Strap Hinges, Stainless Steel

Strap Hinges, Stainless Steel

Strap hinges made from solid stainless steel.

Lift Off Strap Hinge, Stainless Steel, Heavy Duty

Lift Off Strap Hinge, Stainless Steel, Heavy Duty
  • Stainless steel strap hinge is meant for use with cedar, redwood, vinyl or ACQ (treated) lumber.
  • Also for use in corrosive environments or where the look of stainless steel is desired.
  • Heavy duty strap hinge. Door or gate can be lifted off after installation.
  • Made from solid stainless steel material (0.156" thickness).
  • Vertical mounting plate measures 2" wide by 6.5" tall.
  • Stainless steel wood screws are included. Also included are 1/2" x 4" stainless steel carriage bolts (one per hinge). Carriage bolts install in the square hole as a through bolt.
  • Hinge is made from Type 316 Stainless. Fasteners are made from Type 305 Stainless.
  • These hinges are sold by the pair. A pair is two hinges.
Click here for Information & Pricing

Heavy Duty Stainless Steel Strap Hinge

Heavy Duty Stainless Steel Strap Hinge
  • Heavy duty strap hinge for gates, truck doors or anywhere a heavy duty stainless steel strap hinge is needed.
  • Made for surface mounted flush installation.
  • Made from 0.197" thick stainless steel.
  • Horizontal strap measures 2.5" tall by 7-3/8" wide (measured from center of hinge pin).
  • Vertical strap measures 4-1/8" tall by 2-1/4" wide (measured from center of hinge pin).
  • Hinge pin is removable (held in place by a circlip). Hinge pin features a zerk fitting to allow lubrication.
  • Each hinge uses 6 each 5/16" lag screws (not included but offered for purchase during checkout).

Finishes:

  • Polished Stainless
Click here for Information & Pricing

3-1/2" Stainless Steel Strap Hinge

3-1/2
  • Beautifully polished stainless steel strap hinge, made from Type 304 stainless steel.
  • Horizontal strap measures 3.5" from center of hinge pin to end of strap.
  • Vertical strap measures 2-1/4" tall by 1-3/8" from center of hinge pin to edge of strap.
  • Thickness is 0.135".
  • Hinge is designed for flush installation (surface mounted).
  • Each hinge uses 4 each #14 pan head screws (not included but offered for purchase during checkout).

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing

3-1/8" Stainless Steel Strap Hinge

3-1/8
  • Stainless steel strap hinge made for surface mounted installations.
  • Hinge measures 3-1/8" tall by 5" wide.
  • Made from type 304 stainless steel.
  • Each hinge uses 4 each #14 pan head screws (not included but offered for purchase during checkout).

Finishes:

  • Natural Stainless Steel
Click here for Information & Pricing

Stainless Flush Hatch Door Hinge

Stainless Flush Hatch Door Hinge
  • 2-7/8" open
  • 1-1/2" wide
  • 304 stainless steel
  • uses #6 flat head screws (not included)

Finishes:

  • Polished
Click here for Information & Pricing

Marine Ladder Hinge, Stainless Steel

Marine Ladder Hinge, Stainless Steel
  • Hinge is designed as a hinge for boat ladders.
  • May be used anywhere a long hinge with a strong hinge knuckle is needed.
  • Hinge is 6-3/4" long by 3/4" wide by 3/16" thick.
  • Hinge knuckle is 1/2" diameter.
  • Uses #10 flat head screws, not included but offered for purchase during checkout.

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing

Stainless Steel Strap Hinge, Flush Mount

Stainless Steel Strap Hinge, Flush Mount
  • Hinge is made from stamped stainless steel.
  • Stainless steel is Type 304.
  • To install this hinge you should mortise the wood to accept the hinge knuckle
  • Polished finish
  • 1/16" materialthickness
  • Uses 6 each #8 flat head screws (not included). Flat head stainless steel screws are offered for purchase during checkout.

Finishes:

  • Polished
Click here for Information & Pricing

Stainless Steel Strap Hinge, Wide-Body

Stainless Steel Strap Hinge, Wide-Body
  • Hinge is made from stamped stainless steel
  • Stainless steel is Type 304
  • Polished finish
  • Uses 6 each #10 flat head screws (not included). Flat head stainless steel screws are offered for purchase during checkout.

Finishes:

  • Polished
Click here for Information & Pricing

Stainless Steel Strap Hinge Heavy Duty

Stainless Steel Strap Hinge Heavy Duty
  • Hinge is made from stamped stainless steel
  • Stainless steel is Type 304
  • Polished finish
  • Uses 8 each #8 flat head screws (not included). Flat head stainless steel screws are offered for purchase during checkout.

Finishes:

  • Polished
Click here for Information & Pricing

Stainless Steel Strap Hinge -

Stainless Steel Strap Hinge -
  • Made from stamped stainless steel.
  • Stainless steel is type 304.
  • Polished finish
  • Use #8 flat head screws (not included). Flat head stainless steel screws are offered for purchase during checkout.
  • The 4" hinge uses 4 screws
  • the 6" hinge uses 6 screws

Finishes:

  • Polished
Click here for Information & Pricing

Stainless Steel Strap Hinge-

Stainless Steel Strap Hinge-
  • Hinge is stamped stainless steel.
  • Made from Type 304 stainless steel.
  • Polished finish
  • Uses 6 each #8 flat head screws (not included). Flat head stainless steel screws are offered for purchase during checkout.

Finishes:

  • Polished
Click here for Information & Pricing

Stainless Steel Short-Side Hinge

Stainless Steel Short-Side Hinge
  • type 304 stamped stainless steel
  • small plate measures 3/4" x 1-1/2"
  • large plate measures 1-1/2" x 1-1/2"
  • light duty utility hinge
  • uses #6 flat head screws (not included)

Finishes:

  • Polished
Click here for Information & Pricing

Stainless Steel Strap Hinge

Stainless Steel Strap Hinge
  • Hinge is stamped stainless steel.
  • Made from Type 304 stainless steel
  • Polished finish
  • Uses 6 each #8 flat head screws (not included). Stainless steel flat head screws are offered for purchase during checkout.
  • Both sizes use 6 screws per hinge

Finishes:

  • Polished
Click here for Information & Pricing

Stainless Steel Short Side Strap Hinge

Stainless Steel Short Side Strap Hinge
  • Stamped stainless steel hinge.
  • Made from Type 304 stainless steel.
  • Polished finish
  • Short leaf measures 1-3/8". Wide leaf measures 2-5/8".
  • Uses 5 each #8 flat head screws (not included). Stainless steel flat head screws are offered for purchase during checkout.

Finishes:

  • Polished
Click here for Information & Pricing

Stainless Steel Strap Hinge, Heavy Duty

Stainless Steel Strap Hinge, Heavy Duty
  • Excellent for use anywhere corrosion is a problem or the look of stainless steel is desired.
  • Stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • Made from solid stainless steel (Type 304)
  • Stainless steel screws are included.
  • PLEASE NOTE: The "Size" refers to the length of one hinge leaf. The "Size Open" dimension is the tip-to-tip measurement when the hinge is in the open position as shown in the photo.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing