Window Hardware

Window Hardware

  • This section has over 50 items of window hardware.
  • Including
    • Casement window fasteners
    • Screen hangers
    • Sash window weights
    • Quiki Window Control
    • Sash window chain
    • Window restraint chain
    • Sash Window pulleys

Window Screen Hangers

Window Screen Hangers
Hangers to hang screens on the outside of your window frame.
Click here for Information & Pricing

Flush Window Pull

Flush Window Pull
  • Flush pull for windows.
  • Also known as a recessed window pull.
  • Pull measures 3-1/8" by 1-3/8" by 5/16" in depth.
  • Made from solid brass.
  • Includes mounting screws.

Finishes

  • Brushed Nickel
  • Oil Rubbed Bronze
  • Polished Brass
  • Nickelplated
Click here for Information & Pricing

Sash Window Lift

Sash Window Lift
  • Lift for sash windows
  • Lift measures approximately 1-3/4" wide by 1-1/2" tall.
  • Projection is approximately 7/8".
  • Made from solid brass.
  • Wood screws are included

Finishes

  • Polished Brass
  • Antique Brass
  • Polished Nickel
  • Brushed Nickel
  • Chrome Plated
  • Oil Rubbed Bronze
Click here for Information & Pricing

Transom Window Hook

Transom Window Hook
  • Hook for transom windows.
  • Attaches to the end of a pole to allow you to release a remotely located transom window latch.
  • Made from cast brass and polished to a beautiful finish.
  • Hook measures approximately 4-1/8" long by 1-1/2" in diameter.
  • Works with either a 3/4" or 7/8" diameter pole.
  • Includes attachment screw.
Click here for Information & Pricing

Transom Window Chain, 15 Inch

Transom Window Chain, 15 Inch
  • Beautiful heavy duty transom window chain and mounting plates.
  • Used to hold transom windows in the open position.
  • Overall length of chain is 15".
  • Mounting plates measure 1" x 1.5".
  • Chain is made of plated steel.
  • Mounting plates are solid brass.
  • Matching wood screws are included.

Finishes

  • Polished Brass
  • Brushed Nickel
  • Oil Rubbed Bronze
Click here for Information & Pricing

Small Sash Locks, Solid Brass

Small Sash Locks, Solid Brass
  • Small sash locks
  • Available finishes
    • Polished Brass
    • Antique Brass
    • Oil Rubbed Bronze
    • Satin Nickel
Click here for Information & Pricing

Sash Lock, Large, Solid Brass

Sash Lock, Large, Solid Brass
  • Solid brass sash lock, made for sash windows.
  • Lock measures 2-7/8" by 1". Projection is 15/16".
  • Strike measures 2-7/8' by 5/8". Projection is 1-1/4".
  • Solid brass wood screws are included.
  • PLEASE NOTE: Some internal parts are made of plated steel and unplated spring steel.
  • Available in four finishes
    • Antique Brass (as shown in photo)
    • Oil Rubbed Bronze
    • Polished Brass
    • Satin Nickel
Click here for Information & Pricing

Casement Window Fasteners

Casement Window Fasteners
Casement fasteners are available in various finishes.
Click here for Information & Pricing

Transom Window Latch

Transom Window Latch
  • Latch for transom windows.
  • Latch base measures 2-1/8" by 1-3/8". Projection is 1".
  • Latch strike measures approximately 1-3/4" by 1-3/4".
  • Includes latch, strike and mounting screws.
  • Made from solid brass.
  • Available finishes:
    • Oil Rubbed Bronze
    • Polished Brass
    • Brushed Nickel
Click here for Information & Pricing

Casement Window Operators

Casement Window Operators
  • Casement window operator made by Truth.
  • Operator arm attaches to the track channel on the bottom of the window with the round guide "button" located at the end of the operator arm.
  • Operator gear housing attaches to the window frame horizontally rather than vertically to the window sill.
  • Related items (offered for purchase during checkout)
    • Truth crank handle (not included, order separately). Crank handle spline is 5/16" in diameter.
    • Uses 4 each #8 flat head wood screws (not included, order separately). Order White Truth screw.
    • Window track, uses our SKU 997058 track (not included, order separately).
  • Dimensions:
    • Overall length of operator gear housing and arm assembly (not including crank handle), as shown in photo is 12.5".
    • Length of arm is 9.5" (measured from the pivot point to the center of the round guide button on the end of the arm).
    • Gear housing measures 5-1/2" by 11/16" tall by 1-5/8" wide.
    • Guide button diameter is 9/16".
  • Screw Hole spacing. There are two sets of screw holes:
    • The center-to-center spacing for the widest two screw holes is 4-5/16"
    • The center-to-center spacing for the narrowest two screw holes is 3-7/8".
  • Handing:
    • Operators are available in a Left Hand and a Right Hand model.
    • Image in photo is Left Hand model.
    • Click on link to viewRight Hand model.
  • Operator arm and gearsare steel, gear housing is cast zinc.
  • Available Finishes
    • White
    • Chestnut

Please note: Since some suppliers hand their merchandise differently than others, please rely on the photos shown on this web page to determine the hand of operator you need. If you have any questions please email us at info@HardwareSource.com.

