Skylight Operators by Truth Hardware

Skylight Operators by Truth Hardware

  • Operators for Skylights by Truth Hardware
  • Includes:
    • Manual Operators
    • Operator replacement chain

Truth Manual Skylight Operator, Straight Drive

Truth Manual Skylight Operator, Straight Drive
  • Truth's manual skylight operator is compatible with wood, metal or vinyl framed skylights.
  • The straight drive model is recommended for use where pole operation is required (especially for steep-pitched roofs).
  • For pole operation,see our SKU 800272 for the skylight pole, SKU 800267 or 800270 Loop type crank handles, or SKU 800266 and SKU 800265 Hex ball drive handles (these products are not included but are offered for purchase during checkout).
  • Operator provides the low torque needed to lift a maximum sash weight of 140 lbs with minimum effort.
  • Operator case is made from high-pressure zinc die-cast material and measures 10-3/4" x 2-3/4" x 7/8".
  • Includes chain, clevis pin and removable skylight attachment bracket.
  • Operator case uses 5 each #10 x 1-1/4" flat head screws (not included).
  • The skylight bracket uses #10 flat head screws. Not included but offered for purchase during checkout.
  • Available in White or Chestnut finish.
Click here for Information & Pricing

Truth Manual Skylight Operator, Angle Drive

Truth Manual Skylight Operator, Angle Drive
  • Truth's manual skylight operator is compatible with wood, metal or vinyl framed skylights.
  • The angle drive model is recommended for use on easily accessible installations where the use of the standard crank type handle might be used. Note: skylight poles are sometimes used with this model.
  • Operator provides the low torque needed to lift a maximum sash weight of 140 lbs with minimum effort.
  • Operator case is made from high-pressure zinc die-cast material and measures 10-3/4" x 2-3/4" x 7/8".
  • Includes chain, clevis pin and removable skylight attachment bracket.
  • Operator case uses 5 each #10 x 1-1/4" flat head screws. Not included but offered for purchase during checkout.
  • The skylight bracket uses #10 flat head screws (not included).
  • Available in White or Chestnut finish.
Click here for Information & Pricing

Truth Skylight Chain

Truth Skylight Chain

  • Replacement chain for older models of skylight operators made by Truth Hardware.
  • Chain measures 13.5" by 1/2" by 1/4".
  • Mounting plate measures 2-1/4" by 1/2".
  • Clevis pin is included.
  • Steel base material.
  • Please note: Newer models of Truth Skylight operators cannot be opened to replace the chain. Make sure that your operator has a removable housing to access the chain, if not you may need to replace the entire operator.
Click here for Information & Pricing