accredited business BBB
Truth Entrygard Dual Arm Casement Operator (3-13/16 Inch Short Arm)
Product Information & Specifications
- Replaces operators made by Truth Hardware.
- Available in a Right Hand Model (as shown in the photo) and a Left Hand Model (click on link below to view).
- To compare your existing operator to the one in the photo, crank the spindle until your operator arms match the photo:
- Push the large arm into position and then
- Use the spindle to crank the small arm into position
- Plastic cover, crank handle and Truth wood screws are sold separately. Covers and crank handles are available in 3 different finishes. All 3 items are offered for purchase during checkout. Order from 3 to 7 screws per operator.
- Long arm measures approximately 9-5/8".
- Short arm measures approximately 3-13/16" (This is the measurement of the link at the end of the jointed arm).
- Sash mounting plate measures approximately 2-1/8" by 5".
- Truths Model numbers:
- SKU 997078 (Right Hand Model) is Truth #15.16.00.002
- SKU 997076 (Left Hand Model) is Truth # 15.16.00.001
- The arms of this operator may have the following component numbers stamped on them; 40754, 20755, 31538.
(Please note that these casting numbers are individual component numbers only and may appear on more than one configuration of operator. For this style of operator make sure to verify the Short Arm Measurement)
- Made from die case zinc and finished with a light tan powder coat.
Technical Support Information