Entrygard Window Operators, Truth Hardware

Entrygard Window Operators, Truth Hardware

  • Entrygard Window Operators by Truth Hardware
  • Includes:
    • Dual Arm Entrygard Operators
    • Single Arm Entrygard Operators
    • Dyad Casement Window Operators
    • Maxim Window Operators

Truth Entrygard Dual Arm Casement Operator (4-7/16 Inch Short Arm)

Truth Entrygard Dual Arm Casement Operator (4-7/16 Inch Short Arm)
  • Replaces operators made by Truth Hardware.
  • Available in a Right Hand model (as shown in photo to left) and a Left Hand model (click on link below to view).
  • To compare your operator to the one in the photo, crank the spindle until your operator arms match the photo (when the large arm reaches its final stopped position continue turning the crank until the small arm reaches its final stopped position).
  • Plastic cover, crank handle and Truth wood screws are sold separately. Covers and crank handles are available in 3 finishes. All 3 items are offered for purchase during checkout. Order from 3 to 5 wood screws per operator.
  • Long arm measures approximately 9".
  • Short arm measures approximately 4-7/16" (This is the measurement of the link at the end of the jointed arm).
  • Sash mounting plate measures approximately 2-1/8" by 5".
  • Component numbers that may be stamped on this operator:
    20810, 20544, 40372, 40471, 40254, 40753, 30470, 30472, 40754, L30841, 31358A, 31358, 30637, 30842
    (Please note that these casting numbers are individual component numbersonlyand may appear on more than one configuration of operator. For this style of operator make sure to verify the Short Arm Measurement)

Finishes:

  • Light tan powder coat
Click here for Information & Pricing

Truth Entrygard Dual Arm Casement Operator, Stainless Steel Arms

Truth Entrygard Dual Arm Casement Operator, Stainless Steel Arms
  • Replaces operators made by Truth Hardware.
  • Available in a Left Hand model (as shown in photo to left) and a Right Hand model (click on link below to view).
  • The arms on this operator are made from stainless steel.
    • Stainless steel resists rust, however, it will accumulate rust stains if not cared for properly, especially in coastal areas which have salt air.
    • Proper care includes occasional cleaning of the arm surfaces.
    • A light coat of wax will help keep the salt in the air from causing rust stains.
    • Rust stains can be removed with a mild abrasive like Bar Keepers Friend or polishing compound.
  • This operator is identical to our SKU 800158 (Right Hand) or our SKU 800156 (Left Hand) except that the arms are made of stainless steel material.
  • It is also identical to Truth's model 15.10 operator, except that it has stainless steel arms.
  • To compare your operator to the one in the photo, crank the spindle until your operator arms match the photo (when the large arm reaches its final stopped position continue turning the crank until the small arm reaches its final stopped position).
    • Long arm measures approximately 9".
    • Short arm measures approximately 4-7/16" (This is the measurement of the link at the end of the jointed arm).
    • Sash mounting plate measures approximately 2-1/8" by 5".
  • Plastic cover, crank handle, Truth wood screws and the track for the underside of the window are sold separately.
  • Covers and crank handles are available in 3 finishes.
  • All 4 items are offered for purchase during checkout.
  • Order from 3 to 5 wood screws per operator.

Finishes:

  • Light tan powder coat with stainless steel arms
Click here for Information & Pricing

Truth Entrygard Dual Arm Casement Operator (3-13/16 Inch Short Arm)

Truth Entrygard Dual Arm Casement Operator (3-13/16 Inch Short Arm)
  • Replaces operators made by Truth Hardware.
  • Available in a Right Hand Model (as shown in the photo) and a Left Hand Model (click on link below to view).
  • To compare your existing operator to the one in the photo, crank the spindle until your operator arms match the photo:
    • Push the large arm into position and then
    • Use the spindle to crank the small arm into position
  • Plastic cover, crank handle and Truth wood screws are sold separately. Covers and crank handles are available in 3 different finishes. All 3 items are offered for purchase during checkout. Order from 3 to 7 screws per operator.
  • Measurements:
    • Long arm measures approximately 9-5/8".
    • Short arm measures approximately 3-13/16" (This is the measurement of the link at the end of the jointed arm).
    • Sash mounting plate measures approximately 2-1/8" by 5".
  • Truths Model numbers:
    • SKU 997078 (Right Hand Model) is Truth #15.16.00.002
    • SKU 997076 (Left Hand Model) is Truth # 15.16.00.001
    • The arms of this operator may have the following component numbers stamped on them; 40754, 20755, 31538.
      (Please note that these casting numbers are individual component numbers onlyand may appear on more than one configuration of operator. For this style of operator make sure to verify the Short Arm Measurement)
  • Made from die case zinc and finished with a light tan powder coat.
Click here for Information & Pricing

