Sugatsune Specialty Hinges and Hardware

Sugatsune Specialty Hinges and Hardware

Sugatsune offers a wide range of hinges and hardware for multiple applications. In this section you can find weld-on hinges, lid supports, double acting hinges and more.

Stainless Steel Weld-On Hinge, 6" Flag

Stainless Steel Weld-On Hinge, 6
  • Stainless steel flag hinge for welding.
  • Made from type 304 stainless steel.
  • Hinge is 6" tall by 2.5" wide. Click on link below for more dimensions.
  • Hinge pin is fixed in bottom leaf. Top leaf will "lift off" bottom leaf.
  • Top leaf rides on a ball bearing fixed to the top of the hinge pin.
  • A pair of these hinges has a weight rating of 198 lbs.
  • These hinges are available in either a Left Hand or Right Hand model as shown in photo.
  • These hinges are sold by the "each". You would normally order 2 hinges per door you are hinging.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Stainless Steel Weld-On Hinge, 4" Flag

Stainless Steel Weld-On Hinge, 4
  • Stainless steel flag hinge for welding.
  • Made from type 304 stainless steel.
  • Hinge is 4" tall by 2.5" wide. Click on link below for more dimensions.
  • Hinge pin is fixed in bottom leaf. Top leaf will "lift off" bottom leaf.
  • Top leaf rides on a ball bearing fixed to the top of the hinge pin.
  • A pair of these hinges has a weight rating of 88 lbs.
  • These hinges are available in either a Left Hand or Right Hand model as shown in photo.
  • These hinges are sold by the "each". You would normally order 2 hinges per door you are hinging.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Lid Support, Stainless Steel

Lid Support, Stainless Steel
  • Lid Stay or Support for boxes, cedar chests, blanket chests, etc.
  • This lid support assists in the lifting of your lid and it will hold the lid in the "up" position.
  • PLEASE NOTE: this lid support does not "dampen" the closing action of the lid so it is not recommended for children's toy boxes.
  • Made from stainless steel and nylon with a stainless steel spring.
  • Available in 3 different mounting styles (all models mount on inside of box)
    • Right Side Mount (mounts on underside of lid and right side panel of box)
    • Left Side Mount (mounts on underside of lid and left side panel of box)
    • Back Wall Mount (mounts on underside of lid and back wall of box)
  • Available in two different weight ratings (use formula information below to calculate your lid "moment")
    • 26 inch/pounds (in/lbs) maximum lid moment
    • 34 inch/pounds (in/lbs) maximum lid moment
  • Click on PDF link below for product dimensions and exact installation locations. Dimensions are in millimeters.
  • Important information about the hinge location and back wall thickness of your box. For this lid support to work correctly, the back wall of your box must be 3/4" thick and the pivot point of your hinge (where the hinge pin is) must be located on the outside back wall of the box. See PDF link for more information. Normally, you would use a piano hinge or several butt hinges to hinge your lid.
  • The formula for the weight rating is: Lid Front to back dimension (in inches) times Lid Weight in pounds divided by 2 equals the lid "moment".
  • More than one lid support can be used for heavier lids, up to 3 supports per lid. Do not mix lid supports of different weight ratings when using more than support.
  • Do the calculation using the formula and choose the lid support that most closely matches the "moment" of your lid. Do not exceed the maximum rating value.
  • IMPORTANT:
    • Screws are not included and must be ordered separately. Order 4 each #8 pan head stainless steel screws per lid support. The are offered for purchase during checkout.
    • Instructions are not included. Please print out the PDF file so that when your supports are delivered you will have instructions.
Click here for Information & Pricing

1-3/4" Stainless Steel Quick Release Hinge

1-3/4
  • "Quick Release" hinge features a hinge pin release mechanism that allows door or lid to be easily removed.
  • Hinge pin is spring loaded to keep the door or lid safely locked on to the cabinet or box.
  • To remove the door or lid, the hinge pin may be retracted by pushing the knurled knob down and pivoting it into the unlocked position.
  • Hinge is designed to be surface mounted.
  • Hinge measures approximately 1-3/4" tall and 2" wide in the open position.
  • Made from solid stainless steel.
  • Uses #6 pan head screws (4 screws per hinge), not included, but offered for purchase during checkout.
  • PLEASE NOTE: These hinges are handed (Right Hand or Left Hand). Make sure to order one Right Hand AND one Left Hand hinge for each door or lid you are hanging. The image shown to the left is a "Right Hand" model.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Lift Assist for Bar and Countertop Openings

