• Replacement casement operator by Truth Hardware.
• Operator arm measures 7-1/2" from pivot point to nylon wheel.
• Operators are "Handed". Model shown to left is the "Right Hand" model.
• Click on link below to see "Left Hand" model.
• Matching screws and matching crank handles are sold separately. Both are offered for purchase during checkout. Order 4 screws per operator.

Finishes:

• White
• Bronze

• Replacement casement operator by Truth Hardware.
• Operator arm measures 9-1/2" from pivot point to nylon wheel.
• Operators are "Handed". Model shown in photo to left is the "Right Hand" model.
• Click on link below to see "Left Hand" model.
• Available in 3 finishes. Model shown to left is "Chestnut" finish.
• Fasteners and crank handles are sold separately. Both are offered for purchase during checkout. Order 4 screws per operator.

Finishes:

• White
• Chestnut
• Bronze

• Replacement casement operator by Truth Hardware.
• Operator arm measures 13-1/2" from pivot point to nylon wheel.
• Operators are "Handed". Model shown in photo to left is the "Right Hand" model.
• Click on link below to see "Left Hand" model.
• Available in 3 finishes. Model shown to left is "Light Bronze" finish.
• Fasteners and crank handles are sold separately. Both are offered for purchase during checkout. Order 4 screws per operator.

Finishes:

• White
• Chestnut
• Bronze

• Replacement crank handle for casement operators made by Truth Hardware.
• Available in 3 finishes, Bronze finish is shown in photo to left.
• Crank handle measures about 4.5" in length
• Made from zinc die cast material.

Finishes:

• White
• Chestnut
• Bronze

• Optional folding handle for Truth Casement operators.
• Handle folds flat to offer a low profile.
• Available in 3 Truth finishes. Handle shown in photo is Bronze finish.
• Handle measures 4-1/4" long.

Finishes:

• Bronze
• Chestnut
• White

• Replaces T-handles for operators made by Truth Hardware.
• Available in 3 finishes
• T-handle measures approximately 2.5" by 7/8".
• Made from die cast metal.

Finishes:

• Chestnut
• Bronze
• White

• Crank handle and plastic cover for Truth 15 series operators and Dyad operators.
• Handle folds flat against cover when not in use.
• This crank handle creates a low profile for installations with limited clearance. For example windows with shutters.
• Fits any of our number 15 series operators (Truth number starts with 15.xx.xx). Also fits any of our Dyad operators by Truth.

Finishes:

• Bronze
• White
• Chestnut

• Replaces operators made by Truth Hardware.
• Available in a Right Hand model (as shown in photo to left) and a Left Hand model (click on link below to view).
• To compare your operator to the one in the photo, crank the spindle until your operator arms match the photo (when the large arm reaches its final stopped position continue turning the crank until the small arm reaches its final stopped position).
• Plastic cover, crank handle and Truth wood screws are sold separately. Covers and crank handles are available in 3 finishes. All 3 items are offered for purchase during checkout. Order from 3 to 5 wood screws per operator.
• Long arm measures approximately 9".
• Short arm measures approximately 8".
• Sash mounting plate measures approximately 2-1/8" by 5".

Finishes:

• Light tan powder coat

• Entry Guard operator made by Truth Hardware.
• Available in Left Hand model as shown in photo and a Right Hand model (click on link to view).
• Plastic cover, crank handles and screws are sold separately. They are available in 3 finishes and are offered for purchase during checkout. Order 4 screws per operator.
• Length of arm is approximately 9".
• Mounting plate measures 5" by 2-1/8".

Finishes:

• Light tan powder coat

• Replacement for dyad casement operator by Truth Hardware.
• Available in Left Hand model (as shown in photo to left) and Right Hand model (click on link below to view).
• Plastic cover, crank handle and Truth wood screws are sold separately. They are available in 3 finishes and are offered for purchase during checkout. Order 4 screws per operator.
• Total length of both arms when fully extended is 7-3/4".
• Mounting plate measures 5" x 2".

Finishes:

• Light tan powder coat

• Plastic cover for Truth casement operators.
• Cover measures approximately 5-1/4" long by 1-1/8" tall and projects about 1-3/8".
• Available in 3 Truth colors. Color shown in photo is Bronze.

