Sugatsune Veritcal Door Stays

Sugatsune Veritcal Door Stays

Add a touch of sophistication with a soft closing system or lid stay. Sugatsune offers a patented Lapcon technology, Vertical Door Stay for soft close cabinet doors.  Lapcon Technology reduces unwanted noise as well as the chance for injury. 

Vertical Swing Lift-Up Mechanism

Vertical Swing Lift-Up Mechanism
  • Unique mechanism will help lift doors and hold at the open position.
  • Sleek & compact design.
  • Easy installation.
  • Adjustable arm mounting plate.
  • Patented LAPCON technology provides a smooth and quiet motion.
  • Successfully passed 30,000 open/close private cycle test.
  • Vertical Swing Lift-Up Mechanism for Cabinet Doors.
  • This product is for "Frameless" type cabinets with overlay type doors. It may be installed on a "Face Frame" cabinet but the installer must "block out" behind the cabinet face frame.
  • For door widths between 600 and 900 mm (23-5/8" to 35-7/16")
  • For door heights between 390 and 450 mm (15-23/64" to 17-23/32")
  • Available in 3 different sizes
    • SKU 658928 is for a door that weighs between 5.5 and 7.7 lbs
    • SKU 658930 is for a door that weighs between 7.9 and 9.9 lbs
    • SKU 658932 is for a door that weighs between 10.1 and 11.4 lbs
  • Click on links below for more information on this product.
  • Made from Nickel Plated steel with some grey plastic parts
  • Product includes:
    • Left and right side mechanisms
    • Dampers to soften final closing action
    • Guide bar which installs on the inside of the door and connects the two mechanisms (guide bar needs to be cut by the installer or end user prior to installation)
    • Printed installation instructions
  • This product is sold by the "Set". A "Set" is what is needed to hang one door.
Click here for Information & Pricing

Soft Down Stay for Vertical Doors

Soft Down Stay for Vertical Doors
  • Soft Down Stay for vertical cabinet doors.
  • A vertical cabinet door is one which is hinged at the top and opens from the bottom.
  • This soft down stay holds the door when it is in the open position and allows the door to gently close when pulled shut.
  • This product can only be used on frameless cabinets, not for face frame cabinets.
  • Can be used on the following door types:
    • an overlay door that is hinged with a European hinge on a frameless cabinet.
      • For this installation typeuse our SKU 652020 with mounting plate SKU 652301.
      • If you drill a 3/16" bore distance this will give you a door with a 1/2" overlay.
      • Bore distance is the distance from the edge of the door to the edge of the 35mm cup drilled in the back of the door.
      • This hinge is offered for purchase during checkout.
    • an inset door that is hinged with a European hinge on a frameless cabinet (as shown in the video)
      • For this hinge use our hinge SKU 652022
      • And use mounting plate SKU 652296
    • an inset door that is hinged with a piano or butt type hinge
    • an overlay door that is hinged with a piano or butt type hinge
  • Available in two model colors: black or white.
  • Stay is reversible, may be used on either the left hand or right hand side of the cabinet.
  • Mounting screws are included with purchase.
  • PLEASE NOTE: this product requires hinges to be installed on the door (either European hinges, piano hinge or butt hinges). Hinges are not included and must be ordered separately. The European hinge, the doorand the cabinet shownin the photoare not included.
  • PLEASE NOTE: before ordering check the weight chart at the link below. Your door weight must be between the minimum and the maximum weights shown for its corresponding door height. The chart is for 2 stays on a door. If one stay is used, divide the minimum and maximum weights by 2.
  • PLEASE NOTE: this product is sold by the each. In many cases, you will need to order 2 stays per door. Again consult the weight chart.
Click here for Information & Pricing