Entrygard Dual Arm Casement Operator (2-13/16 Inch Short Arm)

Entrygard Dual Arm Casement Operator (2-13/16 Inch Short Arm)


  • Replaces operators made by Truth Hardware.
  • Available in a Right Hand model (as shown in photo to left) and a Left Hand model (click on link below to view).
  • To compare your operator to the one in the photo, crank the spindle until your operator arms match the photo (when the large arm reaches its final stopped position continue turning the crank until the small arm reaches its final stopped position).
  • Plastic cover, crank handle and Truth wood screws are sold separately. Covers and crank handles are available in 3 finishes. All 3 items are offered for purchase during checkout. Order from 3 to 5 wood screws per operator.
  • Long arm measures approximately 9".
  • Short arm measures approximately 2-13/16" (This is the measurement of the link at the end of the jointed arm).
  • Sash mounting plate measures approximately 2-1/8" by 5".
  • Component numbers that may be stamped on this operator:
    20748, 40372, 40471, 40254, 40753, 30470, 30472, 40754, L30841, 31538A, 31538, 30637, 30842
    (Please note that these casting numbers are individual component onlynumbers and may appear on more than one configuration of operator. For this style of operator make sure to verify the Short Arm Measurement)

Finishes:


  • Light tan powder coat

Click here for Information & Pricing

Entrygard Operator, Single Arm, by Truth Hardware

Entrygard Operator, Single Arm, by Truth Hardware
  • Entry Guard operator made by Truth Hardware.
  • Available in Left Hand model as shown in photo and a Right Hand model (click on link to view).
  • Plastic cover, crank handles and screws are sold separately. They are available in 3 finishes and are offered for purchase during checkout. Order 4 screws per operator.
  • Length of arm is approximately 9".
  • Mounting plate measures 5" by 2-1/8".

Finishes:

  • Light tan powder coat
Click here for Information & Pricing

Entrygard Dyad Casement Operator by Truth Hardware

Entrygard Dyad Casement Operator by Truth Hardware
  • Replacement for dyad casement operator by Truth Hardware.
  • Available in Left Hand model (as shown in photo to left) and Right Hand model (click on link below to view).
  • Plastic cover, crank handle and Truth wood screws are sold separately. They are available in 3 finishes and are offered for purchase during checkout.
  • The manufacture recommends using 5 screwsper operator (not included but offered for purchase during checkout).
  • Total length of both arms when fully extended is 7-3/4".
  • Length of linkage arm (arm with SS clip) is 4-7/16"
  • Mounting plate measures 5" x 2".
  • Uses stud brackets: 800172 LH, 800174 RH (Stud Brackets are offered for purchase during checkout)
  • Other numbers that may be stamped on operator: 45275, 20810, 31368, 30637, 30636, 20544 (Please note that these numbers are individual casting numbers only and may appear on more that one styleoperator. If you are unsure you are welcome to send us a photo.)

Finishes:

  • Light tan powder coat
Click here for Information & Pricing

Contour Cover for EntryGard Operators

Contour Cover for EntryGard Operators
  • Plastic cover for Truth EntryGard Window Operators, Contour model
  • Works with MOST "EntryGard" operator that has a plastic removable cover.
  • Dimensions:
    • Length is 5-1/4".
    • Width is approximately 1-1/4"
    • Projection is approximately 1-1/8".
  • Color is white.
Click here for Information & Pricing

Truth Regular Plastic Cover for Operators

Truth Regular Plastic Cover for Operators
Plastic cover for Truth casement operators. Cover measures approximately 5-1/4" long by 1-1/8" tall and projects about 1-3/8". Available in 3 Truth colors. Color shown in photo is Bronze.
Click here for Information & Pricing