Piano Hinge, Aluminum

Piano Hinge, Aluminum

Aluminum piano hinge with screw holes and without screw holes. Also known as continuous hinge.

Aluminum With Holes

Aluminum With Holes
  • Aluminum base material (3003H14 Alloy).
  • Screw holes measure 2 inches center-to-center.
  • Knuckle length is 1/2".
  • Natural finish.
  • Has fairly good anti-corrosion properties.
  • Aluminum is economically priced but not as strong as steel or stainless steel.
  • Screws are not included, but are offered for purchase during checkout (steel screws only). A full length of piano hinge uses about 72 screws per length.

  • IMPORTANT PLEASE READ THE FOLLOWING BEFORE ORDERING:
    • REGARDING OUR CUTTING SERVICE;
      • The first cut on each piece of hinge is free.
      • Each additional cut is $3.00 (limit 5 cuts per hinge).
      • We will ship the remaining parts of any hinge that has been cut.
      • Our cutting blade is approximately 1/16" thick so there is some loss of material with every cut made. For example, a hinge with 5 cuts made will lose 5/16" of material.
      • The hinge knuckles on this product are spaced at 1/2" intervals. Please keep this in mind when sizing your cuts. It is best to ask for a cut at a joint or in the middle of a knuckle. That means that it is really best to ask for cuts that are sized to a whole inch, a 1/2 inch or a 1/4 inch (for example 12" or 12-1/2" or 12-1/4").
      • Hinge that has been cut for you is absolutely not returnable and the order may not be canceled if it has already been cut. In order to meet our promise of "next working day shipping" we are sometimes cutting your hinge within 30 minutes after your order has been placed. If you need to change your order we need to hear from you within 30 minutes of the time the order has been placed. No changes or cancellations may be made after 30 minutes on any hinge cutting order.
      • ACCURACY; we can only promise cutting accuracy to plus or minus 1/8".
    • REGARDING SHIPPING;
      • Piano hinge that is 52" or longer is considered "Oversize" by UPS. There is an additional $9.25 charge added to any piano hinge that is 52" or longer.
      • You can save the $9.25 oversize shipping charge by having your hinge cut to a size below 52". If you order more than one hinge there is only one $9.25 charge per order.

Please Note: UPS does not guarantee delivery times on Next Day, 2nd Day or 3 Day shipments that are oversized. We do not recommend express delivery for piano hinges.

Click here for Information & Pricing

Aluminum Without Holes

Aluminum Without Holes
  • Aluminum base material (3003H14 Alloy).
  • Hinge is blank, there are no screw holes.
  • Knuckle length is 1/2".
  • Has fairly good anti-corrosion properties.
  • Economical but not as strong as steel or stainless steel.

  • IMPORTANT PLEASE READ THE FOLLOWING BEFORE ORDERING:
    • REGARDING OUR CUTTING SERVICE;
      • The first cut on each piece of hinge is free.
      • Each additional cut is $3.00 (limit 5 cuts per hinge).
      • We will ship the remaining parts of any hinge that has been cut.
      • Our cutting blade is approximately 1/16" thick so there is some loss of material with every cut made. For example, a hinge with 5 cuts made will lose 5/16" of material.
      • The hinge knuckles on this product are spaced at 1/2" intervals. Please keep this in mind when sizing your cuts. It is best to ask for a cut at a joint or in the middle of a knuckle. That means that it is really best to ask for cuts that are sized to a whole inch, a 1/2 inch or a 1/4 inch (for example 12" or 12-1/2" or 12-1/4").
      • Hinge that has been cut for you is absolutely not returnable and the order may not be canceled if it has already been cut. In order to meet our promise of "next working day shipping" we are sometimes cutting your hinge within 30 minutes after your order has been placed. If you need to change your order we need to hear from you within 30 minutes of the time the order has been placed. No changes or cancellations may be made after 30 minutes on any hinge cutting order.
      • ACCURACY; we can only promise cutting accuracy to plus or minus 1/8".
    • REGARDING SHIPPING;
      • Piano hinge that is 52" or longer is considered "Oversize" by UPS. There is an additional $9.25 charge added to any piano hinge that is 52" or longer.
      • You can save the $9.25 oversize shipping charge by having your hinge cut to a size below 52". If you order more than one hinge there is only one $9.25 charge per order.

Please Note: UPS does not guarantee delivery times on Next Day, 2nd Day or 3 Day shipments that are oversized. We do not recommend express delivery for piano hinges.

Click here for Information & Pricing