accredited business BBB
Frequently Asked Questions
  • How do I estimate hinge weight capacity?

  • What about Installation Instructions?

  • What is a pair of hinges?

  • Can you match my screw hole patterns?

  • How much is shipping?

Weld-On Spring Hinge

Weld-On Spring Hinge

Product Information & Specifications

  • Heavy duty self closing weld-on hinge.
  • With this hinge, you no longer need a separate closer for jobs that require a self closing gate.
  • The closer is built right into the hinge.
  • Ideal for panic bar installations.
  • Closes in one direction only (not for gates needing to swing in both directions).
  • Hinge set works with either round or flat gate posts (weldable surface is slightly indented)
  • Weight rated for up to a 2000 lb gate.
  • Dimensions:
    • Top Hinge
      • Approximately 4" tall
      • Approximately 3" wide (gap between post and gate frame is adjustable 2-1/2" to 3")
      • Approximately 1-1/2" thick
      • For more detailed dimensions, click on link below
    • Bottom Hinge
      • Approximately 5" tall
      • Approximately 3" wide (gap between post and gate frame is adjustable 2-1/2" to 3")
      • Approximately 1-1/2" thick
      • For more detailed dimensions, click on link below
  • Features:
    • Maintenance-free bearings
    • Adjustable spring tension
    • Adjustable yoke (1/2" of adjustability)
    • One page instruction sheet
    • Made from steel and zinc chromate plated
  • Sold by the set. A set includes a top hinge (non-spring loaded) and a bottom spring-loaded hinge. A set is what you need to hang one gate or door.

IMPORTANT INFORMATION: A pair of these hinges will support the weight of a 2000 lb gate. However, there are a number of factors that determine whether the gate will self-close using this hinge set. Those factors include the weight of the gate, the height and width of the gate, the quality of the weld job and average wind speeds in the area. The manufacturer does not offer any guidance regarding the self closing ability of this hinge. We highly recommend using very conservative gate weights when considering this hinge.

PLEASE NOTE: This hinge is unique and requires very special care when installing for the self closing feature to work properly.
Gate Post: The gate post that the hinge is attached to must be installed so that is is perfectly plumb.
Alignment: The centerline of the hinge pins of both hinges (top and bottom hinge) after installation, must be in exact alignment to each other (tolerance not to exceed plus or minus 1/16").


FinishSKUPriceQtyUnit
Zinc Chromate Plated980014$209.00
Set
SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment
Click here for BBB Business Review