Lift Assist for Bar and Countertop Openings
  • For Lift-up openings in bars and countertops (bar and countertop vertical doors)
  • Assists the lifting and dampens the closing of the countertop door
  • Creates a smooth and soft closing action, prevents door from slamming shut
  • Can be easily installed on an existing door
  • Click on links below to view:
    • Dimensional diagram
    • Installed example
    • Installation Instructions PDF
    • Video
  • Attachment screws are included
  • IMPORTANT, PLEASE NOTE THE FOLLOWING:
    • For this product to work properly, you must carefully calculate the inch/pound closing force of your countertop door
    • Once you know the inch/pound rating of your countertop door, you can choose one of the three devices that has an inch/pound rating that matches your countertop door.
    • For this product to work properly, your countertop door must be hinged with one of the following hinge types:
      • butt type hinges
      • piano hinge
      • Soss concealed hinges
    • Works only on door thicknesses of from 19/32" to 63/64".
    • Please see the installation examples to see how your door should be hinged.
  • CALCULATION OF INCH/POUND RATING
    • Weight of door (in pounds) times length of door (in inches) times 1/2 (W x L x 1/2 = Inch/Pound Rating)
    • Length of door is the horizontal distance from the hinged side of the door to its opposite end.
    • For example, if you have a countertop door that is 30 inches long by 18 inches wide and it weighs 8 pounds, multiply 30 times 8 and divide by 2 (30 x 8 divided by 2 =120 inch/pounds)
  • WEIGHT RATINGS
    • For doors rating at from 70 to 93 Inch/pounds use our SKU 658954
    • For doors rating at from 93 to 120 Inch/pounds use our SKU 658956
    • For doors rating at from 120 to 141 Inch/pounds use our SKU 658958
Click here for Information & Pricing

Plastic Hinge with Stops

Plastic Hinge with Stops
  • Hinge measures 2" high by 2-3/8 wide (open)
  • Hinge thickness is 5/16"
  • Diameter of hinge barrel is 5/8"
  • Hinge has 4 positive stops or detents (0 degrees, 90 degrees, 180 degrees, and 270 degrees)
  • Uses #6 round head screws (not included)
  • Base material is plastic with a stainless steel pin.

Finishes:

  • Black Plastic
Click here for Information & Pricing

Gate Bolt, Stainless Steel

Gate Bolt, Stainless Steel
  • Stainless steel bolt is very high quality and secures gates and garage doors.
  • Rust resistant stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
  • Available in three sizes; Large measures 5-1/4" by 2-3/4". Small measures 4" by 2-1/4". Mini measures 2-3/4" by 1-1/2".
  • Two different strike plates are included. The strike can either be surface mounted or edge mounted.
  • Includes stainless steel screws.
  • Bolt can be locked in either the open position or the closed position with a padlock.
  • The bolt on the "small" size is .350" in diameter. The bolt on the "large" size is .475" in diameter. The bolt on the "mini" size is .250".

Finishes:

  • Stainless Steel
Click here for Information & Pricing

Barrel Bolt, Satin Stainless Steel

Barrel Bolt, Satin Stainless Steel
  • Stainless steel barrel bolt has a satin stainless steel finish.
  • Width is 1-1/16", length is 7.5". Projection is 5/8".
  • Made from Type 304 stainless steel. Slide bolt and knob are made from brass and nickel plated.
  • Comes with two keepers. One keeper is for surface mounting the other keeper is for edge mounting.
  • Stainless steel flat head screws are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Hasp, Stainless Steel

Hasp, Stainless Steel
  • Stainless steel hasp accepts padlock for locking gates, boxes, chests, doors, cabinets, etc.
  • Made from Type 304 stainless steel.
  • Available in 4 sizes; Large, Medium, Small and Extra Small.
  • Stainless steel screws are included.
  • Padlock eye rotates 360 degrees. When a padlock is attached the padlock eye is held in the vertical position (via gravity) to help secure the hasp.

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing

Reversible Flap Stay

Reversible Flap Stay
  • Drop stay gently lowers and holds drop down desk surfaces and flaps.
  • Reversible, can be installed on left or right hand side.
  • Length is approximately 9". For detailed dimensions, click on link below.
  • This product is meant to be used with separate hinges.
  • Click on the link below to see what flap sizes this product will support.
  • Screws are included.