Click here for Information & Pricing

Operator for Casement Windows

Operator for Casement Windows
  • Casement window operator.
  • Operator attaches to to the track channel on the bottom of the window with the round guide "button" located at the end of the operator arm.
  • Gear housing is "Square" shaped.
  • Included items:
    • Operator gear housing and arm assembly
    • Crank handle (5/16" spline)
    • Attachment screws
  • Dimensions:
    • Overall length of operator gear housing and arm assembly (not including crank handle), as shown in photo is 11".
    • Length of arm is 9" (measured from the pivot point to the center of the round guide button on the end of the arm).
    • Gear housing measures 4" by 5/8" tall by 1-1/2" wide.
    • Screw hole center-to-center dimension is 3.5" (screw holes on each side of the pivot point).
  • Handing:
    • Operators are available in a Left Hand and a Right Hand model.
    • Image in photo is Left Hand model.
    • Click on link to view Right Hand model.
  • Operator arm is steel, gear housing is cast zinc. Finish is bronze.

Please note: Since some suppliers hand their merchandise differently than others, please rely on the photos shown on this web page to determine the hand of operator you need. If you have any questions please email us at info@HardwareSource.com.

Click here for Information & Pricing

Track for Truth Casement Operator

Track for Truth Casement Operator
  • Replacement track for Truth Casement Operators
  • Fits our SKU numbers 997056 and 997054
  • Fits an operator button dimension of 9/16" diameter by 1/16" thickness
  • Track is 13-3/4" in length, 5/8" in width and 3/16" thick.
  • Uses two each #10 pan head stainless steel screws (not included but offered for purchase during checkout).
  • Made from stainless steel base material.
Click here for Information & Pricing

Window Track for Casement Operator

Window Track for Casement Operator
  • Casement window track
  • Track attaches to bottom of metal framed window and accepts the round "button" on the end of the window casement operator arm.
  • Track Dimensions
    • Length is 13-7/8"
    • Width is 11/16"
    • Thickness is 3/16"
  • Track is available in two models (click on links to view profile closeup of each model)
    • Flat Track Model
    • Right Angle Track Model
  • This track works with our casement operators that have the following SKU numbers
    • 33350, 33352, 70406, 70402, 70404, 70400, 70408, 70410
    • or any operator that has a round button on the end of the operator arm that is 9/16" in diameter and 1/16" thick .
  • Model shown in image is "Flat Track" Model. Right angle track model is very similar. Screw holes are round rather than slotted.
  • Sheet metal screws (3/8" length) are included.
  • Made from aluminum alloy.
Click here for Information & Pricing

Casement Window Operator

Casement Window Operator
  • Casement window operator for metal framed windows.
  • Operator attaches to the metal window frame (facing inside the house). Operator arm extends through a slot in the metal window frame.The round guide buttonat the end of the operator armattaches to a track channel on the underside of the window.
  • Gear housing is "Teardrop" shaped.
  • Included items:
    • Operator gear housing and arm assembly.
    • Crank handle (5/16" spline).
    • Attachment screws.
  • Dimensions:
    • Overall length of operator gear housing and arm assembly, as shown in photo, is 12".
    • Length of arm is 9" (measured from pivot point to center of round guide button on end of arm).
    • Gear housing measures 5-1/8" by 19/32" tall by approximately 1-3/8" wide.
    • There are two sets of screw holes. Screw hole center-to-center spacing is:
      • Set one: 3-13/16"
      • Set two: 4-11/16"
  • Handing:
    • Operators are available in a Left Hand and a Right Hand model.
    • Image in photo is Right Hand model
    • Click on link to vew Left Hand model.
  • Available in three finishes (image in photo is Bronze finish)
    • White
    • Bronze
    • Aluminum (gray)
Click here for Information & Pricing