Finishes:

• White
• Bronze
• Chestnut

• Casement window lock by Truth Hardware
• This casement window lock fits both single and tandem lock windows. It replaces both the 16.18 and the 16.19 models.
• Available in 3 Truth colors. Color shown in photo is Bronze.
• Measures approximately 2-3/4" wide by 2-1/4" deep (not including lever) by 1" high.
• Screws are not included but are offered for purchase during checkout (2 screws per lock)
• Uses our strike SKU #800154 (not included but offered for purchase during checkout).

Finishes:

• Bronze
• Chestnut
• White

• Replaces awning window operators made by Truth Hardware.
• This awning operator is a "single pull" model.
• Awning operators are not handed.
• Tip to tip measurement of the arms in the widest position (as shown in photo) is 21.5".
• Plate that mounts to sash measures approximately 5" x 2".
• Crank handles and matching screws (uses up to 6 screws per operator) are sold separately and are offered for purchase during checkout.
• Uses our SKU 800108 Sash hook (1 per operator). Offered for purchase during checkout.

Finishes:

• Bronze
• White

• Replaces awning window operators made by Truth Hardware.
• This awning operator is a "dual pull" model.
• Awning operators are not handed.
• Tip to tip measurement of the arms in the widest position (as shown in photo) is 25".
• Plate that mounts to sash measures approximately 5" x 2".
• Uses our SKU 800108 Sash hook (2 per operator). Offered for purchase during checkout.
• Crank handles and matching screws (uses 6 screws per operator) are sold separately and are offered for purchase during checkout.

Finishes:

• Chestnut
• White

• Replaces "Lever type" awning window operators by Truth Hardware.
• Operator is considered "dual pull" because of its two attachment points on the arm.
• Awning operators are not handed.
• Available in bronze or white finishes.
• The tip to tip measurement of the arms in the widest position (as shown in the photo) is 23".
• Base plate measures approximately 4" x 4".
• Matching Truth screws (uses 4 per operator) are not included but are offered for purchase during checkout.
• This product has the "F" escutcheon (2-1/4" deep).
• Uses our SKU 800108 Sash Hook (2 per operator), not included but offered for purchase during checkout.

Finishes:

• Bronze
• White

• Replaces "Lever type" awning window operators by Truth Hardware.
• Operator is considered "single pull" because it has one attachment point on the arm.
• Awning operators are not handed.
• The tip to tip measurement of the arms in the widest position (as shown in the photo) is 20.5".
• Base plate measures approximately 4" x 4".
• Matching Truth screws (uses 2 screws per operator)are not included but are offered for purchase during checkout.
• This product has the "F" escutcheon (2-1/4" deep).
• Uses our SKU 800108 Sash Hook (one per operator). Not included but offered for purchase during checkout.

Finishes:

• Bronze
• White

• Replaces operators for awning windows made by Truth Hardware.
• Awning operators are not handed.
• Available in two sizes. SKU 800060 has two arms. Each arm measures 8-3/4". SKU 800062 has two arms. Each arm measures 12-3/4". Measurements are taken from the end of the arm to the middle of the pivot point.
• The plate that mounts to the sash measures 2-1/8" by 5".
• Each operators uses 3 screws, not included but offered for purchase during checkout. Order our SKU 800231.
• Also available is a plastic cover, available in three finishes. Covers are offered for purchase during checkout.
• Also available is a crank handle, available in three finishes. Crank handles are offered for purchase during checkout.

Finishes:

• Light Tan Powder Coat

• Sash hook is for use with any of our Truth awning operators (series 11 or series 10).
• Sash hook measures 3-1/8" in length.
• Uses 2 each #8 wood screws. Our SKU 800231 which is a #8 x 1" wood screw in the matching finish (light tan) is offered for purchase during checkout.
• Made from steel base material.

Finishes:

• Light tan

• Replacement track for Truth Casement Operators.
• Available in two lengths; 11-3/8" and 13-3/4".
• Made of steel base material.
• Uses our SKU 800231 light tan wood screws (4 each per track). Screws are not included but are offered for purchase during checkout.

Finishes:

• Light Tan Powder Coat

• Cam handle window lock made by Truth Hardware.
• Made from high pressure die cast zinc.
• Available in "Right Hand" and "Left Hand" models.
• For dimensions click on link below.
• Photo to left shows aluminum finish.
• Uses #10 flat head sheet metal screws (not included).

