Small Butt Hinges

Small Butt Hinges

  • There are over 200 small butt hinges in this section
  • These hinges are 3" x 3" and smaller
  • Made from solid brass, stainless steel and steel.

Solid Brass Hinges

Solid Brass Hinges
  • Small hinges made from solid brass
  • Over 40 different hinges are available in this section
Click here for Information & Pricing

Precision Butt Hinges, Solid Brass, 1-3/4" x 2-1/2"

Precision Butt Hinges, Solid Brass, 1-3/4
  • Very high quality, solid brass, high precision butt hinges.
  • 7 different finishes
  • Features:
    • Solid brass base material with a beautiful finish.
    • Machined seven knuckle construction.
    • Fixed pin.
    • Center screw hole on each hinge leaf is slotted, allowing for micro adjustment during installation.
    • Available in 7 different finishes (click on link below to see finish examples).
    • Light Antique Brass finish is shown in above image.
    • Hinges are non-swaged.
  • Dimensions:
    • Width is 1-3/4" (hinge measured in open position as in the photo).
    • Height is 2-1/2".
    • Leaf thickness is 3/32".
    • Made for door thicknesses of 7/8" to 1-1/8".
  • Fastener:
    • Two sets of flat head phillips wood screws are included.
    • One set is made from steel and is included as a "Pre-Installation" set of screws.
    • The second set is made from solid brass and is finished to match the hinges.
    • The second set of screws is meant for the permanent installation.
    • Installing the steel screws first, facilitates the installation of the solid brass screws.
    • The permanent screws will install without damaging the finish on the screw head because less force is needed to install them.
    • It is highly recommended that you do not install the permanent brass screws with a power screw driver.
    • The screw size is #6 x 3/4" in length.
Click here for Information & Pricing

Precision Butt Hinges, Solid Brass, 1-1/2" x 2"

Precision Butt Hinges, Solid Brass, 1-1/2
  • Very high quality, solid brass, high precision butt hinges.
  • Features:
    • Solid brass base material with a beautiful finish.
    • Machined seven knuckle construction.
    • Fixed pin.
    • Center screw hole on each hinge leaf is slotted, allowing for micro adjustment during installation.
    • Available in 7 different finishes (click on link below to see finish examples).
    • Dark Antique Brass finish is shown in above image.
    • Hinges are non-swaged.
  • Dimensions:
    • Width is 1-1/2" (hinge measured in open position as in the photo).
    • Height is 2".
    • Leaf thickness is 3/32".
    • Made for door thicknesses of 5/8" to 3/4".
  • Fastener:
    • Two sets of flat head phillips wood screws are included.
    • One set is made from steel and is included as a "Pre-Installation" set of screws.
    • The second set is made from solid brass and is finished to match the hinges.
    • The second set of screws is meant for the permanent installation.
    • Installing the steel screws first, facilitates the installation of the solid brass screws.
    • The permanent screws will install without damaging the finish on the screw head because less force is needed to install them.
    • It is highly recommended that you do not install the permanent brass screws with a power screw driver.
    • The screw size is #5 x 3/4" in length.
Click here for Information & Pricing

Precision Butt Hinges, Solid Brass, 1-1/2" x 2-1/2"

Precision Butt Hinges, Solid Brass, 1-1/2
  • Very high quality, solid brass, high precision butt hinges.
  • 7 different finishes
  • Features:
    • Solid brass base material with a beautiful finish.
    • Machined seven knuckle construction.
    • Fixed pin.
    • Center screw hole on each hinge leaf is slotted, allowing for micro adjustment during installation.
    • Available in 7 different finishes (click on link below to see finish examples).
    • Semi Bright Brass finish is shown in above image.
    • Hinges are non-swaged.
  • Dimensions:
    • Width is 1-1/2" (hinge measured in open position as in the photo).
    • Height is 2-1/2".
    • Leaf thickness is 3/32".
    • Made for door thicknesses of 5/8" to 3/4".
  • Fastener:
    • Two sets of flat head phillips wood screws are included.
    • One set is made from steel and is included as a "Pre-Installation" set of screws.
    • The second set is made from solid brass and is finished to match the hinges.
    • The second set of screws is meant for the permanent installation.
    • Installing the steel screws first, facilitates the installation of the solid brass screws.
    • The permanent screws will install without damaging the finish on the screw head because less force is needed to install them.
    • It is highly recommended that you do not install the permanent brass screws with a power screw driver.
    • The screw size is #5 x 3/4" in length.
Click here for Information & Pricing

Precision Butt Hinges, Solid Brass, 1-3/4" x 2"

Precision Butt Hinges, Solid Brass, 1-3/4
  • Very high quality, solid brass, high precision butt hinges.
  • Features:
    • Solid brass base material with a beautiful finish.
    • Machined seven knuckle construction.
    • Fixed pin.
    • Center screw hole on each hinge leaf is slotted, allowing for micro adjustment during installation.
    • Available in 7 different finishes (click on link below to see finish examples).
    • Polished Nickel finish is shown in above image.
    • Hinges are non-swaged.
  • Dimensions:
    • Width is 1-3/4" (hinge measured in open position as in the photo).
    • Height is 2".
    • Leaf thickness is 3/32".
    • Made for door thicknesses of 7/8" to 1-1/8".
  • Fastener:
    • Two sets of flat head phillips wood screws are included.
    • One set is made from steel and is included as a "Pre-Installation" set of screws.
    • The second set is made from solid brass and is finished to match the hinges.
    • The second set of screws is meant for the permanent installation.
    • Installing the steel screws first, facilitates the installation of the solid brass screws.
    • The permanent screws will install without damaging the finish on the screw head because less force is needed to install them.
    • It is highly recommended that you do not install the permanent brass screws with a power screw driver.
    • The screw size is #6 x 3/4" in length.
Click here for Information & Pricing

Solid Brass Hinges with Ball tips

Solid Brass Hinges with Ball tips
  • Hinges made from solid brass
  • Hinges feature decorative ball tips
  • Over 50 different hinges available in this section
Click here for Information & Pricing

Loose Joint Hinges

Loose Joint Hinges
  • Loose joint hinges allow the door to be easily lifted off of the cabinet.
  • There are 28 different hinges in this section.
Click here for Information & Pricing

Stainless Steel Hinges

Stainless Steel Hinges
  • Hinges made from solid stainless steel
  • Available in 7different styles of hinges
Click here for Information & Pricing

Finial Tipped Hinges

Finial Tipped Hinges
  • Hinges with decorative finial tips
  • 45 different hinges available in this section
Click here for Information & Pricing

Steel Utility Hinges

Steel Utility Hinges
  • Hinges made from steel
  • 28 styles of hinges are available in this section
Click here for Information & Pricing

Brass Utility Hinges

Brass Utility Hinges
  • Small solid brass utility hinges
  • There are 27 different hinges available in this section
Click here for Information & Pricing

Plastic Hinges

Plastic Hinges
8 styles of plastic or nylon hinges
Click here for Information & Pricing
accredited business BBB