Operator for Wood Casement Windows

Operator for Wood Casement Windows
  • Casement window operator for wood windows.
  • Made for outswinging window with regular butt hinges.
  • Operator is reversible. Works on left hand or right hand opening windows.
  • This product is a duplicate of the Westco 10C. The Westco 10C is no longer available.
  • Available in two finishes:
    • Zinc Chromate
    • Brass Plated
  • Operator dimensions:
    • Overall length of operator is 12-3/4".
    • Width at gear boxis 1-1/4".
    • Height at gear box is 1".
    • Length of operator arm is 10-3/4" (measured from pivot point of arm).
    • Length of crank handle is approximately 8".
    • Diameter of crank handle is 1/4".
  • Included items:
    • Operator arm and gear box.
    • Bracket for attaching arm to window.
    • Crank handle.
    • Escutcheon plate.
    • Matching wood screws.
  • Made from steel base material.
Click here for Information & Pricing

Extra Crank Handle for Wood Casement Window Operator

Extra Crank Handle for Wood Casement Window Operator
  • Extra Crank Handle for Wood Casement Window Operator
  • Handle is 7.5" in length
  • Handle is made from 1/4" diameter round stock
  • Fits our operator SKUs 33881 and 33880.
  • Also fits the discontinued Westco 10C operator and others.
  • The end of the handle that fits into the Casement Window operator is approximately 1/4" square.
  • Made from steel base material.
  • Brass plated finish
Click here for Information & Pricing

Side Mount Sash Balance

Side Mount Sash Balance
  • Side mount sash balance for sash windows.
  • A sash balance counterbalances the weight of your sash window. This makes raising and lowering the window easy and helps to hold it in place when the window is open.
  • Sash balances replace the older window system of sash cord, weights and pulleys.
  • Each sash balance has a weight rating (usually stamped on the sheet metal housing of the balance). When replacing a broken sash balance make sure to replace your old balance with the same weight rating.
  • Side mount sash balances are sold by the pack. Each pack contains two balances, tension spring guides, installation instructions, and all necessary mounting screws.
  • Made from steel base material.
Click here for Information & Pricing

Twin Sash Balance

Twin Sash Balance
  • Twin sash balances are used on double hung wood sash windows.
  • A sash balance counterbalances the weight of your sash window. Makes raising and lowering the window easy and helps to hold it in place when the window is open.
  • Sash balances replace the older window system of sash cord, weights and pulleys.
  • A twin sash balance is made up of two spring loaded wires and two cable feet per balance. The cable feet attach to the bottom corner of the sash window.
  • Each sash balance has a weight rating (usually stamped on the sheet metal housing of the balance). When replacing a broken sash balance make sure to replace your old balance with the same weight rating.
  • Lighter weight windows may only require one sash balance. Heavier windows will require two. See chart at link below for more specific information.
  • Sash balance measures 7.5" by 3.25" by 3/4".
  • Made of steel base material. Fastening nails, tension spring guides and installation instructions are included.
Click here for Information & Pricing

Casement Window Stays and Adjusters

Casement Window Stays and Adjusters
Casement hardware which will hold your casement window in a fixed position.
Click here for Information & Pricing

Sash Pulley, Solid Brass, 1-5/8"

Sash Pulley, Solid Brass, 1-5/8
  • Beautifully made solid brass sash pulley.
  • For use with sash cord or sash chain.
  • Uses #25 Sash Chain (our SKU 739001), not included but offfered for purchase during checkout.
  • Pulley and face plate are made from solid brass. Pulley housing is made from plated steel.
  • Face plate measures 4.5" by 1". Depth is 1.5".
  • Pulley measures 3/8" wide by 1-5/8" diameter.
  • Screwhole center-to-center distance is 3-7/8".
  • Available in two styles; the square corner mounting plate as shown in photo or radius corner mounting plate (1/2" radius).
  • Matching flat head wood screws are included.

Finishes:

  • Satin Brass
Click here for Information & Pricing

Sash Pulley, Ball Bearing, Solid Brass, 2-1/2"

Sash Pulley, Ball Bearing, Solid Brass, 2-1/2
  • Very high quality solid brass ball bearing sash pulley.
  • Pulley and face plate are made from solid brass. Pulley housing is made from plated steel.
  • For use with sash cord or sash chain.
  • Uses #3 sash chain (our SKU 739000). Not included but offered for purchase during checkout.
  • Available in four faceplate finishes as listed below.
  • Face plate measures 5-3/8" by 1-1/8". Depth is 2-5/16".
  • Pulley measures 1/2" wide by 2-1/2" diameter.
  • Screwhole center-to-center distance is 4-3/8".
  • Matching flat head wood screws are included.