Finishes:

• Satin Aluminum
• Bronze
• White
• Chestnut

• Cam handle lock made by Truth Hardware.
• The hole in the handle allows operation of the cam lock in elevated locations.
• Photo shows Right Hand model.
• Made from high-pressure die-cast material.
• Screws are not included but are offered for purchase during checkout.

Finishes:

• Bronze

• Truth sash lock is designed for use on single and double hung windows.
• Sold as two separate parts; the lock and the strike.
• Made from high pressure, corrosion resistant, die-cast zinc.
• Screws are not included. Uses our SKU 800234. Offered for purchase during checkout.

Finishes:

• White
• Bronze
• Chestnut

• Truth replacement lift for sash windows.
• Base measures 4" by 3/4".
• Screwhole center to center measurement is 3-5/16".
• Projection is 13/16".
• Uses #8 flat head screws (not included but offered for purchase during checkout).

Finishes:

• White
• Bronze
• Chestnut

• Replacement keepers for Truth Hardware window locks.
• These keepers are finished with a light tan powder coating (except SKU 800157 which is zinc plated).
• The length of the mounting plates are as follows;
• SKU 800157 measures 1-3/8".
• SKU 800155 measures 1-3/4".
• SKU 800153 measures 1-3/4".
• SKU 800154 measures 1-5/16".
• To order Truth matching wood screws click on link below.

• Replacement clip for Truth Entryguard Dual Arm Casement Operator and the Truth Entryguard Dyad Dual Arm Casement Operator.
• Made from stainless steel.
• The "clip" attaches the end of one of the operator arms to the stud bracket.
• Measures approximately 1" by 1/2" by 3/16"

• Replacement stud brackets by Truth Hardware.
• Stud brackets are finished with a light tan powdercoating.
• Stud brackets are used in some installations to attach the operator arm to the window.
• Each bracket is available in a Left Hand model and a Right hand model.
• Screws are not included.
• Use Truth casement operator clip (SKU 800354) to attach stud bracket to operator arm (sold separately and offered for purchase during checkout).
• Matching woodscrews with light tan coating are offered for purchase during checkout.

Finishes:

• Light tan powder coating

• Replacement stud brackets by Truth Hardware.
• Finished with a light tan powder coating.
• Stud brackets are used in some installations to attach the operator arm to the window.
• Each bracket is available in a Left Hand model and a Right hand model.Left Hand model is shown in photo.
• Screws are not included.Matching wood screws are offered for purchase during checkout.
• Use Truth casement operator clip (SKU 800354) to attach stud bracket to operator arm (sold separately and offered for purchase during checkout).

Finishes:

• Light tan powder coating

• Heavy gauge steel support arms.
• Stainless steel reinforced shoe.
• Adjustable tension.
• Steel base material.
• Uses #7 x 3/4" flat head stainless screws (not included but offered for purchase during checkout. Order SKU 800340.)
• The quantity of screws required per hinge is listed below. For example for hinge #800308 you should order 16 screws per pair of hinges.

• Heavy gauge stainless steel support arms.
• Stainless steel reinforced shoe.
• Adjustable tension.
• Stainless steel base material.
• Uses #7 x 3/4" flat head stainless screws (not included but offered for purchase during checkout. Order SKU 800340.)
• The quantity of screws required per hinge is listed below. For example for hinge #800318 you should order 20 screws per pair of hinges.

• Smooth gliding delrin shoes.
• Supports windows up to 140 lb.
• 90 degree stop.
• Stainless steel tracks.
• Steel base material.
• The "Arm Length" refers to the length of the arm that pivots and attaches to the window sash.
• Uses #7 x 3/4" flat head stainless screws (not included but offered for purchase during checkout. Order SKU 800340.)
• The quantity of screws required per hinge is listed below. For example for hinge #800235 you should order 16 screws per pair.

• Smooth gliding delrin shoes.
• Support windows up to 140 lb.
• 90 degree stop.
• Stainless steel tracks and base material.
• The "Arm Length" refers to the length of the arm that pivots and attaches to the window sash.
• Uses #7 stainless steel flat head screws (not included but offered for purchase during checkout). One pair of hinges uses 14 screws. Order our SKU #800340 for the #7 x 3/4" stainless steel flat head screw.