Finishes:

  • Nickel plated steel, black plastic
Click here for Information & Pricing

Stainless Steel Bar Latch

Stainless Steel Bar Latch
  • Bar latch for cabinets and shutters.
  • Made from Type 304 stainless steel.
  • Bar latch measures 3" wide by 2-1/2" tall. Projection is 7/8".
  • Made from 0.112" thick material.
  • Bar latch features a thumbscrew which can be turned to lock down the latch.
  • Stainless steel pan head sheet metal screws are included.

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing

Stainless Steel Latch, Slide Bar Type

Stainless Steel Latch, Slide Bar Type
  • Slide bar latch for cabinet doors.
  • Made from Type 304 stainless steel.
  • Latch measures 2-5/8" by 1-1/2" with a projection of 1-1/16".
  • Comes with two different strike plates, a surface mounted strike (1/2" by 1-1/2") and an edge mount strike (3/4" by 1-1/2")
  • Latch features a spring loaded slide bar. The spring holds the slide bar in place if mounted vertically.
  • Wood screws are included.

Finishes:

  • Stainless Steel
Click here for Information & Pricing

Stainless Steel Slide Bolt

Stainless Steel Slide Bolt
  • Slide bar latch for cabinet doors.
  • Made from Type 304 stainless steel.
  • Latch measures 2-1/4" by 1-3/16" with a projection of 3/4".
  • Comes with two different strike plates, a surface mounted strike (1/2" by 1-3/16") and an edge mount strike (5/8" by 1-3/16")
  • Latch features a spring loaded slide bar. The spring holds the slide bar in place if mounted vertically.
  • Wood screws are included.
  • PLEASE NOTE; the square bolt on this product is made from solid brass and is plated with satin nickel to match the stainless steel finish. All other parts are made from stainless steel.

Finishes:

  • Stainless steel
Click here for Information & Pricing

Heavy Duty Soft-Close Bench Seat Stay

Heavy Duty Soft-Close Bench Seat Stay
  • Heavy duty soft-down lid stay
  • For toy boxes, bench seat lids, etc.
  • Holds door open 70 degrees from horizontal.
  • May be used on both overlay lids and inset installed lids (click on links below for install pages)
  • This product is used with hinges (ordered separately)
    • Hinges are ordered separately
    • Works with butt hinges, piano hinges and concealed European style hinges
    • See install pages below for installation information on these different types of hinges
    • For a lid thickness and box wall thickness of 3/4" on an "inset" lid you can use the following:
      • Hinges, use our SKU 701154
      • Mounting plates, use our SKU 652296
      • Screws, use our SKU 652360 (two screws per hinge and two screws per mounting plate)
      • Use a 3/16" (5 mm) bore distance and it will give you a 2 mm reveal or gap between the lid edge and side panel
      • The bore distance is the distance from the edge of the lid to the edge of the 35 mm hinge hole
    • For a lid thickness and box wall thickness of 3/4" on an "overlay" lid you can use the following;
      • Hinges our SKU 701152
      • Mounting plates, our SKU 652296
      • Screws, our SKU 652360 (two screws per hinge and two screws per mounting plate)
      • Use a 5/16" or 8 mm bore distance to achieve a full overlay of the 3/4" thick box wall.
      • The bore distance is the distance from the edge of the lid to the edge of the 35mm hinge hole
  • Available in 3 weight rated sizes
    • Light Duty
    • Medium Duty
    • Heavy Duty
  • Weight Calculation (Torque)
    • Door Height (DH) is the front-to-back (or height) measurement of the lid in inches (for example 24.5")
    • Door Weight (DW) is in measured in pounds (lbs) (for example 10.3 lbs)
    • The formula is DH x DW x 1/2 = Inch/Pounds
    • Match your result with the following;
      • Pair of Light Duty Stays (121 to 173 Inch/Pounds)
      • Pair of Medium Duty Stays (173 to 216 Inch/Pounds)
      • Pair of Heavy Duty Stays (216 to 260 Inch/Pounds)
    • Using our example measurements 24.5 x 10.3 x 1/2 = 126.18 Inch/Pounds
    • For 126.18 Inch/Pounds you would use a pair (one Left Hand and one Right Hand) of the Light Duty Stays
  • IMPORTANT INFORMATION, PLEASE READ BEFORE ORDERING
    • Sold by the each but designed to be installed in "pairs"
    • Make sure to order one Left Hand model AND one Right Hand model
    • Make sure to do the weight calculation before ordering
    • All weight calculation results are based on using two stays per lid (a Left Hand and a Right Hand)
    • Fasteners are included
Click here for Information & Pricing