Finishes:

  • Satin Brass
  • Polished Brass
  • Oil Rubbed Bronze
  • Satin Nickel
Click here for Information & Pricing

Sash Pulley, Steel, Push-In Model

Sash Pulley, Steel, Push-In Model
  • Pulley is made for sash windows which use a weight to counterbalance the window.
  • For use with sash cord.
  • Pulley diameter is 2" and pulley width is 3/8".
  • Pulley housing pushes into a 5/8" by 2.5" opening and is held in place by saw teeth on the top and bottom of the housing.
  • Depth of housing and pulley is approximately 1.75".
  • No fasteners required.
  • PLEASE NOTE: At one time this product was available in a brass finish (shown in image). Currently the product is only available in the Oil Rubbed Bronze finish.


Finishes:

  • Oil Rubbed Bronze
  • Brass (no longer available)
Click here for Information & Pricing

Sash Pulley, Steel, Face Plate Model

Sash Pulley, Steel, Face Plate Model
  • Pulley is made for sash windows which use a weight to counterbalance the window.
  • For use with sash cord.
  • Pulley diameter is 2" and pulley width is 3/8".
  • Pulley housing fits in an opening that is approximately 5/8" by 2-3/8".
  • Face plate measures 1" by 4.5". Screw holes are 3-5/8" on center.
  • Depth of housing and pulley is approximately 1.75".
  • Steel base material.
  • Wood screws are not included with this item.

Finishes:

  • Zinc chromate
Click here for Information & Pricing

Window Weights, Sash

Window Weights, Sash
  • For use with sash type windows which are counterbalanced by a weight, sash pulley and sash cord.
  • The sash weight attaches to the sash cord by running the cord through the hole in the weight and by tying a knot on the end of the cord.
  • The knot is held in a cavity on the underside of the weight.
  • Click on link below to view the underside of the weight.

Finishes:

  • Raw Cast Iron
Click here for Information & Pricing

12" Transom Window Chain

12
  • Chain and mounting plates hold transom windows in the open position.
  • Overall length is 12".
  • The attachment plates measure 1.5" x 1".
  • Made from steel base material.
  • Matching wood screws are included.

Finishes:

  • Brass Plated
  • Nickel Plated
  • Oil Rubbed Bronze
Click here for Information & Pricing

Sash Chain

Sash Chain
  • Chain for use in sash type windows with weights.
  • Available in three types:
    • Solid Bronze Material (SKU 739001)
    • Solid Brass Material (SKU 739000)
    • Solid Stainless Steel Material (SKU 739002)
  • Rated Load Limits
    • SKU 739001 - Load limit is 80 lbs
    • SKU 739000 - Load limit is 100 lbs
    • SKU 739002 - Load limit is 225 lbs
  • Each link is approximately 3/4" long by 3/8" wide.
  • Chain is sold by the full foot. For example if you need 4.5 feet please order 5 feet.
  • Sash chain cuts easily with diagonal cutters.

PLEASE NOTE: BECAUSE THIS CHAIN MUST BE CUT OFF A LARGER ROLL OF CHAIN, THIS ITEM IS NOT RETURNABLE FOR ANY REASON.

Click here for Information & Pricing

Quiki Window Control

Quiki Window Control
  • The Quiki window control tightens sash windows when the sash cord is broken.
  • Installs easily between the window frame and the window. No tools necessary for installation.
  • Can be used in new or old double hung windows.
  • Made from 0.018" thick stainless steel.
  • Size is 1-1/4" wide by 6" long.
  • Sold by the package. There are two controls per package.
  • You will need one or two controls per window depending on the weight and condition of the window.

Finishes:

  • Stainless steel
Click here for Information & Pricing

Window Lever, Solid Bronze

Window Lever, Solid Bronze
  • Window lever or latch for casement windows.
  • Made from Solid Bronze material.
  • For use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
  • Supplied with two strike plates for different installation methods. One is a mortise plate for mortising into the edge of the window frame and the other is a surface mounted plate for the surface of the window frame.
    • Dimensions:
      • Mortise plate is 3-3/16" tall by 13/16" wide.
      • Surface plate is 2-3/8" tall by 13/16" wide.
      • Mounting plate for lever is 2-3/8" tall by 13/16" wide.
      • Grip for lever is approximately 3-3/4" long. Projects 1-1/2" from surface.
  • Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link

Click here for Information & Pricing

Casement Window Stay, Solid Bronze

Casement Window Stay, Solid Bronze
  • Casement window stay made from Solid Bronze material.
  • Solid Bronze window stay matches other products from our "Solid Bronze Collection".
  • Casement stay is used to hold a window in various open positions. Keeps wind from opening or closing window.
  • Available in two sizes: 10 inches long and 12 inches long.
  • Sold by the set; a set includes one casement window stay, two latch plates and stainless wood screws coated to match the bronze finish.
  • Mounting plates measure approximately 5/8" by 2".
  • Made from solid bronze material. Bronze is a "living finish". Please click on link below for more info on solid bronze hardware
Click here for Information & Pricing