Sugatsune Glass Door Hinges

Sugatsune Glass Door Hinges

Sugatsune offers a wide selection of high quality glass door hinges for furniture and cabinet doors.

Stainless Steel 3/8" Overlay Glass Door Hinge

Stainless Steel 3/8
  • Glass door hinge for overlay doors.
  • Stainless steel base material with an aluminum cap screw.
  • Free swinging.
  • Uses #4 flat head wood screws (not included but offered for purchase during checkout.) Order 3 screws per hinge.
  • Overlay dimension is 3/8".
  • Requires a 7mm hole drilled in the glass.
  • Maximum door weight is 8.8 lbs per pair of hinges.
  • For glass thicknesses of 4mm (5/32"), 5mm (3/16") and 6mm (15/64")

Finishes:

  • Stainless Steel
Click here for Information & Pricing

Inset Glass Door Hinge

Inset Glass Door Hinge
  • Glass door hinge for inset doors
  • Requires a 7mm hole drilled in the glass
  • Free swinging
  • For glass thicknesses of 4mm (5/32"), 5mm (3/16"), and 6mm (15/64")
  • Maximum door weight for a pair of hinges is 8.8 lbs
  • Maximum door size is 17-3/4" wide by 27-1/2" high per pair of hinges
  • Uses #4 flat head wood screws (not included but offered for purchase during checkout) Order 3 each screws per hinge.
  • Made from steel base material.

Finishes:

  • Polished Chrome
  • Polished Brass
Click here for Information & Pricing

Glass Door Overlay Hinge, Bore Type

Glass Door Overlay Hinge, Bore Type
  • Glass door hinge for cabinets without a face frame.
  • Hinge overlays side panel.
  • Hinge requires small hole bored in glass to install
  • Steel base material. Snap catch is made from nylon.
  • Uses #4 flat head screws not included but offered for purchase during checkout. (for side panel attachment). Order 3 each screws per hinge.
  • Fasteners to attach hinge to glass are included.
  • Hinge features built in nylon snap catch to hold door in closed position.
  • Hinge shown in photo is chrome hinge. Hinge is show in 1/2 open position.

Finishes:

  • Chrome
  • Polished Brass
  • Flat Black
Click here for Information & Pricing

Glass Door Hinge, Stainless Steel, Non-Bore Inset

Glass Door Hinge, Stainless Steel, Non-Bore Inset
  • Glass door hinge for inset applications
  • Fits glass thickness of 4 to 8 mm (5/32" to 5/16").
  • Hinge clamps to glass so no boring of glass is required. Clamp screws are included.
  • Type 304 stainless steel.
  • Maximum door size is 23-5/8" high by 15-3/4"wide.
  • Hinge measures approximately 1" high by 1-1/4" wide by 3/4" thick. See dimensional diagram for actual measurements.
  • Flat head wood screws are included.

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing

Inset Glass Door Hinge, Bore Type

Inset Glass Door Hinge, Bore Type
  • Inset type glass door hinge.
  • Requires two holes (approximately 3/8") bored in glass to install.
  • Hinge measures approximately 1-7/8" tall.
  • Leaf that attaches to glass is about 1-3/8" wide.
  • Leaf that attaches to side panel is about 2" wide.
  • Screws to attach hinge to side panel are not included (uses #6 Pan Head, stainless steel screws are offered for purchase during checkout). All other fasteners are included.
  • The hinge body is polished stainless steel (type 304). The fixing plate (attaches to front of glass) is made from zinc allow and is polished chrome plated.
  • For glass thicknesses from 3/16" to 5/16".
  • For glass doors up to 26 lbs and 25.5" wide (per pair of hinges).

Finishes:

  • Polished Chrome and Polished Stainless Steel
Click here for Information & Pricing

Large Inset Non-Bore Glass Hinge

Large Inset Non-Bore Glass Hinge
  • Glass door hinge for inset doors. No boring of glass is required.
  • Made from Type 304 stainless steel.
  • For glass doors 5/32" to 5/16" thick and up to 51" tall and 17-3/4" wide.
  • Screws are included.
  • Hinge measures approximately 2-3/8" tall and 1-1/4" wide and 3/4" thick.
  • For exact dimension click on link below.

Finishes:

  • Polished Stainless Steel
Click here for Information & Pricing