Sugatsune Door Hinges and Hardware

Sugatsune Door Hinges and Hardware

With a strong emphasis on design and function, Sugatsune has developed specialty hinges for residential use.

Stainless Steel Hinge, 3 Knuckle, Type 316

Stainless Steel Hinge, 3 Knuckle, Type 316
  • Heavy duty stainless steel butt hinge made from Type 316 Stainless Steel. Type 316 Stainless Steel is a high grade stainless steel, also known as Marine Grade Stainless Steel.
  • Three knuckle construction.
  • This hinge is meant to be surface mounted rather than installed as a full mortise butt hinge.
  • All hinges use flat head screws. The screw size is listed below. Screws are not included but are offered for purchase during checkout. Screws offered at checkout are Type 304 stainless.

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing

Stainless Steel Butt Hinge, 3-7/8", Type 316

Stainless Steel Butt Hinge, 3-7/8
  • Heavy duty stainless steel butt hinge, made from Type 316 stainless steel.
  • Type 316 stainless steel is a high grade stainless steel, also known as marine grade stainless.
  • Hinge is produced by casting and the hinge pin is not removable.
  • Actual measurement of hinge is 3-7/8" tall by 3-7/8" wide. The hinge thickness is 1/4".
  • This hinge is meant to be surface mounted rather than installed as a full mortise butt hinge.
  • Uses #14 flat head screws. Screws are not included but are offered for purchase during checkout. Screws offered at checkout are Type 304 stainless.

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing

Large Stainless Steel Flag Hinges

Large Stainless Steel Flag Hinges
  • No mortise style hinge. Hinge installs as a normal full mortise butt hinge but no mortising is required.
  • Leaves only a 1/8" gap after installation.
  • Top leaf rides on a ball bearing located on the top of the hinge pin.
  • Hinge is not handed, may be used on left or right opening doors.
  • Hinge shown in photo is shown in the "door open" position.
  • Hinge is a lift off hinge, door may be lifted off after hinge is installed without removing any screws.
  • Made from solid type 304 stainless steel.
  • Available in two sizes, a 4" high hinge and a 5" high hinge.
  • The 4" hinge leaf is 1-5/8" wide not including the hinge barrel. The hinge barrel diameter is 5/8".
  • The 5" hinge leaf is 1-3/8" wide not including the hinge barrel. The hinge barrel diameter is 3/4".
  • Weight ratings listed below are for a pair of hinges.
  • Stainless steel flat head screws are included.

Finishes:

  • Satin Stainless Steel
Click here for Information & Pricing

Magnetic Door Holder, Polycarbonate

Magnetic Door Holder, Polycarbonate
  • Magnetic door holder will hold the door in the open position until it is pulled closed.
  • Features a powerful magnet which has a 30lb pull.
  • Door holder is made up of two pieces; a door plate and a magnetic upright.
  • The door plate attaches to the back of the door. It is approximately 2" in diameter and projects 3/4".
  • The magnetic upright may be attached to either the floor in a vertical position or to the wall in a horizontal position. The magnetic upright measures 3" tall. Its baseplate is 2-1/8" in diameter.
  • This product is made from a very strong polycarbonate material. The magnet has a plated steel holder and receiver.
  • Mounting screws are included.

Finishes:

  • Brown
  • Ivory
Click here for Information & Pricing

Magnetic Door Holder, Small

Magnetic Door Holder, Small
  • Magnetic door holder will hold the door in the open position until it is pulled closed.
  • Features a magnet with an 18lb pull.
  • Door holder is made of two pieces; a door plate and a magnetic upright.
  • The door plate attaches to the back of the door. It measures 1-7/8" by 1-5/8" and projects 7/16".
  • The magnetic upright may be attached to either the floor in a vertical position or to the wall in a horizontal position. It measures 2-5/8" tall. Its base plate is approximately 1-3/4" by 2".
  • Product is made from plastic. The magnet is held in place by a steel holder and the wall plate has a steel plate to attract the magnet.
  • Mounting screws are included.

Finishes:

  • Brown
  • Ivory
Click here for Information & Pricing