Loose Joint Hinges

Loose Joint Hinges

  • Loose joint hinges allow the door to be easily lifted off of the cabinet.
  • There are 28 different hinges in this section.

Take-Apart Hinge, Steel

Take-Apart Hinge, Steel
  • Hinge lifts apart so lid or door may be easily removed.
  • Steel base material.
  • Joint length is 1-5/16".
  • Open width is 1-5/16".
  • Uses #4 pan head screws (not included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

  • Nickel Plated
Click here for Information & Pricing

1-3/4" Economy Lift Off Hinge

1-3/4
  • Our lowest priced lift-off hinge.
  • Hinges feature a loose joint so that door may be easily removed after installation.
  • Height is 1-3/4", width is 1-9/16".
  • Hinge is made from steel and brass plated.
  • Wood screws are included.
  • This hinge is only available as shown, not handed. See link below for view of separated hinge.
  • Sold by the pair. A pair is normally what you need to hang one door.
Click here for Information & Pricing

Stainless Steel Take-Apart Hinge

Stainless Steel Take-Apart Hinge
  • Unique take-apart or lift-off hinge
  • Take-apart or lift-off hinges allow the door or lid to be removed without having to remove the fasteners
  • Made from investment cast 316 stainless steel
  • Features tab on hinge barrel which keeps the door or lid from lifting off unless the door is in the fully open position
  • Hinge can be used on a box lid or door (see important door usage information below)
  • Hinge is meant to be used as a "surface mounted" hinge
  • Hinge is approximately 1.5" tall and 3.5" wide when measured with the hinge leafs open
  • Hinge is sold by the each. You will normally order 2 hinges per door or lid.
  • Each hinge uses 4 each #10 flat head screws, not included but offered for purchase during checkout.

Information regarding use of this hinge on a door

  • This hinge is only available in one model, a left hand hinge
  • If used as a door hinge, it can only be used on a door which is hinged on the left side of the cabinet.
  • If you are standing in front of the cabinet door, the door will be hinged on the left side.
  • It will not work on a door that is hinged on the right side.

Click here for Information & Pricing

Steel Take-Apart Hinge

Steel Take-Apart Hinge
  • Steel base material.
  • Hinge lifts apart so lid or door may be easily removed.
  • Joint length is 1-5/16".
  • Open width is 1-7/8".
  • Used on cabinet or case where a removable cover is desired uses
  • Uses #6 pan head screws (not included included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

  • Nickel Plated
Click here for Information & Pricing

1-1/4" Steel Take-Apart Hinge

1-1/4
  • Hinge has 2 knuckle design.
  • Hinge slips apart at knuckle so lid or door may be easily removed.
  • Steel base material.
  • Joint length is 1-1/4".
  • Open width is 1-1/2".
  • Uses #6 pan head screws (not included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

  • Nickel Plated
Click here for Information & Pricing

2-1/4" Steel Take-Apart Hinge

2-1/4
  • Hinge lifts apart so lid or door may be easily removed.
  • Joint length is 2-1/4".
  • Open width is 1-7/8".
  • Steel base material.
  • Uses #8 pan head screws (not included but offered for purchase during checkout). Uses 4 screws per hinge.

Finishes:

  • Zinc Plated
Click here for Information & Pricing

1-5/8" Stainless Steel Lift off Hinge

1-5/8
  • Hinges feature a loose joint so that door may be easily removed after installation
  • Hinges are available in a "left hand" or a "right hand" model
  • Hinge shown in photo is a "left hand" hinge
  • Stainless steel base material (type 304 stainless)
  • Hinges are metric so the inch dimensions listed below are approximate. Click on link below for exact metric dimensions.
  • Uses #4 flat head screws (not included but offered for purchase during checkout). Each hinge uses 4 screws.
  • Hinges are sold by "Each". Order 2 each per door.

Finishes:

  • Stainless Steel
Click here for Information & Pricing

Stainless Steel Lift off Hinges

Stainless Steel Lift off Hinges
  • Hinges feature a loose joint so that door may be easily removed after installation
  • Hinges are available in a "left hand" or a "right hand" model
  • Hinge shown in photo is a "left hand" hinge
  • Stainless steel base material (type 304 stainless)
  • Hinges are metric so the inch dimensions listed below are approximate. Click on link below for exact metric dimensions.
  • Uses #4 flat head screws (not included but offered for purchase during checkout). Each hinge uses 6 screws.
  • Hinges are sold by "Each". Order 2 each per door.

Finishes:

  • Stainless Steel
Click here for Information & Pricing

Solid Brass Lift-Off Hinges

Solid Brass Lift-Off Hinges
  • Solid Brass "Lift-off" or "Loose Joint" hinges.
  • Allows opened door to be lifted off without removing the hinges.
  • Available in Left Hand or Right Hand models.
  • All hinges are 1/16" in thickness.
  • Screws are not included. All hinges use #6 flat head screws. Screws are offered for purchase during checkout.
  • 1-1/2" hinge uses 8 screws per pair
  • 2" hinge uses 12 screws per pair
  • 2-3/4" hinge uses 16 screws per pair

Finishes:

  • Polished Brass
  • Polished Chrome
Click here for Information & Pricing