• This is the new power window system for Truth window operators which includes the wall control panel. Made for casement windows, awning windows and lightweight skylights (see Truths website for specs on lightweight skylights).
• This kit is suitable for retrofits and for new construction.
• The motor system retrofits onto casement and awning windows and lightweight skylights operated with a hand crank manufactured by Truth Hardware. The motor system drives the same input that the handle is attached to.
• Operate on normal US voltages. Transformer is built in.
• Comes with a rain sensor that automatically closes your window when it rains.
• An optional RF hand held Remote Control Unit is available which can operate an infinite number of Truth motorized windows.
• Comes with a standard wall control panel (operation switch).
• Make sure to order a plastic cover in the color you desire (3 colors are available)
• PLEASE NOTE: There is a separate motor system for "heavy" skylight windows. To order this system please call our office.
• PLEASE NOTE: There is a separate motor system for Pella brand windows. To order this system please call our office.

Finishes:

• White
• Bronze
• Chestnut

• PLEASE NOTE; BOTH THE LC1 AND THE LC2 HAVE BEEN DISCONTINUED BY THE MANUFACTURER. Separate Control Modules are no longer available from the manufacturer (Truth). We are leaving this information on the website for informational purposes only.
• Replacement wall control modules for Truth motorized window systems.
• Available in two models; LC1 and LC2. Model numbers are located on the backside of the module.
• The LC1 model is the basic model for simple opening and closing of the window or skylight. It will control up to 3 windows if motorized locks are not used. Or it will control 1 window if motorized locks are used.
• The LC2 model is configured to allow the windows to be controlled from another building control subsystem (for example a rain sensor or a thermostat). The LC2 model can control one window.
• For more detailed information on these devices see the Truth website. A link is provided below.

Finishes:

• White

• Replacement ball bearing-equiped rollers by Truth Hardware.
• Permanently lubricated ball bearings.
• Available in three models; a stainless steel model and a steel model with steel wheels and a steel model with nylon wheels.
• Uses #8 flat head screws (not included)
• ALTERNATE PART NUMBERS; SKU 800262 may have #31761A marked on the housing. SKU 800259 may have 31895A marked on the housing.

• Replacement ball bearing-equiped rollers by Truth Hardware.
• Permanently lubricated ball bearings
• Made from Stainless steel.
• Uses #8 flat head screws (not included)

• Replacement chain for skylight operators made by Truth Hardware.
• Chain measures 13.5" by 1/2" by 1/4".
• Mounting plate measures 2-1/4" by 1/2".
• Clevis pin is included.
• Steel base material.

• Patio Door lock by Truth Hardware.
• Housing is made of acetyl material.
• Bolt is made from steel.
• Lock bolt sets and releases by pressing buttons with your foot.
• Uses #8 flat head screws (not included but offered for purchase during checkout)

Finishes:

• Bronze
• White

• Truth skylight pole for cranking window and skylight operators which are difficult to reach.
• Pole measures 68.5" long by 15/16" diameter.
• Pole telescopes to approximately 9.5 feet.
• Hook on end of pole works with various Truth loop handles or hex ball drives.
• Pole is made from aluminum tubing with plastic handles and fittings.

• These loop handles are usually used in place of regular crank handles for skylight operators or any window operator that is hard to reach.
• They have an internal spline and set screw which matches the Truth spline.
• For use with Truth skylight poles.
• SKU 800270 incorporates a universal joint so that the operator can be cranked at various angles.
• SKU 800270 measures about 4.25" in length.
• SKU 800267 measures about 2.5" in length.
• Made from high pressure zinc die cast material.

Finishes:

• White

• These two hex ball drive products are made to be used together when you have a Truth skylight or window operator that is hard to reach. SKU 800266 replaces a normal crank handle.
• SKU 800266 has an internal spline and set screw that matches the Truth spline.
• SKU 800265 is built to fit on the end of the Truth Skylight pole (our SKU 800272).
• SKU 800265 is made from steel and is zinc chromate plated.
• SKU 800266 is made from high pressure zinc die cast material and is powder coated white.
• The maximum operating angle is 35 degrees.

• Screws are made to fit Truth brand casement operators and hardware.
• The Light Tan screw matches the finish that Truth uses to coat the less visible parts of many of its products (window track, keepers, operators, etc.)

Finishes:

• White
• Bronze
• Chestnut
• Light Tan
• Solid Stainless Steel