of 4mm (5/32"), 5mm (3/16"), and 6mm (15/64")
• Maximum door weight for a pair of hinges is 8.8 lbs
• Maximum door size is 17-3/4" wide by 27-1/2" high per pair of hinges
• Uses #4 flat head wood screws (not included but offered for purchase during checkout) Order 3 each screws per hinge.
• Made from steel base material.

Finishes:

• Polished Chrome
• Polished Brass

• Glass door hinge for cabinets without a face frame.
• Hinge overlays side panel.
• Hinge requires small hole bored in glass to install
• Steel base material. Snap catch is made from nylon.
• Uses #4 flat head screws not included but offered for purchase during checkout. (for side panel attachment). Order 3 each screws per hinge.
• Fasteners to attach hinge to glass are included.
• Hinge features built in nylon snap catch to hold door in closed position.
• Hinge shown in photo is chrome hinge. Hinge is show in 1/2 open position.

Finishes:

• Chrome
• Polished Brass
• Flat Black

• Aximat hinge for glass door with wood side panel.
• Includes plastic spacer plates to protect glass.
• For glass thickness of 5 mm to 6 mm.
• Available in two sizes; SKU 796604 is for a door overlay of 12 mm and a side panel thickness of 16 mm. SKU 796606 is for a door overlay of 15 mm and a side panel thickness of 19 mm.
• Each hinge uses two types of screws. One #5 or #6 flat head screw to attach to the side panel and two "System screws" to attach the the side panel. The screw holes for the "System screws" are located under the black plastic cover shown in the photo. Screws are not included but offered for purchase during checkout.
• Hinge will allow door to open 270 degrees.
• Made from steel base material.

Finishes:

• Nickel plated

• Magnetic touch latch and steel plate work together to provide a latch for glass doors.
• To operate the touch latch simply push it in, it will then pop the glass door out so it can be easily opened.
• Use the single touch latch where there is only one door.
• Use the double touch latch where two doors close together in the middle of the cabinet.
• Use the "Push-In" touch latch where you have a wooden horizontal shelf. The Push-In touch latch pushes into a hole drilled in the edge of the shelf.
• The wrap around plates are available in 3 finishes.
• The wrap around plate is made out of steel so as to work with the magnet in the touch latch.
• The wrap around plates will work for 3/16" thick glass and include self adhesive plastic cushioning material for the glass. They are held in by pressure.
• The wrap around plates will work for 1/4" glass if you shim the glass with a small piece of plastic tape. Discard the self adhesive plastic cushioning material.
• Touch latches use a #4 Round head screw (not included) Screws are offered for purchase during checkout.
• Be sure to order one wrap around plate for each glass door.

Finishes:

• Black Plastic (Single Touch Latch)
• Black Plastic (Double Touch Latch)
• Black Plastic (Push-In Touch Latch)
• Polished Brass (Plate)
• Polished Chrome (Plate)
• Black (Plate)

• Used for standard wall to glass installation.
• Solid brass drop forged construction.
• Stainless steel reversible hinge pin.
• Opens to 90 degrees
• Hinge pin is reversible which allows it to be set at 0 degrees or 5 degrees. The 5 degree setting holds the door against a stop.
• Springs are hardened stainless steel coil springs.
• Fits tempered glass sizes from 3/8" to 1/2"
• Wall plate measures 1-15/16" by 3-1/2" tall. Glass leaf measures 2-1/8" by 3-1/2" tall.
• Hinge is designed to fit industry standard templates.
• Comes complete with gaskets and allen wrench. Does not include wall mount screws.
• PLEASE NOTE; installation of this hinge requires a cutout in the glass where the hinge is installed.

Weight rating using 3/8" glass; using 2 hinges maximum weight is 80lbs and 28" maximum width. Using 3 hinges maximum weight is 120lbs and 32" maximum width.

Weight rating using 1/2" glass; using 2 hinges maximum weight is 80lbs and 26" maximum width. Using 3 hinges maximum weight is 120lbs and 30" maximum width.

Finishes:

• Bright Chrome
• Brushed Nickel

• Used for standard glass to glass installation.
• Solid brass drop forged construction.
• Stainless steel reversible hinge pin.
• Opens to 90 degrees
• Hinge pin is reversible which allows it to be set at 0 degrees or 5 degrees. The 5 degree setting holds the door against a stop.
• Springs are hardened stainless steel coil springs.
• Fits tempered glass sizes from 3/8" to 1/2"
• Each glass leaf measures 2-1/4" wide by 3-1/2" tall.
• Hinge is designed to fit industry standard templates.
• Comes complete with gaskets, screws, allen wrench.
• PLEASE NOTE; installation of this hinge requires a cutout in the glass where the hinge is installed.

Weight rating using 3/8" glass; using 2 hinges maximum weight is 80lbs and 28" maximum width. Using 3 hinges maximum weight is 120lbs and 32" maximum width.

Weight rating using 1/2" glass; using 2 hinges maximum weight is 80lbs and 26" maximum width. Using 3 hinges maximum weight is 120lbs and 30" maximum width.

Finishes:

• Brushed Nickel
• Oil Rubbed Bronze

• Used for standard glass to glass installation.
• Solid brass drop forged construction.
• Stainless steel reversible hinge pin.
• Used to mount a door to a fixed glass side panel that runs at a 135 degree angle to the door.
• Hinge pin is reversible which allows it to be set at 0 degrees or 5 degrees. The 5 degree setting holds the door against a stop.
• Springs are hardened stainless steel coil springs.
• Fits tempered glass sizes from 3/8" to 1/2"
• Each leaf measures 2/1/8" wide by 3-1/2" tall.
• Hinge is designed to fit industry standard templates.
• Comes complete with gaskets, screws, allen wrench.
• PLEASE NOTE; installation of this hinge requires a cutout in the glass where the hinge is installed.

Weight rating using 3/8" glass; using 2 hinges maximum weight is 80lbs and 28" maximum width. Using 3 hinges maximum weight is 120lbs and 32" maximum width.

Weight rating using 1/2" glass; using 2 hinges maximum weight is 80lbs and 26" maximum width. Using 3 hinges maximum weight is 120lbs and 30" maximum width.

Finishes:

• Bright Chrome
• Brushed Nickel
• Polished Brass
• Oil Rubbed Bronze

• Used for standard glass to glass installation.
• Solid brass drop forged construction.
• Stainless steel reversible hinge pin.
• Opens to 90 degrees
• Hinge pin is reversible which allows it to be set at 0 degrees or 5 degrees. The 5 degree setting holds the door against a stop.
• Springs are hardened stainless steel coil springs.
• Fits tempered glass sizes from 3/8" to 1/2"
• Each leaf measures 2-1/4" wide by 3-1/2" tall.
• Hinge is designed to fit industry standard templates.
• Comes complete with gaskets and allen wrench. Does not include wall mount screws.
• PLEASE NOTE; installation of this hinge requires a cutout in the glass where the hinge is installed.

Weight rating using 3/8" glass; using 2 hinges maximum weight is 80lbs and 28" maximum width. Using 3 hinges maximum weight is 120lbs and 32" maximum width.

Weight rating using 1/2" glass; using 2 hinges maximum weight is 80lbs and 26" maximum width. Using 3 hinges maximum weight is 120lbs and 30" maximum width.

Finishes:

• Bright Chrome
• Brushed Nickel
• Polished Brass