Shutter Hardware & Hinges, Stainless Steel

Shutter Hardware & Hinges, Stainless Steel

This section contains stainless shutter latch, exterior stainless steel shutter hinges and an interior stainless steel shutter hinge.

Stainless Steel Bar Latch

Stainless Steel Bar Latch
  • Bar latch for cabinets and shutters.
  • Made from Type 304 stainless steel.
  • Bar latch measures 3" wide by 2-1/2" tall. Projection is 7/8".
  • Made from 0.112" thick material.
  • Bar latch features a thumbscrew which can be turned to lock down the latch.
  • Stainless steel pan head sheet metal screws are included.

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing

Stainless Steel Connecticut Style Shutter Hinge, Offset

Stainless Steel Connecticut Style Shutter Hinge, Offset
  • Smooth black stainless steel strap with pintle
  • Strap measures 1" by 4-1/4" with either a 2-3/16" offset or a 1-1/4" offset.
  • Pintle is 4-1/2" long by 7/16" diameter thread.
  • Matching black stainless steel wood screws are included
  • Loose joint hinges permit easy hanging and removal of shutters
  • For use where shutters cover windows that are recessed into brick or stone you would normally use the 2-3/16" offset model.
  • For use where shutters cover windows that are recessed into a wood frame you would normally use the 1-1/4"" offset model.
  • Offset of hinge allows shutter to open 180 degrees
  • Made from stainless steel base material
  • This product is sold by the set. A set is 4 hinges, enough to do 2 shutters.
  • If you need a lag anchor for this product for a masonary installation, order our SKU 244130. It is a 1/2" diameter lag anchor (in the long version) but it will work for the 7/16" diameter thread on the pintle.It is offered for purchase during checkout.

Finishes:

  • Smooth black finish
Click here for Information & Pricing

Stainless Steel Connecticut Style Shutter Hinge

Stainless Steel Connecticut Style Shutter Hinge
  • This surface mounted shutter hinge is used where the blind or shutter is flush with the casing. For use in frame or masonry construction.
  • Smooth stainless steel strap with pintle
  • Loose joint hinges permit easy hanging and removal of shutters
  • Made from stainless steel base material
  • This product is sold by the set. A set is 4 hinges, enough to do 2 shutters.
  • Matching black stainless steel screws are included
  • A pair of these shutter hinges is designed to hang a shutter of up to 20lbs. For shutters taller than 60" a third center hinge may be required.
  • For masonry installation use lag type anchors.

Finishes:

  • Smooth black finish
Click here for Information & Pricing