Gate Hinges, Stainless Steel

Gate Hinges, Stainless Steel

This section contains various styles of gate hinges, all made from stainless steel.

Spring Butt Hinges, Stainless Steel

Spring Butt Hinges, Stainless Steel
  • Stainless steel spring butt hinges.
  • Spring tension is adjustable.
  • Screw hole patterns conform to ANSI specifications for template hinges.
  • Pivot point aligns with non-spring hinges of the same size.
  • Screws are included.
  • Photo to left shows hinge with the Bronze finish.
  • PLEASE NOTE: Some of the models have a stainless steel spring and some of the models have a steel spring. The steel spring is coated with laquer which will offer protection but will eventually rust.

Maximum door weight using three spring hinges

  • 4" - 110 lbs.
  • 4-1/2" - 150 lbs.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Stainless Steel Strap Hinge, Wide-Body

Stainless Steel Strap Hinge, Wide-Body
  • Hinge is made from stamped stainless steel
  • Stainless steel is Type 304
  • Polished finish
  • Uses 6 each #10 flat head screws (not included). Flat head stainless steel screws are offered for purchase during checkout.

Finishes:

  • Polished
Click here for Information & Pricing

Heavy Duty T-Hinge, 12" Stainless Steel

Heavy Duty T-Hinge, 12
  • Stainless steel T hinge, recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • Excellent for use anywhere that corrosion is a problem.
  • Heavy duty construction, non-removeable hinge pin.
  • Strap length is measured from the tip of the strap to the far end of the hinge pin barrel.
  • Pad width is measured from the edge of the pad to the inside edge of the hinge pin barrel.
  • Strap width means the widest part of the strap.
  • Hinge is made from Type 316 Stainless. Fasteners are made from Type 305 Stainless.
  • Stainless steel screws are included.
  • This hinge is sold by the "Pair". A pair is 2 hinges, usually what is required to hang one door.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Heavy Duty Bolt-On Hinge, Stainless Steel

Heavy Duty Bolt-On Hinge, Stainless Steel
  • Heavy duty hinge designed to "bolt-on" to the post and "bolt-on" to the gate frame.
  • Made from stainless steel material.
  • Hinge mounting plateis approximately 7" tall by 1.5" wide. Click on link below for detailed dimensions.
  • Hinge construction
    • Made from stainless steel.
    • Roller bearing construction
    • Includes grease fitting for lubrication
    • Click on link below for more information on how these hinges are constructed
    • PLEASE NOTE: THE FOLLOWING PARTS ON THIS HINGE ARE MADE FROM STEEL (NOT STAINLESS STEEL)
      • The grease fitting (Zerc Fitting) on this hinge is not stainless steel it is zinc plated steel. All other parts are stainless steel.
      • The bolt and nut that act as the pivot point of the hinge. They are both zinc plated.
  • Maximum weight rating of 1000 lbs per pair of hinges.
  • Fasteners
    • Fasteners are not included.
    • To acheive the above weight ratings, stainless steel boltsmust be used for attachment.
    • We do not stockstainless steel bolts, they must be purchased from an alternate source.
    • Uses 1/2" diameter bolts.
  • This hinge is sold by the "Each". You will normally need to order 2 or more hinges per gate or door that you are hanging.
Click here for Information & Pricing

Stainless Steel Strap Hinge, Heavy Duty

Stainless Steel Strap Hinge, Heavy Duty
  • Excellent for use anywhere corrosion is a problem or the look of stainless steel is desired.
  • Stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • Made from solid stainless steel (Type 304)
  • Stainless steel screws are included.
  • PLEASE NOTE: The "Size" refers to the length of one hinge leaf. The "Size Open" dimension is the tip-to-tip measurement when the hinge is in the open position as shown in the photo.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Heavy Duty T-Hinge, Stainless Steel

Heavy Duty T-Hinge, Stainless Steel
  • Stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • Excellent for use anywhere corrosion is a problem or the look of stainless steel is desired.
  • Heavy duty construction.
  • Made from solid stainless steel (Type 304)
  • Strap length is measured from the tip of the strap to the far end of the hinge pin barrel.
  • Pad width is measured from the edge of the pad to the inside edge of the hinge pin barrel.
  • Strap width means widest part of strap.
  • Stainless steel screws are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Tee Hinge, Stainless Steel

Tee Hinge, Stainless Steel
  • Stainless steel hinge for use near marine environments or anywhere the look of stainless steel is desired.
  • Stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • Hinge measures approximately 4.25" tall by 5" wide.
  • Short leaf is 1-9/16" wide. Long leaf is 3-3/8" wide.
  • Stainless steel fasteners are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing